EPIC ES-7000K Digital Door Lock User Manual

PIN NUMBER

The default PIN number is 1234. Please change to a new PIN number. Ensure not to use consecutive or repetitive numbers for your safety.

User RFID Card Registration (all-at-once)

1. Open battery cover, press [Registration] button; a beep sound will be heard.
2. Enter PIN number followed by the [ # ] button.
3. Check if the numbers [ 1, 2, 4, 5 ] are lighted on the number pad. Press [ 2 ] button.
4. Place the card to be registered on the card reader. When the card has been successfully registered, the designated 3-digit card number location will be displayed on the number pad.
5. The numbers LED lights up once in the order of [2] [1,2] [4,6] [7,9] [8]; it is now in additional card registration status. If you want to add more cards, repeat steps (4) → (5). If you no longer have a card to register, press the [Registration] button.

User RFID Card Registration (one-by-one)

1. Open battery cover, press [Registration] button; a beep sound will be heard.
2. Enter PIN number followed by the [ # ] button.
3. Check if the numbers [ 1, 2, 4, 5 ] are lighted on the number pad. Press [ 2 ] button.
4. Find and select the card location number from 001-200 on the number pad, then press the [ # ] button. If the selected number is already in use, an error sound will be heard and LED [ 7 ] will be lighted on the screen.
5. The numbers [2] [1,3] [4,6] [7,9] [8] will be lighted in sequence repeatedly. It is in RFID card entry standby status. Place the card to be registered on the card reader. A beep sound will be heard, and the saved 3-digit location number will be displayed on the number pad. To register an additional card, repeat steps (5) → (6).
6. When all cards are registered, press the [Registration] button to complete.

Product Description

Product Components

Components include batteries, screws, RFID cards, mechanical keys, and a remote control set.

User Guest PIN Number Registration (1-time usage)

1. Open battery cover, press [Registration] button; a beep sound will be heard.
2. Enter PIN number followed by the [ # ] button.
3. Check if the numbers [ 1, 2, 4, 5 ] are lighted on the number pad. Press [ 4 ] button.
4. When the LED is all lighted, enter the guest PIN number to be registered. Enter a 4-digit number and press the [ # ] button.
5. Enter the guest PIN number again. Press the [Registration] button, and the registration of the guest PIN number is complete.

Note: If you register a guest PIN, it is only for 1-time usage. Only 1 guest PIN can be registered at a time.

User Remote Control Registration (all-at-once)

If the remote control receiver module is not connected, and the number [0] button does not light up, the remote control cannot be registered.

1. Open battery cover, press [Registration] button; a beep sound will be heard.
2. Enter PIN number followed by the [ # ] button.
3. Check if the numbers [ 1, 2, 4, 5 ] are lighted on the number pad. Press [ 5 ] button, and all LEDs will be lighted. It is now in stand-by mode for Remote Control Registration.
4. When the LEDs are all lighted, enter the Remote Control number on the number pad followed by the [ # ] button. You can select from 01-10 Remote Control numbers.
5. While on stand-by mode for new remote control registration, press the [Open] button of the remote control to be registered.
6. When the remote control is successfully registered, the remote control number will be displayed on the number pad. For registration of additional remote controls, repeat steps (5) → (6).
7. When all remote controls are registered, press the [Registration] button to complete the registration process.

User Remote Control Registration (one-by-one)

If the remote control receiver module is not connected, and the number [0] button does not light up, the remote control cannot be registered.

1. Open battery cover, press [Registration] button; a beep sound will be heard.
2. Enter PIN number followed by the [ # ] button.
3. Check if the numbers [ 1, 2, 4, 5 ] are lighted on the number pad. Press [ 5 ] button, and all LEDs will be lighted. It is now in stand-by mode for Remote Control Registration.
4. When the LEDs are all lighted, enter the Remote Control number on the number pad followed by the [ # ] button. You can select from 01-10 Remote Control numbers.
5. While on stand-by mode for new remote control registration, press the [Open] button of the remote control to be registered.
6. When the remote control is successfully registered, the remote control number will be displayed on the number pad. For registration of additional remote controls, repeat steps (5) → (6).
7. When all remote controls are registered, press the [Registration] button to complete the registration process.

