Introduction
Thank you for choosing HALO! The HALO BOLT ULTIMATE is a powerful and feature-rich device designed to safely jump start your vehicle, inflate your tires, and power your electronic devices anywhere. It provides portable power for charging phones, tablets, and other electronics, and includes a convenient floodlight and emergency light. Its compact, versatile, and simple design, along with its accessories, fit neatly into a carrying pouch, making it perfect for home or vehicle storage for everyday use or emergencies. Never be without a charge, a jump start, or with a flat tire again!
Safety Precautions
⚠️ DANGER-CAUTION: Read and understand all safety information before using this product. Failure to follow these instructions may result in electrical shock, explosion, fire, serious injuries, death, or property damage.
When used correctly, lithium-ion rechargeable batteries provide a safe and dependable source of portable power. However, misuse or abuse can lead to leakage, burns, fire, or explosion, causing personal injury or damage to other devices.
- Misusing or incorrectly connecting your HALO BOLT ULTIMATE may cause electric shock to users and damage equipment.
- Do not operate in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Remove jump start clamps from the vehicle battery after jump starting the vehicle.
- Keep your HALO BOLT ULTIMATE dry and away from moisture and corrosive materials. Do not use near water or wet areas like bathtubs, showers, bathrooms, sinks, swimming pools, or basements.
- Do not expose to moisture, water, rain, or snow.
- Keep away from heat sources, including open flames, radiators, stoves, ovens, and any other devices that produce heat.
- The lithium-ion rechargeable battery may present a risk of fire or chemical burn if mistreated. Do not expose to fire or excessive temperature. Do not expose to heat above 212°F (100°C) or incinerate.
- In the unlikely event of leakage or explosion, use sand or a chemical fire extinguisher. If contact accidentally occurs, flush with water. If liquid contacts eyes, seek medical help. Ejected liquid may cause irritation or burns.
- Your HALO BOLT ULTIMATE may become warm under extended high-power operation. Do not cover, wrap, or otherwise restrict the unit during operation.
- Do not disassemble the HALO BOLT ULTIMATE; there are no user-serviceable parts inside. Incorrect reassembly may result in shock or fire hazard.
- Do not drop or subject to strong impacts. Do not operate if the unit has received a sharp blow or has been otherwise damaged.
- Do not puncture, crush, or subject to mechanical shock.
- Only charge your HALO BOLT ULTIMATE using the specified method and charging adapter provided with the unit. Using attachments not recommended by the manufacturer may result in fire, electric shock, or injury.
- Do not use any non-HALO-branded accessories, as this may cause electric shock and damage equipment.
- Do not operate the power pack with a damaged cord or plug, or a damaged output cable.
- The HALO BOLT ULTIMATE and its accessories are not toys and should be kept away from children.
- To reduce the risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting the power pack.
- Ensure the jumper cables are fully plugged into the jump start output before attempting to jump start your vehicle.
- Do not touch the red (positive) and black (negative) jumper clamps together at any point.
- Do not insert any foreign object into the ports or openings.
- Do not clean with harsh chemicals, soaps, or detergents. Wipe the case with a soft cloth.
- When charging the internal battery, work in a well-ventilated area and do not restrict ventilation.
- Ensure charging ports are not contaminated with lint or debris. Periodically use compressed air to clear port openings.
- When using the air compressor, always check and follow the manufacturer's recommended pressure. Use caution as the air hose and connectors may get hot after extended use. The compressor is designed to automatically stop after an extended run-time or if an over-temperature protection set point is reached.
- Do not dispose of this device with household waste. Contact local authorities for collection information.
Storage Temperature: -4°F – 158°F (-20°C – 70°C)
Discharge Temperature: 14°F – 122°F (-10°C – 50°C)
Charge Temperature: 32°F – 113°F (0°C – 45°C)
Included Items
The HALO BOLT ULTIMATE package includes:
- HALO BOLT ULTIMATE unit
- Jumper Cables
- AC Wall Charging Adapter
- Car Charging Adapter
- Interchangeable Nozzle Kit
- 24 Inch Air Hose Extension
- Carry Pouch
HALO BOLT ULTIMATE Device Layout
The HALO BOLT ULTIMATE features the following components:
- 1. Jump Start Output: Port for connecting jumper cables.
