Shelly Pro Dimmer 0/1-10V PM
Smart DIN-mountable dimming controller
Safety Information
- ⚠️ WARNING! Risk of electric shock. Installation of the Device to the power grid must be performed carefully by a qualified electrician.
- ⚠️ WARNING! Before making any changes to the connections, ensure there is no voltage present at the Device terminals.
- ❗ CAUTION! Plug in or unplug the LAN cable only when the Device is powered off. The parts of the LAN cable that may be touched when plugging in or unplugging it, must not be metallic.
- ❗ CAUTION! Connect the Device only in the way shown in these instructions. Any other method could cause damage and/or injury.
- ❗ CAUTION! Connect the Device only to a power grid and appliances that comply with all applicable regulations. A short circuit in the power grid or any appliance connected to the Device can cause fire, property damage, and electric shock.
- ❗ CAUTION! The Device and the appliances connected to it, must be secured by a cable protection switch in accordance with EN60898-1 (tripping characteristic B or C, max. 16A rated current, min. 6 kA interrupting rating, energy limiting class 3).
- ⚠️ WARNING! Before installing the Device, turn the circuit breakers off. Use a suitable test device to make sure there is no voltage on the wires you want to connect. When you are sure that there is no voltage, proceed to the installation.
- ❗ CAUTION! Do not use the Device if it shows any sign of damage or defect.
- ❗ CAUTION! The Device may be connected to and control only electric circuits and appliances that comply with the applicable standards and safety norms.
- ❗ CAUTION! The Device is intended only for indoor use.
- ❗ CAUTION! Keep the Device away from dirt and moisture.
Product Description
The Shelly Pro Dimmer 0/1-10V PM (the Device) is a smart DIN-mountable dimming controller that allows remote management of dimming drivers via a mobile phone, tablet, PC, or home automation system. It can operate standalone in a local Wi-Fi network or through cloud home automation services. The device supports both 0-10V and 1-10V types of drivers. It features an embedded web interface for monitoring, control, and adjustment, accessible directly via its access point (http://192.168.33.1) or its IP address on your network. The Device can interact with other smart devices or automation systems within the same network infrastructure. Shelly Europe Ltd. provides APIs for device integration and cloud control, available at https://shelly-api-docs.shelly.cloud/.
The Device comes with factory-installed firmware. Shelly Europe Ltd. provides free firmware updates to keep it secure and up-to-date. Updates can be accessed via the embedded web interface or the Shelly Smart Control mobile application. Users are responsible for installing firmware updates in a timely manner; Shelly Europe Ltd. is not liable for non-conformity due to failure to update.
Wiring Diagram
Legend
- V- / V+: Positive/negative output terminals for the LED driver.
- N: Neutral terminal.
- L: Live (110-240 V) terminal.
- Dim- / Dim+: Negative/positive terminal of the LED driver.
- O: Relay output terminal.
- I: Relay input terminal.
- SW1 / SW2: Switch/button input terminals for light control.
- LAN: Local Area Network RJ45 connector.
- Power: Indicates power input.
- Wi-Fi: Indicates Wi-Fi status.
- LAN: Indicates LAN connection status.
- Out: Indicates relay output status.
- Reset: Reset button.
Connections Description
The diagram shows a DIN-mountable device with various terminals. Power input (L, N) is connected to the device. The relay output (O) connects to the LED driver's live terminal (L). The device's dimmer output terminals (Dim+, Dim-) connect to the LED driver's positive and negative terminals, respectively. The device also provides V+ and V- terminals, which appear to be for powering the LED driver or providing a voltage output. Input terminals (SW1, SW2) are for connecting switches or buttons. A LAN port is also available. The diagram visually depicts these connections, with wires labeled L, N, Dim+, Dim-, O, I, SW1, SW2, V+, V-, connecting to the corresponding terminals on the device and the LED driver.
Note on Diagram: The diagram illustrates the physical layout of terminals for connecting power, LED drivers, and control switches. Specific wire colors (N: Neutral wire, L: Live wire) are mentioned in the text.
Installation Instructions
Use solid single-core wires or stranded wires with ferrules. Ensure wires have insulation with increased heat resistance (min. PVC T105°C / 221°F).
For security, after connecting to Wi-Fi, disable or password-protect the Device's Access Point (AP).
- Factory Reset: Press and hold the Reset/control button for 10 seconds.
