Universal Remote Control User Manual

Key Chart and Button Functions

The remote control features several key buttons for operating your devices:

• VOLUME: Controls and mutes TV volume.
• STB: Powers ON and OFF your set-top box.
• TRANSPORT: Controls DVR programming.
• VOICE: Activates voice search functionality using the microphone at the top of the remote.
• BACK: Exits the current menu and returns to the current program.
• MENU: Takes you to your content menu screen.
• GUIDE: Displays the program guide.

Manual Bluetooth Pairing Mode

Follow these steps to pair your remote via Bluetooth:

1. Press and hold Play/Pause + OK until the Feedback LED starts blinking.
2. The Feedback LED will stop blinking to confirm pairing.
3. If pairing is unsuccessful, hold OK + BACK for 3 seconds to clear any previous pairing information. The feedback LED will blink twice.
4. Repeat Steps 1 and 2.

Indicator: Blinking LED / LED clignote

Volume Lock

To lock the volume to a specific device:

1. Press and hold OK/SELECT and MUTE until the feedback LED blinks twice.
2. Press the Volume Up key. The feedback LED will blink twice.
3. Enter the corresponding device digit (STB: 0, TV: 1, Audio: 2).
4. The feedback LED will blink twice to confirm.
5. Complete.

Volume Unlock

To unlock the volume:

1. Press and hold OK/SELECT and MUTE until the feedback LED blinks twice.
2. Press the Mute key. The feedback LED will blink twice.
3. The feedback LED will display four blinks to indicate that the volume has now been unlocked.
4. Complete.

TV Brand Setup (Simple Set)

Follow these steps to set up the remote for your TV:

1. Turn on the TV that you wish to setup.
2. Find your TV brand in the Brand Set / Simple Set table below. Note the number that corresponds to your device brand.
3. Press and hold OK/SELECT and MUTE until the feedback LED blinks twice.
4. Press the OK/SELECT key once; the feedback LED blinks once.
5. Press digit key 1.
6. While pointing the remote at the TV, press and hold the number key for your brand that you noted in step 2. Release the key as soon as the device turns OFF. The LED will go OFF and will blink (ON-OFF) during every code transmitted.
7. Press the Power key on the remote control to turn your device back ON.
8. If this does not work for your device, proceed to Direct Code Entry steps.

Example Brand Set Table Snippet:

Audio Device Brand Setup (Simple Set)

Follow these steps to set up the remote for your audio device:

1. Turn on the device that you wish to setup.
2. Find your device brand in the Brand Set / Simple Set table below. Note the number that corresponds to your device brand.
3. Press and hold OK/SELECT and MUTE until the feedback LED blinks twice.
4. Press the OK/SELECT key once; the feedback LED blinks once.
5. Press digit key 2.
6. While pointing the remote at the audio device, press and hold the number key for your brand that you noted in step 2. Release the key as soon as the device turns OFF. The LED will go OFF and will blink (ON-OFF) during every code transmitted.
7. Press the Power key on the remote control to turn your device back ON.
8. If this does not work for your device, proceed to Direct Code Entry steps.

Example Brand Set Table Snippet:

Set Top Box (STB) Setup

Follow these steps to set up the remote for your STB:

1. Turn ON the TV and STB.
2. Find your STB brand in the QuickSwap table below.
3. Press and hold the OK + Action Key that corresponds to your device brand until the LED blinks once confirming the selection.
4. Press the CH^ button to see if STB changes. If it does, setup is complete.

Example QuickSwap Table Snippet:

Note: The specific Action Key and Digit would be listed in the full table.

Direct Code Entry

If the Simple Set method does not work, use Direct Code Entry.

Direct Code Entry for TVs

1. Turn ON the TV.
2. Refer to the Code List for the setup code for the brand you wish to control.
3. Press and hold OK/SELECT and MUTE until the feedback LED blinks twice.
4. Press the Power key on the remote control.
5. Enter the 5-digit device code. The feedback LED will blink twice to indicate successful programming.
6. If your TV turns off, the process is complete. If the TV does not turn off, repeat steps 2-7 using the next code in the list.

Direct Code Entry for Audio Devices

1. Turn ON the Audio Device.
2. Refer to the Code List for the setup code for the brand you wish to control.
3. Press and hold OK/SELECT and MUTE until the feedback LED blinks twice.
4. Press digit key 2.
5. Press the Power key on the remote control.
6. Enter the 4-digit device code. The feedback LED will blink twice to indicate successful programming.
7. If your Audio Device turns off, the process is complete. If the device does not turn off, repeat steps 2-7 using the next code in the list.

Code Lists

The document contains extensive code lists for programming the remote control with various brands of televisions and audio devices. These lists provide specific numerical codes for each brand to enable device control. Due to the extensive nature of these lists, only a few representative examples are provided below. For a complete list, please refer to the original document.

Example TV Brand Setup Codes:

• Samsung: 25343, 21868, 21199, 22603, 23154, ...
• LG: 11840, 14119, 12864, 13401, 14398, ...
• Sony: 20158, 21622, 20415, 20159, 21759, ...
• VIZIO: 11758, 11756, 10864, 10885
• Panasonic: 11480, 15453, 10171, 14230
• Toshiba: 11524, 13579
• RCA: 12247, 12746, 12434, 13577, 11840, ...
• ... and many other brands are listed.

Example Audio Brand Setup Codes:

• Bose: 21629, 21933, 23708, 24307, 25230, ...
• Denon: 22857, 23347, 21360, 23643, 25178, ...
• JBL: 23756, 22287, 22241, 23391, 23535, ...
• Yamaha: 22467, 20176, 23283, 21797
• Sony: 22172, 21622, 23700, 22582, 23487, ...
• LG: 23217, 22197, 22676, 22284, 25108
• Onkyo: 21805, 22503, 24041, 23984, 23992, ...
• ... and many other brands are listed.