Domus Line GIRO-230 Remote Control System
GIRO-230 F: One-Channel Remote Control
| Code | F0266000035 |
|---|---|
| Finish | Black |
The GIRO-230 F is a single-channel remote control designed for operating power supplies for single-colour 12VDC or 24VDC LED luminaires. It is powered by a 3V CR2032 battery and includes a wall-mount bracket.
The remote features simple ON and OFF buttons. A single press activates the switch-on or switch-off of all paired receiver units.
Visual representation: A small, circular remote control device.
GIRO-230 E: Receiver Unit
| Code | F0266000013 |
|---|---|
| Input | 220-240VAC |
| Output | 220-240VAC |
| Power | Max 600W |
| Wiring IN | 1800mm with [EU plug] |
| Wiring OUT | 500mm with [EU socket] |
The GIRO-230 E is a receiver unit that works with the GIRO-230 F remote control. It is pre-wired with a power cable and EU plug on the primary side, and a cable with an EU socket on the secondary side.
Visual representation: A compact electronic unit with input and output cables.
SET GIRO-230 FE: Receiver Unit and Remote Control
| Code | F0266000036 |
|---|---|
| Input | 220-240VAC |
| Output | 220-240VAC |
| Power | Max 600W |
| Wiring IN | 1800mm with [EU plug] |
| Wiring OUT | 500mm with [EU socket] |
This set includes a GIRO-230 E receiver unit and a GIRO-230 F remote control, pre-paired at the factory for immediate use.
Visual representation: A combination package of the remote control and receiver unit.
General Description & System Compatibility
The GIRO-230 system is designed for operating single-colour LED luminaires. The GIRO-230 F remote control communicates wirelessly with the GIRO-230 E receiver unit.
Power supply for the LED luminaires is not included and must be ordered separately.
The system is compatible with 12VDC or 24VDC LED lighting.
The system carries CE marking.
Setup Configurations
Standard Set-up
A single GIRO-230 F remote control can operate up to three (3) GIRO-230 E receiving units. For reliable operation, all units should be within approximately 10 meters in an unobstructed environment. Refer to the user manual for the pairing procedure.
Visual representation: Diagram showing one remote controlling three receiver units, with a range indicator of approximately 10 meters.
Multi Controller Set-up
A single GIRO-230 E receiving unit can be controlled by multiple (up to nine, 9) GIRO-230 F remote controls. Similar to the standard setup, all remotes should be within approximately 10 meters in an unobstructed environment. Refer to the user manual for the pairing procedure.
Visual representation: Diagram showing multiple remotes controlling one receiver unit, with a range indicator of approximately 10 meters.
Functions
Single presses of the GIRO-230 F remote control's ON or OFF buttons activate the switch-on or switch-off of all paired receiver units.
Visual representation: Hands pressing the ON and OFF buttons on the remote control.