- 2. Jump Start Button: Initiates the jump start sequence.
- 3. Digital Screen: Displays battery status, pressure, and other information.
- 4. Pressure Unit Button: Cycles through pressure units (PSI, BAR, etc.).
- 5. USB ON/OFF Button: Controls power to the USB ports.
- 6. USB Outputs: Standard USB ports for charging devices (5V/2.4A).
- 7. Air Compressor ON/OFF Button: Activates or deactivates the air compressor.
- 8. Pressure Settings (+/-): Adjusts target pressure for the air compressor.
- 9. Air Hose: Connects to the unit for inflation.
- 10. Floodlight/Emergency Light: Integrated LED light.
- 11. Floodlight ON/OFF Button: Controls the floodlight and emergency light functions.
- 12. AC Output: Standard AC outlet for powering devices up to 75W.
- 13. AC Power Button: Activates or deactivates the AC output.
- 14. Charging Input: Port for connecting the AC wall charger or car charger.
- 15. 24 Inch Air Hose Extension: Extends the reach of the air hose.
- 16. Jumper Cable Clamps: Red (+) and Black (-) clamps for connecting to a vehicle battery.
- 17. Wall Charging Adapter: Used to charge the HALO BOLT ULTIMATE from a wall outlet.
- 18. Tapered Air Nozzles: Various tips for inflating different items (e.g., balls, bike tires).
- 19. Inflation Needle: For inflating sports balls.
- 20. Presta Valve Adapter: For use with Presta valves on bicycle tires.
- 21. Car Charging Adapter: Used to charge the HALO BOLT ULTIMATE from a vehicle's 12V outlet.
Operating Instructions
Charging Your HALO BOLT ULTIMATE
To charge your HALO BOLT ULTIMATE, use the provided Wall Charging Adapter. Plug the AC adapter into the charging input port on the unit, and then connect it to a wall outlet. The HALO BOLT ULTIMATE will begin charging automatically. When fully charged, all five battery indicator lights will be solid green, and the digital screen will display 100% charge. This process can take up to 9 hours.
During charging, the digital screen will show the charge percentage. Once fully charged, disconnect the cable.
NOTE: The HALO BOLT ULTIMATE is designed to charge between 32°F-113°F (0-45° C). A "TEMP" indicator will appear on the digital display if charging is attempted outside this temperature range.
Jump Starting Your Vehicle
- Plug the jumper cables into the jump start output port on the HALO BOLT ULTIMATE. Ensure they are fully seated.
- Attach the jumper cable clamps to the vehicle battery: Connect the red clamp to the positive (+) terminal and the black clamp to the negative (-) terminal.
- Press the "Jump Start" button. A flashing green light indicates safety checks are in progress. Wait for a solid green light.
- Start your vehicle.
- If the vehicle fails to start after the first attempt, wait 30 seconds and repeat steps 3 and 4. If the vehicle does not start after three attempts, consult a certified mechanic.
- Disconnect the jumper cable clamps from the car battery.
NOTE: The jump start function cannot be used simultaneously with the USB or AC output, or the air compressor. Ensure these modes are off before attempting to jump start your vehicle.
NOTE: The HALO BOLT ULTIMATE is designed to allow a jump start within a safe temperature range. A "TEMP" indicator will be displayed if used outside the operating temperature range.
Using the Air Compressor
The HALO BOLT ULTIMATE comes equipped with a 24-inch Air Hose Extension and Interchangeable Air Nozzles. Simply twist on the corresponding nozzle to inflate balls, pool floaties, bike tires, and more.
- Connect the air hose to the tire or use the appropriate nozzle to connect to your inflatable device.
- Press the (+) or (-) buttons to set the desired pressure. The pressure measuring units can be changed by pressing the UNIT button.
