YITAHOME 10x10 FT Hardtop Gazebo Assembly Instructions

Important Warnings

• For stability, always use ground nails, ropes, and expansion screws appropriate for your installation surface. Failure to do so can lead to devastating injuries and property damage from a collapsing gazebo.
• Do not use this gazebo in high winds (exceeding 25 mph), heavy snow, or inclement weather. It is not designed to withstand strong gusts or heavy snow accumulation. Clear snow when it accumulates more than 2 inches.
• Before use, thoroughly inspect the gazebo to ensure all bolts, nuts, and buckles are completely tightened and securely fastened.
• Warranty does not cover damages, losses, or injuries resulting from improper installation, misuse, failure to use stability accessories, lack of snow cleaning, or failure to take precautionary measures.
• Two or more people are required for assembly. A ladder and electric drill may be necessary.
• Do not erect the structure in heavy winds or inclement weather.
• Do not leave this unit up for extended periods as it is not a permanent structure and is not designed to withstand sustained wind or rain. It is a temporary shelter for protection from sunlight and rain. The screens also block flying insects.
• Do not use candles, matches, or open flames near the tent.
• To better align screws for practical situations, do not fully tighten screws initially.
• Professional installation is highly recommended.

Parts List

Assembly Steps

1. Attach Base Plate (J) to Pole (A) using 4x Screw (3). Repeat for all four poles.
2. Connect Horizontal Beams (B) and (B1) to Poles (A) using Connector Plates (P) and Screws (1). Ensure the 3 holes on Part P face upwards.
3. Assemble the main frame by connecting Poles (A) with Horizontal Beams (B, B1) using Screws (7).
4. Attach Support Braces (H1, H2) to the frame using Screws (3).
5. Install Roof Supports (E) and (E1) using Screws (4) and (K, K1).
6. Connect the central roof hub (L) to the top of the structure.
7. Attach Roof Panels (E, E1) to the roof supports.
8. Attach Roof Panels (G1, G2) to the frame.
9. Install Roof Panels (G5) and Fasteners (N).
10. Attach Roof Panels (Q1, Q2, Q3, Q4) to the roof structure.
11. Attach Roof Panels (S1, S2) to the roof structure.
12. Install Corner Connectors (D1, D2) and Roof Connectors (N3, N4) using Screws (1).
13. Attach Roof Panels (F1, F2) to the frame.
14. Attach Curtains (T, T1) using Hooks (U). Ensure correct placement on Part B and B1.
15. Secure the ceiling structure with Screws (Y) and (2). Follow notes for proper installation.
16. Attach remaining Roof Panels (G1, G2) and Connectors (N, N1) using Screws (1).
17. Attach the final set of curtains (T) using Hooks (U).
18. Secure the gazebo base using Expansion Screws (8) for cement surfaces or Ground Nails (9) for grassy surfaces. Ensure proper installation for wind resistance.
19. Installation Completed.

Contact Information

For any questions regarding the installation of YITAHOME products, please contact YITAHOME customer service:

Phone: +1 (888) 717-8084 (Mon-Fri 8:00 AM-4:30 PM PST / Sat. 8:00 AM-12:00 PM PST)

Email: after-sale.cs@hotmail.com

For Amazon.com orders, log into your Amazon account, go to "Your Orders", find the purchase, and click on "Contact Seller".