Remember to fully charge your HALO Bolt ACDC.
Jump Starting Your Vehicle with the HALO BOLT 58830
- Plug the jumper cables into your HALO BOLT ACDC and attach jumper cable clamps to car battery.
- Red clamp on positive terminal (+)
- Black clamp on negative terminal (-)
- Press the "Jump Start" button and wait for solid green light.
- Pulsing green light indicates safety checks in progress.
- Solid green light indicates ready to start your vehicle.
- Start your vehicle.
- Disconnect jumper cable clamps from car battery.
Diagram Description: The device connects to a car battery via jumper cables. The red clamp attaches to the positive (+) terminal, and the black clamp attaches to the negative (-) terminal. An indicator light on the HALO Bolt shows status: pulsing green for safety checks, solid green for readiness to start the vehicle.
Charging Your Laptop with the HALO BOLT 58830
- Plug laptop into built-in AC Outlet.
- Press the AC button. Wait for solid green light.
Diagram Description: The HALO Bolt features a built-in AC power outlet with a maximum capacity of 115V AC / 65W MAX, suitable for charging laptops.
Charging Your Electronic Devices
- Connect compatible electronic devices to the USB ports to begin charging.
- Press the ON/OFF power button.
Diagram Description: The device includes USB ports, each rated at 5V/2.4A, for charging various electronic devices.
Using the LED Floodlight
Press the ON/OFF LED Floodlight button.
Diagram Description: The device is equipped with an integrated LED floodlight.