HALO RapidPack 10K Wireless: Operating Instructions
Thank you for choosing HALO. Your safety is important. Please read these instructions carefully and utilize proper precautions before operating this equipment.
Included Items
The following items are included with your HALO RapidPack 10K Wireless:
- HALO RapidPack 10K Wireless unit
- 20W USB Charging Adapter
- USB C-to-C Cable
Component Identification:
- 1. Power ON/OFF Button:
- Used to activate or deactivate charging functions.
- 2. Wireless Charging Pad:
- The surface for placing wireless-compatible devices.
- 3. Flip Out Phone Holder:
- A stand to prop up your phone.
- 4. USB A Output Port:
- Standard USB port for charging devices.
- 5. Battery Indicators:
- LED lights showing the remaining battery charge.
- 6. PD/QC and Wireless Indicator:
- Indicates Power Delivery/Quick Charge (Green) or Wireless output (Blue).
- 7. USB C Bi-direction Port:
- Used for charging the power bank or charging other devices.
- 8. Integrated Kickstand:
- A built-in stand to prop up the power bank.
- 9. USB C-to-C Cable:
- Cable for charging the power bank or compatible devices.
- 10. 20W USB Charging Adapter:
- Adapter for charging the power bank via USB-C.
Operating Instructions
Charging Your HALO RapidPack 10K Wireless
IMPORTANT: Before first use, fully charge the HALO RapidPack 10K Wireless. It can be charged using the USB-C bidirectional port, which allows for faster charging. The total charge time is approximately 3-4 hours.
Visual Description: A diagram shows the HALO RapidPack 10K Wireless connected via a USB-C cable to a wall adapter plugged into an electrical outlet.
Note:
- The Power Level Indicator lights will show the charge percentage while charging.
- Disconnect the charging cable when the power bank is fully charged.
Power Level Indicators
The LED indicator lights display the battery charge level:
| Indicator Lights | Amount of Charge |
|---|---|
| ● ○ ○ ○ | 0% - 24% |
| ● ● ○ ○ | 25% - 49% |
| ● ● ● ○ | 50% - 74% |
| ● ● ● ● | 75% - 100% |
*A blinking light indicates recharging. Solid lights indicate fully charged.
Power Delivery/Quick Charge and Wireless Indicator Display
The indicator lights provide status information:
- GREEN Light: Displays GREEN when Power Delivery/Quick Charge is active.
- BLUE Light: Displays BLUE when Wireless output is active.
Charging Your Personal Electronic Device
Use the appropriate charging cable that came with your HALO RapidPack 10K Wireless or the cable supplied with your electronic device to charge it. You can charge up to three devices simultaneously.
Once a device is connected, it will begin charging automatically.
Note:
- The HALO RapidPack 10K WIRELESS may be charged and discharged simultaneously.
Visual Description: Diagrams show the HALO RapidPack 10K Wireless charging a smartphone wirelessly and also connected via USB-C to a laptop.
Wireless Charging a Compatible Smartphone
- Place your wireless-compatible device on the wireless charging pad of your HALO RapidPack 10K WIRELESS.
- Press the USB/Wireless ON/OFF Button. Charging will begin.
- Check your smartphone to confirm it is charging. If not, adjust the phone's position on the charging pad.
Notes:
- Ensure there is no metal obstruction (e.g., metal phone cases, credit cards, magnets, rings) on the back of the phone or phone case, as this can prevent wireless charging. An obstruction will cause the LED to rapidly blink blue.
- Wireless charging offers convenience, but charging speed may be faster using a wired connection, depending on the mobile device.
- Wireless inductive charging naturally generates more heat than wired charging.
