Total Knapsack Sprayer

Original Instructions

Warning

• This sprayer is not to be used with solvents, caustic chemicals, acids or concrete curing products.
• Do not use flammables in this sprayer.

Safety Instructions

• Read Product Manual completely before operating this sprayer.
• Always refer to mixing and safety instructions as specified by chemical supplier.
• Always wear protective gloves, clothing and safety goggles whilst preparing, operating and cleaning this sprayer.
• Prior to use inspect hose and all hose connections. A damaged hose, or loose hose connection can result in unintended exposure to the pressurized chemical, resulting in serious injury or property damage.
• Do not lift or carry sprayer by the hose, or wand extension. Lift by tank handle or carry straps only.
• Avoid spraying in windy conditions to prevent drift of chemicals.
• Keep the sprayer and all chemicals out of the reach of children.

Contents

1. Pump Lever Brace
2. Pump Lever Handle
3. Pump Assembly
4. Spray Nozzle (3 Options: Single Adjustable, Double Adjustable and fan)
5. Trigger
6. Hose
7. Filling Cap
8. Carry Straps
9. Tank
10. Tank Base

Operating Instructions

1. Before filling always check that the sprayer's shoulder straps are correctly fitted and adjusted so that the sprayer sits comfortably on your back.
2. Fit the appropriate spray nozzle for the spray pattern required.
3. Unscrew the filler cap but do not remove the internal strainer.
4. Fill tank with required liquid to required level. Do not exceed the “MAX” fill level on tank.
5. Replace the filler cap and tighten. Ensure all other fittings are tightened before use.
6. Pressurize the sprayer by pumping lever handle 6-8 times. Stop pumping if it becomes difficult to pump as you do not want to over pressurize.
7. Start spraying by holding down the trigger. For continuous spraying the trigger can be locked.
8. Continue operating the pump handle using a steady motion to maintain pressure in the sprayer pump whilst spraying.

Cleaning Instructions

For sprayer longevity please follow these instructions after every use:

• Release pressure via trigger.
• Empty any left over contents in a safe manner.
• Note: Even if tank is empty there may be residual liquid in pump chamber. Empty chamber by locking trigger and continuously pumping handle a few times.
• Fill tank 1/4 full with clean water.
• Pressurise and then hold trigger down to empty entire tank via nozzle.
• Thoroughly rinse all components with clean water.
• Periodically clean the inline filter inside trigger to avoid blockages. This can be done by unscrewing hose from trigger and pulling out the filter from trigger handle. Rinse under clean water and reattach to trigger handle, tightening firmly.

Storage

• Do not store with contents in tank. This will destroy your sprayer mechanism.
• Do not store pressurised. Lift safety valve to release pressure.
• Store out of sunlight.

Troubleshooting

For video demonstration, scan the QR code. Follow Total Tools World on Facebook and Instagram.

Visit www.totalbusiness.com for more information.

Manufactured by TOTAL TOOLS CO., PTE. LTD. No. 45 Songbei Road, Suzhou Industrial Park, China.

Made in China

Model Number: T1222.V01