- Once the desired pressure is set, begin inflating by pressing the Air Compressor ON/OFF button. The air compressor will shut off automatically once the pressure has been reached.
NOTE: The air compressor can be started or stopped at any point by pressing the air compressor ON/OFF button. The (+) and (-) buttons can be held down to set the desired pressure quickly.
⚠️ Caution: Always check and follow the manufacturer's recommended pressure. Use caution as the air hose and connectors may get hot after extended use. The HALO BOLT ULTIMATE compressor is designed to automatically stop after an extended run-time or if an over-temperature protection set point is reached.
Charging a Laptop (Via the AC Output Port)
1. Connect the AC power plug from your laptop (or other electronic device rated at 75 watts or less) into the AC output port of the HALO BOLT ULTIMATE charger.
NOTE: Any electronic device can be powered by the AC output port as long as it is rated at 75 watts or less. BE SURE TO CHECK THAT YOUR LAPTOP OR OTHER ELECTRONIC DEVICE IS RATED AT 75 WATTS OR LESS.
2. Press the AC Power ON/OFF Button and wait for a solid green light.
NOTE: Make sure the AC power plug is fully plugged into the AC output port before pressing the AC Power ON/OFF Button.
NOTE: A flashing green light indicates safety checks are in progress.
If a flashing red light appears, the connected device is rated for greater than 75 watts and cannot be powered by the HALO BOLT ULTIMATE charger.
The HALO BOLT ULTIMATE charger will automatically power off after 30 minutes of inactivity. While jump starting your vehicle, you cannot charge electronic devices using the USB or AC output ports, nor can you charge the HALO BOLT ULTIMATE battery via the AC wall adapter.
Charging an Electronic Device Using 5V/2.4A USB Output Port
- Use the charging cable provided with your electronic device and connect the Standard USB end into either one of the HALO BOLT ULTIMATE USB 5V/2.4A Output ports.
- Turn on the USB charging by pressing the USB Power ON/OFF Button on the HALO BOLT ULTIMATE.
NOTE: The HALO BOLT ULTIMATE USB charging feature will automatically power off after 30 minutes of inactivity.
HALO SMART CHARGE TECHNOLOGY
Your HALO BOLT ULTIMATE contains the HALO SMART CHARGE TECHNOLOGY to achieve higher compatibility for charging standard 5V USB electronic devices. This technology allows the HALO BOLT ULTIMATE to communicate with your electronic device and provide the fastest and safest charge for that device.
Compatibility
Standard 5V USB electronic devices include: Mobile Phones, Tablets, PSP, NDS, MP3, MP4, MP5, Bluetooth, GPS, Cameras, and more.
Using Your HALO BOLT ULTIMATE Floodlight
The floodlight can be turned on and off by simply pressing and releasing the floodlight ON/OFF button. The first press turns on the floodlight. The second press turns on the red emergency light. The third press will turn on the SOS flashing red light. The floodlight will automatically turn off after 2 hours of inactivity.
⚠️ NOTE: Do not look directly into the LED floodlight.