User RFID Card Deletion (All-at-once)

1. Open battery cover, press [Registration] button for 3 seconds.
2. Number pad will turn on.
3. Enter user PIN number followed by the [ # ] button. User deletion mode is now on.
4. Check if numbers [ 2, 5, 5 ] are lighted. Press [ 2 ] button, and the number pad will light up.
5. When the number pad turns on, press the [ # ] button for 3 seconds. The melody will be heard, and all cards will be deleted.

User RFID Card Deletion (one-by-one)

1. Open battery cover, press [Registration] button for 3 seconds.
2. Number pad will turn on.
3. Enter user PIN number followed by the [ # ] button. User deletion mode is now on.
4. Check if numbers [ 2, 5, 5 ] are lighted. Press [ 2 ] button, and the number pad will light up.
5. Please enter the 3-digit card number (001-200) to be deleted. Press the [ # ] button, and the card will be deleted. To delete an additional card, repeat step 3.
6. Press the [Registration] button to finish the process.

Headbolt Auto Lock / Manual Lock

An optional feature that lets you set the lock in automatic and manual lock mode.

1. Enter the user PIN number, press [ # ] once to enter basic function setting.
2. Press the LED [ 2 ] button or LED [ 5 ] button.
3. Press the [Registration] button; setting is complete.

Sound Setting (Buzzer, Voice, Notification, Volume)

1. After entering the user PIN number, press the LED [ # ] button once to enter basic function setting mode.
2. Press the LED [ 3 ] button or the LED [ 6 ] button.
3. Press the [Registration] button to complete the setting and exit the setting mode.

Door Opening Notification ON / OFF

1. After entering the user PIN number, press the [ # ] button once to enter basic function setting mode.
2. Press the LED [ 7 ] button followed by the [Registration] button to complete the setting and exit the setting mode.

1 Minute Lock Warning Function

• 5 consecutive failed PIN number or card entries will result in a 1-minute suspension of authentication.
• After the alarm sounds for 7 seconds, operation stops for 1 minute.
• During the 1-minute lock operation, an error sound occurs when authentication is attempted.
• During the 1-minute lock operation, Card and Remote control operations will not work.
• Pressing the [Open / Close] button will cancel the alarm.
• The alarm can be released with the internal handle.

Eliguette Setting

Press the [ # ] button.

Silent Mode (10 min)

• For one-time PIN, card, or authentication, it will be silent regardless of [buzzer & alert & notification volume setting].
• In the case of PIN authentication, there is a maximum of 5 correct re-entry attempts.
• However, a warning sound will occur after 5 successive authentication failures.

Low Battery Warning Function

• When low battery is detected, the [Battery Replacement] LED lights up.
• When low battery is detected, a notification melody will be heard.
• Low voltage detected at 4.5V.
• When the voltage returns to 5.5V, the alarm is released.

Dual-Mode Security Authentication ON / OFF

1. After entering the user PIN, press the LED [ 8 ] button twice. Basic Features setting is ON.
2. Press LED [ 2 ] button, or press LED [ 5 ] button followed by [Registration] button, and setting is complete.

Settings:

• LED [ 2 ]: Dual-mode security authentication ON
• LED [ 5 ]: Dual-mode security authentication OFF

The remote control, guest PIN number, and Bluetooth can open the deadbolt lock without secondary authentication. When secondary authentication is set to be detected, the deadbolt lock is released only by the user's primary authentication (PIN). If the user's secondary authentication is not registered, dual-mode security authentication will not be entered. Instead, the user PIN will be entered. To delete security authentication or turn OFF secondary authentication, the registered user must delete all registered secondary authentications. If all are deleted, dual-mode security authentication will be OFF.

Random Number Feature

• Up to 20 digits can be entered, including the original PIN number.
• The PIN number must be entered after the random number.

Automatic Card Recognition / Manual Recognition

1. Enter the user PIN number, press [ # ] once to enter basic feature setting.
2. Press [ 1 ] button or [ # ] button.
3. Press [Registration] button, and setting is complete.

User Registration Reset

1. Open battery cover, press registration button for 3 seconds.
2. Number pad will light up.
3. Enter user PIN number followed by the [ # ] button. User deletion mode is on.
4. Check if numbers [ 2, 5, 5 ] are lighted.
5. Press [ 0 ] button, and the number pad will light off.
6. Press the [Open / Close] button inside.

FCC Compliance Information

Rule Part 15.19(a)(3): This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Rule Part 15.21: The user's manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.