Casaria Vanamo Garden Table - Instructions

General Information

Thank you for choosing a Casaria product. This garden table, model Vanamo, is designed for outdoor use and is manufactured to meet high quality standards. Please read these instructions carefully before assembly and use.

Product Number: 991044

1.0 Symbols

Familiarize yourself with the following symbols used in this manual:

• ⚠️ WARNING! POTENTIAL DANGER! Observe safety and assembly instructions to avoid injury or damage.
• ? RISK OF SUFFOCATION! Keep small parts and packaging material away from children.
• ? PRODUCT MODIFICATION Do not modify the product, as this voids the warranty and may make it unsafe.
• 75% X 75% 100% These symbols indicate tightening stages for screws during assembly.

2.0 General Notes

• Assembly is recommended for 1-2 people.
• Initially, insert screws by hand and tighten them only slightly to allow for alignment.
• Fully tighten all screws only after all elements are connected. This allows for minor adjustments due to potential variations in pre-drilled holes.
• Ensure the product is fully assembled and all screws/bolts are securely tightened before use. Check regularly.
• Do not overtighten screws.
• Protect the product from sun, rain, and weather. Store in a dry, protected place when not in use. A protective cover is recommended.
• Casaria is not liable for consequential damage due to lack of maintenance.
• Place the table on a level, firm, and stable surface.
• Ensure any folding mechanisms are properly locked.
• Initial creaking noises when sitting on furniture are normal and will subside with use.
• Appropriate tools are required for assembly.
• ⚠️ Keep children away during assembly due to the risk of injury.
• ⚠️ Keep fingers and limbs away from moving parts to prevent trapping.

3.0 Intended Use

This product is designed for outdoor areas, conservatories, and similar spaces. It serves as a surface for light objects. Do not stand or sit on the table. Use only for its intended purpose. Modifications may affect safety and void the warranty.

Note: This product is intended for domestic use only, not for commercial use.

4.0 Unpacking Information

Open the carton and remove the product. Check for completeness and any damage immediately after unpacking. Later claims cannot be accepted. A slight odor may be present temporarily after unpacking.

5.0 Maintenance and Care Information

Clean the table with a cloth and warm, soapy water. Avoid solvent-based cleaners or detergents like bleach, as they can damage the product. Regular cleaning, inspection, and maintenance enhance safety and lifespan.

Wood Care Instructions

Wash oiled wooden parts with lukewarm water and a mild soap solution to remove wood dust and excess oil.

Natural hardwood products require regular oiling for maintenance. Before re-oiling, lightly sand the wood and clean as described. Then, treat according to your care product's instructions.

Damage from irregular oiling is not covered by the warranty. Surface color changes, greying, and minor cracks are normal for natural products and are not grounds for complaint. Following care instructions will ensure long-term enjoyment of your natural product.

Do not place wooden furniture directly on grass. Soil and grass moisture can lead to mold and moisture damage. Hardwood furniture should not be permanently exposed to rain. If using an oil with color pigments, pigments may wash out, potentially soiling surfaces. Casaria accepts no liability for soiled surfaces.

6.0 Technical Data

7.0 Disposal

At the end of its service life, dispose of the product's valuable raw materials properly for recycling. Consult local waste disposal companies or recycling centers if unsure.

The product and packaging are subject to recycling directives. For more information, visit: quefairedemesdechets.fr

Assembly Instructions

The following describes the assembly process using parts identified in the Parts List.

Parts List

Assembly Steps

1. Step 1: Attach crossbars (T-F, T-G) and main frame supports (T-C, T-D) to the leg frame sides (T-H, T-I, T-J) using screws (T-4, T-6).
2. Step 2: Connect the tabletop sections (T-A) to the assembled frame using leg supports (T-E) and screws (T-2).
3. Step 3: Attach the tabletop extension section (T-B) to the main frame using screw (T-6) and part (T-B).
4. Step 4: Secure the tabletop sections using connector brackets (T-10, T-11) and screws (T-1). Ensure alignment with screws (T-10).
5. Step 5: Assemble the leg structures by connecting leg frame sides (T-H, T-I, T-J) with crossbars (T-4, T-3) and screws (T-1, T-3).
6. Step 6: Attach the assembled leg structures to the underside of the table frame using central support (T-M) and screws (T-3, T-4).
7. Step 7: Attach leg braces (T-L) to the leg structures using screws (T-7).
8. Step 8: Secure the table further by attaching leg braces (T-K) to the frame and legs using screws (T-5, T-8, T-9).
9. Step 9: Extend the tabletop sections to reveal the extension mechanism.
10. Step 10: The garden table is now fully assembled.

Service Portal

For service, complaints, or technical support, please contact Casaria's trained staff. Contact information can be found on the back page of the manual.

Manufactured for/EU Responsible Person: Deuba GmbH & Co. KG, Zum Wiesenhof 84, 66663 Merzig, Germany. Email: kontakt@deuba.info

Made for: Deuba LTD, Wyatt Way, Thetford, Norfolk, IP24 1HB

Copyright by Deuba. All rights reserved.