EPIC ES-K70 Digital Door Lock User Manual

Safety Precautions

• Please do not repair the product by yourself.
• Please check the environment before installation.
• Please read the manual carefully before using.
• Please change your PIN number periodically.
• Please do not knock or apply force on the lock.
• Protect the product from wetness & moisture.
• Please replace all batteries at once.
• Clean the lock with a clean dry cloth.
• Please use the product correspondingly.

Product Dimension

Product Description (Outer body)

• Number pad
• Status LED lamp
• 9V emergency battery terminal
• Battery lamp
• RFID card reader
• Mechanical key hole cover
• Reset button
• Alkaline AA Battery compartment
• Registration button
• Open/Close button
• Dual lock button
• Outer body handle

Product Description (Inner body)

• Battery cover
• Inner body handle

PIN Number Registration

Default PIN Number: [1, 2, 3, 4]. Please change to a new PIN Number. Ensure not to use consecutive or repetitive numbers for your safety.

To change existing PIN number:

1. Open battery cover.
2. Press [Registration] button once. A beep sound will be heard.
3. Enter current PIN number followed by the [ ] button.
4. Press number [1] button.
5. Enter new PIN number (4~12 digits).
6. Press the [ ] button on the number pad. A melody will be heard, and the registration is complete.

Note: Please register the PIN number within 10 seconds after pressing the registration button, or the registration process will be cancelled. New registration of a single PIN number will delete all previously registered PIN numbers on the system.

RFID Card Registration (all-at-once)

Note: New RFID cards are registered without erasing previous registration records. RFID cards included inside the box are not registered by default. Only compatible cards can be registered and used.

1. Open battery cover.
2. Press [Registration] button once. A beep sound will be heard.
3. Enter current PIN number, followed by the [ ] button.
4. Press number [2] button.
5. Place the card to be registered on the card reader. A beep sound will be heard, and the saved 3-digit location number (001~100) will be displayed on the number pad.
6. Press [Registration] button after all cards have been registered, and the registration is complete.

Note: Up to 100 RFID cards can be registered. To register multiple RFID cards, repeat step 4 before the number pad turns off. Place RFID cards on the card reader within 10 seconds after pressing the [Registration] button, or the registration process will be cancelled. No more RFID cards can be registered after the 100th registration.

RFID Card Registration (one-by-one)

Note: The card location number should be from 001~100 and must consist of 3 digits always.

1. Open battery cover.
2. Press [Registration] button once. A beep sound will be heard.
3. Enter current PIN number, followed by the [ ] button.
4. Press number [2] button.
5. Enter the card location number consisting of 3 digits (001~100), followed by the [ ] button.
6. When the number pad arrow is displayed, it is in RFID card entry standby status. Place the card to be registered on the card reader. A beep sound will be heard, and the saved 3-digit location number will be displayed on the number pad.
7. To register additional RFID cards: When all numbers on the pad are lighted, enter a new location number, followed by the [ ] button, then register the new card.
8. When there are no additional cards to be registered: Press the [Registration] button to complete the registration.

RFID Card Deletion (all-at-once)

1. Open battery cover.
2. Press [Registration] button once. A beep sound will be heard.
3. Enter current PIN number, followed by the [ ] button.
4. Press number [8] button.
5. Long press the [ ] button for 5 seconds. When the melody is heard, all RFID cards are deleted.

RFID Card Deletion (one-by-one)

1. Open battery cover.
2. Press [Registration] button once. A beep sound will be heard.
3. Enter current PIN number, followed by the [ ] button.
4. Press number [8] button, followed by the [ ] button.
5. Enter the registered card location number, followed by the [ ] button.
6. After deletion is complete, all numbers are lighted on the number pad. Additional card deletion is in standby mode. If there is no location number to be deleted, press the [Registration] button.

Guest PIN Number Registration

1. Open battery cover.
2. Press [Registration] button once. A beep sound will be heard.
3. Enter current PIN number, followed by the [ ] button.
4. Press number [3] button.
5. Enter new guest PIN number (4~12 digits) and press the [ ] button to complete the registration.

Note: The guest PIN number is for 1-time entry only. New registration will delete the old guest PIN number. When the registration mode is cancelled, the old PIN number will be restored.

Random Number Feature

The random number feature is enabled by default. This is a security feature that prevents the PIN number from being exposed by adding random numbers before or after the original PIN number. The total number of digits entered, including the PIN number, should not exceed 20 digits.

Methods for opening the door using random numbers:

• Method 1: Touch the number pad, enter any random number, enter PIN number, press [ ] button.
• Method 2: Touch the number pad, enter PIN number, enter any random number, press [ ] button.
• Method 3: Enter any random number + Enter PIN number + [ ] button.
• Method 4: Enter PIN Number + Press [ ] button + Place the card to be registered on the card reader.

The door will open when the melody is heard.