- Activate AP/Bluetooth: Press and hold the Reset/control button for 5 seconds.
Connection Steps:
- Connect the Device's positive output (+) to the LED driver's positive input (Dim+).
- Connect the Device's negative output (-) to the LED driver's negative input (Dim-).
- Connect the Live wire to the Device's L terminal and to the Device's I terminal.
- Connect the Neutral wire to the Device's N terminal and to the LED driver's N terminal.
- Connect the Device's relay output O to the LED driver's L terminal.
- Connect switches or buttons to the Device's SW1 and SW2 terminals and the Live wire. The Device supports single or dual-button modes, or a single switch mode (SW2 detached in single input mode).
- Connect the LED driver to the LED lights according to the LED driver manufacturer's instructions.
Specifications
| Feature | Value |
|---|---|
| Dimensions (HxWxD) | 94x19x69 mm / 3.70x0.75x2.71 in |
| Weight | 70 g / 2.5 oz |
| Screw terminals max torque | 0.4 Nm / 3.54 lbin |
| Mounting | DIN |
| Shell material | Plastic |
| Shell color | Blue |
| Print color | White |
| Connectors color | Green, blue |
| Ambient working temperature | -20°C to 40°C / -5°F to 105°F |
| Humidity | 30% to 70% RH |
| Max. altitude | 2000 m / 6562 ft |
| Power supply | 110-240 V |
| Power consumption | < 3 W |
| Neutral not needed | No |
| 0-10V/1-10V voltage control type | Current sourcing |
| External protection | 16 A, tripping characteristic B or C, 6 kA interrupting rating, energy limiting class 3 |
| Max. switching voltage | 240 V |
| Max. switching current | 16 A |
| Voltmeter (AC) | Yes |
| Ammeter (AC) | Yes |
| Power and energy meters | Active and apparent power, Active and apparent energy, Power factor, Fundamental active and fundamental reactive energy |
| Measurement data storage | No |
| Internal-temperature sensor | Yes |
| Wi-Fi Protocol | 802.11 b/g/n |
| Wi-Fi RF band | 2412-2472 MHz |
| Wi-Fi Max. RF power | < 20 dBm |
| Wi-Fi Range | Up to 30 m / 100 ft indoors and up to 50 m / 160 ft outdoors (depending on local conditions) |
| Bluetooth Protocol | 4.2 |
| Bluetooth RF band | 2402-2480 MHz |
| Bluetooth Max. RF power | < 4 dBm |
| Bluetooth Range | Up to 30 m / 100 ft outdoors, up to 10 m / 33 ft indoors (depending on local conditions) |
| CPU | ESP32-D0WDQ6 |
| Clock frequency | 40 Mhz |
| Flash | 8MB |
| Schedules | 20 |
| Webhooks (URL actions) | 20 with 5 URLs per hook |
| Scripting | Yes |
| MQTT | Yes |
| Advanced schedules | Yes |
| KVS (Key-Value Store) | Yes |
Shelly Cloud Inclusion
The Device can be monitored, controlled, and set up through the Shelly Cloud home automation service. Use the service via the Android, iOS, or Harmony OS mobile application, or any internet browser at https://control.shelly.cloud/. For instructions on connecting and controlling the Device with the Shelly app and Cloud service, refer to the application guide: https://shelly.link/app-guide. The Shelly mobile application and Shelly Cloud service are not required for the Device to function properly; it can be used standalone or with other home automation platforms.
Troubleshooting
For any issues with the installation or operation of the Device, consult its knowledge base page: https://shelly.link/pro_dimmer_0/1-10V_PM.
Declaration of Conformity
Hereby, Shelly Europe Ltd. declares that the radio equipment type Shelly Pro Dimmer 0/1-10V PM is in compliance with Directive 2014/53/EU, 2014/35/EU, 2014/30/EU, 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://shelly.link/pro_dimmer_0/1-10V_PM_DoC.
Manufacturer: Shelly Europe Ltd.
Address: 103 Cherni Vrah Blvd., 1407 Sofia, Bulgaria
Tel: +359 2 988 7435
E-mail: support@shelly.cloud
Official website: https://www.shelly.com
Changes in contact information are published by the Manufacturer on the official website. All rights to the trademark Shelly® and other intellectual rights associated with this Device belong to Shelly Europe Ltd.