Troubleshooting
Jump Start Troubleshooting Tips
| CONDITION | POTENTIAL CAUSE | SOLUTION |
|---|---|---|
| HALO BOLT ULTIMATE Jump Start button has been pressed but nothing happens | The USB ON/OFF Button or the Air Compressor ON/OFF Button has been pressed. | The jump start output cannot be used in conjunction with the USB output or air compressor modes. Ensure that both USB and AIR Compressor modes are off. |
| ? HALO BOLT ULTIMATE displays a red "BATT TOO LOW" message | The HALO BOLT ULTIMATE is not sufficiently charged to jump start the vehicle. | Recharge the HALO BOLT ULTIMATE and verify at least 50% charged. Then try the jump start process again. |
| ⚠️ HALO BOLT ULTIMATE Jump Start button flashes red and a "SAFETY CHECK FAIL" message is displayed | The jumper cables have not been properly connected to the vehicle battery. | Check the jumper cables and ensure that the red clamp is connected to the positive terminal (+) and the black clamp is connected to the negative terminal (-). |
| ⚠️ HALO BOLT ULTIMATE Jump Start button flashes green continuously | The HALO BOLT ULTIMATE is waiting to be connected to a battery or a SAFETY CHECK FAIL has been triggered. | Check the jumper cables and ensure they are properly connected to the battery. Check and ensure the vehicle battery voltage is greater than 2.0V. If the SAFETY CHECK FAIL indicator is triggered during the jump start process, it is recommended that you consult with a certified mechanic. |
| ? HALO BOLT ULTIMATE displays a blue or red "TEMP" indicator | The HALO BOLT ULTIMATE has detected a low or high temperature condition. | Disconnect the HALO BOLT ULTIMATE and allow the unit to acclimate to the temperature operating range (14°F-122°F / -10°C-50°C). |
| You cannot successfully jump start your vehicle. The HALO BOLT ULTIMATE displays a vehicle battery voltage greater than 12.0V | The HALO BOLT ULTIMATE detects that it is connected to a vehicle battery with a normal starting voltage. This could indicate that another vehicle component is faulty. | It is recommended that you consult with a certified mechanic. |
| HALO BOLT ULTIMATE Jump Start and On/Off button flashes red and blue | This could occur when attempting to jump start a vehicle while other electrical components (i.e. headlights, heater, radio, etc.) are on. The vehicle battery may be faulty. | Turn off your headlights and any other components that may drain your car battery and try the jump start process again. It is recommended that you consult with a certified mechanic. |
NOTE: If none of these troubleshooting tips work, please consult a certified mechanic for assistance.
Laptop Charging Troubleshooting Tips
| CONDITION | POTENTIAL CAUSE | SOLUTION |
|---|---|---|
| HALO BOLT ULTIMATE AC button flashes red | Electronic device is rated at greater than 75 watts. | Only electronic devices rated at 75 watts or less can be used with the HALO BOLT ULTIMATE charger. |
| The HALO BOLT ULTIMATE battery is not sufficiently charged to power the connected electronic device. | Recharge the HALO BOLT ULTIMATE battery. | |
| HALO BOLT ULTIMATE shuts off unexpectedly | The HALO BOLT ULTIMATE battery is not sufficiently charged to power the connected electronic device. | Recharge the HALO BOLT ULTIMATE battery. |
| ? HALO BOLT ULTIMATE displays a blue or red "TEMP" indicator | The HALO BOLT ULTIMATE has detected a low or high temperature condition. | Disconnect the HALO BOLT ULTIMATE and allow the unit to acclimate to the temperature operating range (14°F-122°F / -10°C-50°C). |
Specifications
HALO BOLT ULTIMATE
- Battery Cells: 3x Li-Polymer 5000mAh
- Battery Pack Energy: 55500 mWh
- Input: 14V/0.85A
- Jump Start: 12V/600Amps
- Air Compressor: 120PSI max
- USB Output: 2x USB 5V/2.4A
- AC Output (nominal): 115VAC/60Hz
- Rated Power: 75W
- Dimensions: 10 x 4.06 x 1.93 inches
- Weight: 2.8 lbs
- Operating Temperature: 32°F - 113°F (0°C - 45°C)
Compliance and Warranty
Compliance with FCC Regulation
This device complies with part 15 of the FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be used with certified peripherals and shielded cables. All peripherals must be shielded and grounded. Operation with non-certified peripherals or non-shielded cables may result in interference to radio or reception.
Limited Warranty
At HALO, we are dedicated to making the best quality products. To back this up, this product is warranted. HALO warrants its products to be free from defects in material and workmanship under normal use. During the first 90 days from date of purchase, HALO will repair or replace the defective product. This warranty does not affect any statutory rights that you may be entitled to. Keep a copy of your purchase receipt as proof of purchase.
For all questions about the warranty or exchange requests, please call 888-907-6274.
Contact Information
Alliance Consumer Group
700 Henrietta Creek Road
Roanoke, Texas 76262
Made in China
Visit us online: www.HALOPOWER.com
