Shelly Dimmer 0/1-10V PM Gen3 User and Safety Guide

Product Overview

The Shelly Dimmer 0/1-10V PM Gen3 is a smart dimming controller designed for remote control of dimming drivers. It supports 0-10V and 1-10V driver types and can operate standalone or integrate with cloud home automation services.

It features an embedded web interface accessible at http://192.168.33.1 or its IP address on a local network. The device can interact with other smart devices and offers APIs for integration and cloud control.

Shelly Europe Ltd. provides free firmware updates to ensure the device remains updated and secure. Users are responsible for installing these updates.

Safety Information

⚠️ WARNING! Risk of electric shock. Installation of the Device to the power grid must be performed carefully by a qualified electrician.

ℹ️ CAUTION! Before installing the Device, turn the circuit breakers off. Use a suitable test device to ensure no voltage is present on the wires before connecting.

⚠️ WARNING! Before making any changes to the connections, ensure there is no voltage present at the Device terminals.

ℹ️ CAUTION! Connect the Device only as shown in the instructions. Any other method could cause damage or injury.

ℹ️ CAUTION! Connect the Device only to a power grid and appliances that comply with all applicable regulations. Short circuits can cause fire, property damage, and electric shock.

ℹ️ CAUTION! The Device must be secured by a cable protection switch in accordance with EN60898-1 (tripping characteristic B or C, max. 16A rated current, min. 6 kA interrupting rating, energy limiting class 3).

ℹ️ CAUTION! Do not use the Device if it shows any sign of damage or defect.

ℹ️ CAUTION! The Device may only be connected to and control electric circuits and appliances that comply with applicable standards and safety norms.

ℹ️ CAUTION! The Device is intended only for indoor use.

ℹ️ CAUTION! Keep the Device away from dirt and moisture.

Wiring Diagram Description

The wiring diagram illustrates the connections for the Shelly Dimmer 0/1-10V PM Gen3. The device has terminals for power input (L, N), relay output (O), switch inputs (S1, S2), and 0-10V control outputs (Dim+, Dim-, V+, V-).

Device Terminals:
- +: 0-10 VDC positive terminal
- -: 0-10 VDC negative terminal
- O: Relay output
- S1: Switch/button input terminal for light control
- S2: Switch/button input terminal for light control
- L: Live (110-240 V) terminal
- N: Neutral terminal
- Dim+ / Dim-: Positive/negative terminal of the LED driver
- V+ / V-: Positive/negative output of the LED driver
Wires:
- N: Neutral wire
- L: Live (110-240 V) wire

Connections:

Connect the Device's positive output (+) to the LED driver's positive input (Dim+).
Connect the Device's negative output (-) to the LED driver's negative input (Dim-).
Connect the Live wire to the Device's L terminal and the Neutral wire to the Device's N terminal and the LED driver's N terminal.
Connect the Device's relay output O to the LED driver's L terminal.
Connect switches or buttons to the Device's S1 and S2 terminals and the Live wire.

The device supports single or dual-button modes, or a single switch mode. In single input mode, S2 is typically detached.

Connect the LED driver to the LED lights according to the LED driver manufacturer's instructions.

Installation Instructions

For connections, solid single-core wires or stranded wires with ferrules are recommended. Wires should have insulation with increased heat resistance, not less than PVC T105°C (221°F).

Ensure correct conductor cross-section and stripped length for terminal connections. Do not connect multiple wires into a single terminal.

For security, after connecting to Wi-Fi, it is recommended to disable or password-protect the Device's Access Point (AP).

To perform a factory reset: Press and hold the Control button for 10 seconds.
To enable AP and Bluetooth: Press and hold the Control button for 5 seconds.