Dual-mode Security Feature Setting

The PIN number & RFID card should be registered first before setting this feature.

1. Press [Registration] button for 5 seconds. The entire LED will light up after 3 seconds, the alarm will stop, and after 2 seconds, it will be on again.
2. Enter current PIN number. When you press the [ ] button, the front panel LED will blink and light up.
3. Press [1] button to Turn-Off Dual-Mode Security.
4. Press [3] button to Turn-On Dual-Mode Security.

Note: During Dual-mode Security Setting, when the confirmation sound is heard, everything will be turned off.

Opening Door Outside

• Method 1: Opening by PIN number
  Enter PIN number + Press [ ] button. The door will open.
• Method 2: Opening by RFID card
  Place registered RFID card on the reader. The door will open.
• Method 3: Opening by random number
  Enter any random number + Enter PIN number + [ ] button. The door will open.
• Method 4: Opening by Dual-mode Security
  Enter PIN Number + Press [ ] button + Place the card to be registered on the card reader. The door will open.

Closing Door Outside

• Method 1: Automatic lock mode
  The door will lock automatically after 2 seconds of closing the door.
• Method 2: Manual lock mode
  Touch the number pad and the door will lock.

Opening Door Inside

• While the door is closed, turn the handle in a downward motion, and the door will open.

Note: Turn the handle downward within 7 seconds of opening the door, or the door will lock again.

Caution: Do not install on inside-pulling doors.

Closing Door from Inside

• Method 1: Automatic lock mode
  The door will lock automatically after 2 seconds of closing the door.
• Method 2: Manual lock mode
  After closing the door, press the [Open / Close] button and the door will lock.

Note: In manual mode, when the [Manual Lock] button is pressed, a beep sound will be heard to signal that the door is locked.

Forced-Lock Feature

Inside double lock: When enabled, this will not allow PIN or Card entry from the outside.

Setting:

1. After closing the door.
2. Press the [Safety button] located on the inner body for 3 seconds. A melody will be heard, and the setting is complete.

Cancellation:

1. Turn the inner body handle in a downward motion inside, and the double lock setting will be cancelled.

Automatic / Manual Lock Setting

An optional feature that lets you set the lock in automatic and manual lock mode.

Setting:

• While the door is partially opened.
• Press the [Open/Close] button for 2 seconds. When the deadbolt comes out of the mortise.
• Press [1] button for Automatic Mode.
• Press [3] button for Manual Mode.

Note: Automatic Lock Mode is set by default. In Manual Lock Mode, the door will not lock automatically after closing the door. Instead, touch the number pad outside or press the [Open / Close] button inside to lock the door.

RFID Card Automatic / Manual Detection Setting

An optional feature that lets you set the RFID Card detection to automatic and manual mode.

• Setting:
• Touch the number pad.
• Enter the PIN number.
• Press the [#] button 2 times.
• Press [4] button for Automatic Mode.
• Press [7] button for Manual Mode.

Note:

• In Automatic Mode, place the RFID Card on the card reader and the door will open.
• In Manual Mode, touch the number pad, then place the RFID Card on the card reader and the door will open.

Note: Automatic Mode is enabled by default.

Home Network Module & Remote Control Setting

This feature lets you open the door remotely via home network devices and remote control (Optional).

Home Network Module and Remote Control setting procedure is the same.

Registration:

1. Press [Reg] button.
2. Enter pin number, followed by [ ] button.
3. Press [ ] button on the number pad. A beep melody will be heard, and registration is complete.

Note: For registration of additional remote controls, repeat step number 2. Up to 5 remote controls can be registered.

Deletion:

1. Press [Reg] button.
2. Press [ ] button for 5 seconds.
3. Enter pin number, followed by [ ] button.
4. Press [0] button. When the melody is heard, deletion is complete.

Note: New registration of a single remote control will delete previously registered ones. This method can be used as an alternative in deleting remote controls.

Sound Mute Function

Regardless of the volume setting, this feature lets you mute the operation melody. This is for 1-time usage only. The operation sound will occur on the next operation.

• Touch the number pad, press the [ ] button. (In mute state)
• Enter PIN number, press [ ] button, door will open. (Number pad will blink)

Sound Volume Setting

This feature allows the user to adjust the operation sound volume per level. (Perform while door is closed). Sound can be adjusted up to 7 levels.

• Touch the number pad.
• Enter registered PIN number.
• Press [3] button to increase sound.
• Press [6] button to decrease sound.

Note: In mute mode, the number pad will blink when you press a number. The volume level is set to high by default.

Mechanical Key

Note: Opening the door when the lock is not functioning normally.

1. Open the emergency key hole located at the top of the front body handle by pushing the cover to the right direction.
2. Insert the emergency key in the hole.
3. Turn from right to left. When the "tik" sound is heard and the deadbolt has moved.
4. Place the key in the default position & remove.
5. Turn the handle downward.
6. Push the emergency key hole cover to close.