Aqara Smart Home Starter Kit Quick Start Guide
Brand: Aqara
Introduction
Thank you for choosing the Aqara Smart Home Starter Kit. Visit aqara.com for installation videos or follow the quick start guide below. The Aqara Smart Home Starter Kit is a smart home system with the hub as its control center. It includes a motion sensor, a door and window sensor, a wireless mini switch, a smart plug, and a hub. It enables functions such as pushing alert notifications, turning on the light automatically when motion is detected at night, and controlling the smart plug remotely with the tap of the wireless switch. Simply set up automations in the app and more interesting scenes can be achieved.
Kit Components
- 1. Aqara Hub: A bridge that supports Apple HomeKit and a smart home control center.
- 2. Motion Sensor: Detects human movement with passive infrared.
- 3. Door and Window Sensor: Monitors the status of doors or windows.
- 4. Wireless Mini Switch: A new type of remote switch with low-power consumption that supports single press, double press, or long press options.
- 5. Smart Plug: Schedules appliances to turn on or off and can be controlled remotely.
Quick Setup
1. Download App: Search for "Aqara Home" in the App Store/Google Play, or scan the QR code below to download and install the Aqara Home app. (Note: Aqara accessories can also be connected to Mi Home app).
2. Add Hub:
- Connect the Hub to power supply. Wait for 30 seconds until the yellow indicator light blinks quickly. Ensure your phone is connected to a 2.4GHz Wi-Fi network.
- Open the Aqara Home app, go to the "Accessories" page, and tap "+" in the top right corner.
- iOS Users: Select "Aqara Hub". Follow on-screen instructions to scan or manually enter the HomeKit Setup Code to add the Hub. It will automatically sync to the Apple Home app.
- Android Users: Search "Aqara Hub" and follow the instructions to add the Hub.
- If connection fails, press the button on the Hub for 10 seconds until the yellow light blinks quickly to reconnect.
- For further assistance, go to "Profile" > "Help and Feedback" in the app, or visit www.aqara.com.
3. Kit Setup: The kit is set up successfully after the Hub is added. Accessories in the same kit will be added automatically. *If using a dual-band router, please disable the 5GHz Wi-Fi network.
Aqara Hub Details
Button Functions
- Single Press: Turn on/off night light.
- Triple Press: Add accessories.
- Long Press (10 seconds): Reset the Hub.
Indicator Light Description
| Indicator Light Status | Status Description |
|---|---|
| Yellow light blinks quickly | Appears when connecting the Hub for the first time or when resetting the Hub. |
| Yellow light blinks slowly | Firmware update. |
| Blue light blinks quickly | Appears when Wi-Fi is connecting, the network is disconnected, or the Hub reconnects after being re-plugged. |
| Purple light blinks slowly | Allow to add accessories. |
| Red light blinks quickly | Alarm has been triggered. |
Smart Plug Details
Button Functions
- Short Press Once: Turn on/off.
- Long Press (5s): Reset.
- Quick Press 5 Times: Effective Range Test.
Indicator Light Description
| Indicator Light Status | Status Description |
|---|---|
| Blue light blinks quickly | Zigbee network is connecting. |
| Blue light keeps on | Zigbee network works properly. |
| Red light blinks quickly | Overload and high temperature alarm. |
| Red light blinks slowly | Zigbee network is not connected. |
Wireless Mini Switch Details
Button Functions
- Reset Button: Long Press (3s) to reset.
- Single Press: Effective Range Test.
Installation
Effective Range Test: Single press the reset button on the accessory at your desired position. If the Hub makes voice prompts, it indicates that the accessory can communicate effectively with the Hub.
- Option 1: Place it directly in the desired position.
- Option 2: Remove the protective film (the round sticker is in the box), and stick it to the desired position.
Motion Sensor Details
Components
- Indicator Light/ Fresnel Lens
- Reset Button: Long Press (3s) to reset.
- Single Press: Effective Range Test.
Installation
Effective Range Test: Single press the reset button on the accessory at your desired position. If the Hub makes voice prompts, it indicates that the accessory can communicate effectively with the Hub.
- Option 1: Place the Motion Sensor where you need it.
- Option 2: Remove the protective film, and stick it to the desired position.
- Option 3: Stick the Motion Sensor to the stand, and stick the stand to where you need it.
Diagram Description: The detection area is illustrated with side and top views. The recommended installation height is 1.2 to 2.1 meters (4 ft to 6 ft 8 in). If the height is below 1.2 m, the detection area decreases; if above 2.1 m, there might be blind spots. The detection range extends up to 7 meters (23 ft) at a 170° angle. Ensure the lens is aligned with the detection area and placed close to the edge of a surface.
Note: Keep the surface clean and dry.