Specifications

Feature	Specification
Size (HxWxD)	38.5x43.5x17mm / 1.52x1.71x0.67in
Weight	28.5 g / 0.99 oz
Screw terminals max torque	0.4 Nm / 3.5 lbin
Conductor cross section	0.2 to 2.5 mm² / 24 to 14 AWG (solid, stranded, and bootlace ferrules)
Conductor stripped length	5 to 6 mm / 0.20 to 0.24 in
Mounting	Wall console/behind wall/ceiling construction
Shell material	Plastic
Ambient working temperature	-20°C to 40°C / -5°F to 105°F
Humidity	30% to 70% RH
Max. altitude	2000 m / 6562 ft
Power supply	110-240 V~ 50/60 Hz
Power consumption	< 1.5 W
External protection	16A, tripping characteristic B or C, 6 kA interrupting rating, energy limiting class 3
Max. switching voltage	240 V~
Max. switching current	13 A
Max. control current	35 mA
Voltmeter (AC)	110 - 240 V
Ammeter (AC)	50 mA - 16 A
Meters accuracy	±10%
Power and energy meters	Active and apparent power, Active and apparent energy, Power factor
Measurement data storage	No
Internal-temperature sensor	Yes
Wi-Fi Protocol	802.11 b/g/n
Wi-Fi RF band	2401-2495 MHz
Wi-Fi Max. RF power	< 20 dBm
Wi-Fi Range	Up to 30 m / 100 ft indoors and up to 50 m / 160 ft outdoors
Bluetooth Protocol	4.2
Bluetooth RF band	2400-2483.5 MHz
Bluetooth Max. RF power	< 4 dBm
Bluetooth Range	Up to 30 m / 100 ft outdoors, up to 10 m / 33 ft indoors
CPU	ESP-Shelly-C38F
Clock frequency	40 Mhz
Flash	8MB
Schedules	20
Webhooks (URL actions)	20 with 5 URLs per hook
Scripting	Yes
MQTT	Yes
Advanced schedules	Yes
KVS (Key-Value Store)	Yes

Shelly Cloud Inclusion

The Device can be monitored, controlled, and set up via the Shelly Cloud home automation service using Android, iOS, or Harmony OS mobile applications, or via a web browser at https://control.shelly.cloud/.

Instructions for connecting the Device to the Cloud and controlling it via the Shelly app are available in the application guide: https://shelly.link/app-guide.

The Shelly mobile application and Shelly Cloud service are optional; the Device can function standalone or with other home automation platforms.

Troubleshooting

For assistance with installation or operation issues, consult the device's knowledge base page: https://shelly.link/dimmer_0/1-10V_PM_Gen3.

Declaration of Conformity

Shelly Europe Ltd. declares that the radio equipment type Shelly Dimmer 0/1-10V PM Gen3 complies with Directive 2014/53/EU, 2014/35/EU, 2014/30/EU, and 2011/65/EU.

The full text of the EU declaration of conformity is available at: https://shelly.link/dimmer_0/1-10V_PM_Gen3_DoC.

Manufacturer Information

Manufacturer: Shelly Europe Ltd.

Address: 103 Cherni vrah Blvd., 1407 Sofia, Bulgaria

Tel: +359 2 988 7435

E-mail: support@shelly.cloud

Official website: https://www.shelly.com

Contact information updates are published on the official website.

All rights to the trademark Shelly® and associated intellectual property belong to Shelly Europe Ltd.

	Shelly Pro Dimmer 0/1-10V PM: Smart DIN Dimmer Controller - User & Safety Guide Comprehensive user and safety guide for the Shelly Pro Dimmer 0/1-10V PM, a smart DIN-mountable dimming controller. Learn about installation, specifications, features, and safety precautions.
	Shelly Gen3 Smart Relays and Dimmers: Comprehensive Comparison Compare key features, specifications, and use cases for Shelly Gen3 smart relays and dimmers, including Shelly 1, 1PM, 2PM, Dimmer, i4, Dimmer 0/1-10V PM, and EM models.
	Shelly Plus 0-10V Dimmer: Smart Lighting Controller User and Safety Guide Comprehensive user and safety guide for the Shelly Plus 0-10V Dimmer. Learn about its features, installation, specifications, and safe operation for smart 0-10V lighting control.
	Shelly Plus 0-10V Dimmer User and Safety Guide This guide provides essential technical and safety information for the Shelly Plus 0-10V Dimmer, a smart 0-10V dimming controller. Learn about its features, installation, and safe usage.
	EU Declaration of Conformity for Shelly Pro Dimmer 0/1-10V PM This document confirms the Shelly Pro Dimmer 0/1-10V PM smart DIN-mountable dimming controller's compliance with key European Union directives, including EMC, LVD, RED, and RoHS 2.0, based on adherence to harmonized standards.
	Shelly Dimmer 0/1-10V PM Gen3: Smart Dimming Controller User and Safety Guide Comprehensive user and safety guide for the Shelly Dimmer 0/1-10V PM Gen3, a smart 0/1-10V dimming controller. Includes safety information, product description, installation instructions, technical specifications, Wi-Fi and Bluetooth details, Shelly Cloud integration, troubleshooting, and declaration of conformity.
	Shelly Smart Home Automation Systems Product Catalogue Explore the comprehensive Shelly product catalogue, featuring innovative smart home automation devices for lighting, energy management, and more. Discover how Shelly enhances comfort, efficiency, and control in homes and offices.
	EU Declaration of Conformity - Shelly Plus 0-10V Dimmer Official EU Declaration of Conformity for the Shelly Plus 0-10V Dimmer, confirming compliance with EMC, LVD, RED, and RoHS directives by Shelly Europe Ltd.