Wireless Charging Troubleshooting Tips
| Condition | Potential Cause | Solution |
|---|---|---|
| Smartphone does not charge when placed on the wireless charging pad. | The wireless function is not activated. | Press the USB and Wireless Charging ON/OFF Button to activate wireless charging. The display will illuminate blue when active. |
| Mobile phone is not properly aligned and centered on the wireless charging pad. | Reposition the mobile phone so it is centered on the wireless charging pad. | |
| Phone case is too thick or has obstructions (metal, magnets, rings). | Remove any obstructions from the back of the phone or the phone case. | |
| Phone is not compatible with wireless charging. | Confirm your smartphone is compatible with wireless charging. |
Watch While Charging
Your HALO RapidPack 10K WIRELESS features an integrated kickstand and fold-out phone holder. This allows you to easily watch movies or TV series on your phone while it is charging. It works with most small to mid-size smartphones.
Visual Description: A diagram shows the HALO RapidPack 10K Wireless with its kickstand deployed, holding a smartphone in an upright position.
Specifications
- Battery Capacity: 10,000mAh / 37Wh 3.7V
- USB-C Input: 5V 3A, 9V 2A, 12V 1.5A
- USB-C Output: 5V 3A, 9V 2.22A, 12V 1.67A
- USB-A Output: 4.5V 5A, 5V 3A, 5V 4.5A, 9V 2A, 12V 1.5A
- Wireless Output: Max 15W
- Max Output (Total): 22.5W
- Total Output (USB-C + USB-A): 5V 3A
- Dimensions: 5.7 x 2.8 x 0.8 inches
- Weight: 0.5 lbs
- Operating Temperature: 32°F - 113°F (0 - 45°C)
Limited Warranty
HALO is dedicated to producing high-quality products. This product is warranted to be free from defects in material and workmanship under normal use. During the first 90 days from the date of purchase, HALO will repair or replace the defective product. This warranty does not affect any statutory rights you may be entitled to. Please keep a copy of your purchase receipt as proof of purchase.
For warranty or exchange inquiries, please call 888-907-6274 or visit www.HALOPOWER.com.
Copyright © 2022 Alliance Sports Group, L.P. All rights reserved.
Alliance Consumer Group
700 Henrietta Creek Road
Roanoke, Texas 76262
Made in China
Safety Precautions / Moving and Storage Instructions
CAUTION: Read all safety information before using this product. Failure to follow these instructions may result in electrical shock, explosion, fire, serious injury, death, or property damage.
- Read all instructions before using the product.
- Misusing or incorrectly connecting the HALO RAPIDPACK 10K WIRELESS may cause electric shock or damage equipment.
- Do not operate in explosive atmospheres (e.g., near flammable liquids, gases, or dust).
- Keep the product dry and away from moisture and corrosive materials. Do not use near water or wet areas like bathtubs, showers, bathrooms, sinks, or swimming pools.
- Do not expose to moisture, water, rain, or snow.
- Keep away from heat sources, including open flames, radiators, stoves, ovens, and other heat-producing devices.
- The battery may present a risk of fire or chemical burn if mistreated. Do not expose to fire or excessive temperatures (above 176°F / 80°C) or incinerate.
- In case of leakage or explosion, use sand or a chemical fire extinguisher. If liquid contacts skin, flush with water. If liquid contacts eyes, seek medical help. Ejected battery liquid may cause irritation or burns.
- The HALO RAPIDPACK 10K WIRELESS may become warm during extended high power operation. Do not cover or restrict airflow.
- Do not disassemble the HALO RAPIDPACK 10K WIRELESS. There are no user-serviceable parts. Incorrect reassembly can lead to shock or fire hazards.
- Do not drop or subject the unit to strong impacts. Do not operate if the unit has received a sharp blow or is otherwise damaged.
- Do not puncture, crush, or subject to mechanical shock.
- This product and its accessories are not toys and should be kept away from children.
- Do not insert foreign objects into ports or openings.
- Do not clean with harsh chemicals, soaps, or detergents. Wipe the unit with a soft cloth.
- Ensure charging ports are free from lint or debris. Periodically use canned air to clear port openings.
- Batteries should be recycled or disposed of according to state and local guidelines.
Compliance with FCC Regulation
This device complies with Part 15 of the FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be used with certified peripherals and shielded cables. All peripherals must be shielded and grounded. Operation with non-certified peripherals or non-shielded cables may result in interference to radio or reception.
MODIFICATION: Any changes or modifications of this device could void the warranty.
FCC Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