Door and Window Sensor Details
Components
- Indicator Light
- Sensor Unit
- Magnet
- Reset Button: Long Press (3s) to reset.
- Single Press: Effective Range Test.
Installation
Effective Range Test: Single press the reset button on the accessory at your desired position. If the Hub makes voice prompts, it indicates that the accessory can communicate effectively with the Hub.
- Remove the protective film.
- During installation, try to align the marker line of the sensor unit and the magnet.
- Stick to doors or windows. It is recommended to install the sensor unit on the unmovable surface and the magnet on the movable surface. Ensure the installation gap is less than 22 mm (0.86 in.) when doors or windows are closed.
Specifications
| Component | Model | Dimensions | Wireless Protocol | Input / Battery | Operating Temperature | Operating Humidity |
|---|---|---|---|---|---|---|
| Aqara Hub | ZHWG11LM | 80×80×41.5 mm (3.15×3.15×1.63 in.) | Wi-Fi IEEE 802.11 b/g/n 2.4GHz, Zigbee | 100-240 V AC, 50Hz/60Hz | -10°C – +40°C (14°F – 104°F) | 0 – 95% RH, no condensation |
| Smart Plug | ZNCZ12LM | 67×47×35 mm (2.64×1.85×1.38 in.) | Zigbee | 1875 W, 15 A, 100-125V AC, 60Hz | -10°C – +40°C (14°F – 104°F) | 0 – 95% RH, no condensation |
| Wireless Mini Switch | WXKG11LM | 45×45×12 mm (1.77×1.77×0.47 in.) | Zigbee | Battery: CR2032 | -10°C – +50°C (14°F – 122°F) | 0 – 95% RH, no condensation |
| Motion Sensor | RTCGQ11LM | 30×30×33 mm (1.18×1.18×1.30 in.) | Zigbee | Battery: CR2450 | -10°C – +45°C (14°F – 113°F) | 0 – 95% RH, no condensation |
| Door and Window Sensor | MCCGQ11LM | 41×22×11 mm (1.61×0.87×0.43 in.) | Zigbee | Battery: CR1632 | -10°C – +50°C (14°F – 122°F) | 0 – 95% RH, no condensation |
Legal Notice
1. Controlling this HomeKit-enabled accessory automatically and away from home requires a HomePod, an Apple TV with tvOS 11.0 or later, or an iPad with iOS 11.0 or later set up as a home hub.
2. Communication between iPhone, iPad, or iPod touch and the HomeKit-enabled Aqara Hub is secured by HomeKit technology.
3. Use of the "Works with Apple HomeKit" badge means that an electronic accessory has been designed to connect specifically to iPod touch, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Notes
- Avoid metal surfaces to maximize signal strength.
- Keep the surface clean and dry.
Manufacturer Information
Manufacturer: Lumi United Technology Co., Ltd.
Address: 8th Floor, JinQi Wisdom Valley, No.1 Tangling Road, Liuxian Ave, Taoyuan Residential District, Nanshan District, Shenzhen, China.
Online Customer Service: www.aqara.com/support
Email: support@aqara.com
Important Safety Instructions
- ⚠️Caution: Risk of electric shock. This product is not a toy and not intended for use by children. For adult use only.
- The maximum ambient temperature during use must not exceed 40°C.
- The appliance is suitable for moderate climates only.
- Ventilation must not be impaired by covering the appliance with items such as newspapers, table cloths, curtains, etc.
- Naked flame sources, such as candles, must not be placed on the appliance.
- Clean with only dry cloths or a brush.
- The main plug is used as a disconnect device and should remain readily operable. To disconnect completely, unplug from the main socket outlet.
Regulatory Information
FCC Compliance
FCC ID: 2AKIT-ZHWG11LM, 2AKIT-ZHCZ12LM, 2AKIT-WXKG11LM, 2AKIT-RTCGQ11LM, 2AKIT-MCCGQ11LM
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
IC Compliance (Canada)
IC: 22635-ZHWG11LM, 22635-ZNCZ12LM, 22635-WXKG11LM, 22635-RTCGQ11LM, 22635-MCCGQ11LM
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES003. This device complies with RSS247 of Industry Canada.
RF Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Notes for Operation
- This product is not a toy; please keep children away from the product.
- This product is for indoor use only; please do not use it in a damp environment or outdoors.
- Keep away from moisture; please do not splash water or any other liquid onto the product.
- Please do not place the product near a heat source. Do not place it in an enclosed area unless there is a normal amount of ventilation.
- Please do not attempt to carry out repairs yourself; this should only be done by authorized professionals.
- This product is only for use in enhancing enjoyment and convenience in the home. It is not for use as security equipment in the home, buildings, warehouses, or any other places. If the user violates the product instructions and notes, using the product in the security industry, the manufacturer is not liable for any risk or property damage.
