AGM BUDS Quick Start Guide

SPECIFICATIONS

Name: true wireless bluetooth earphones

Model: AGM BUDS

Driver: 13mm

Frequency response: 20Hz~20KHz

Impedance: 32ohm

Sensitivity: 109±3db

Bluetooth version/range: V5.0/≥10m

Music/Talk time: about 5 hours/about 4 hours

Time with a charging case: 16~20 hours

CONNECT THE DEVICE

1. Please keep the distance between the Bluetooth headset and the mobile phone (or other connected device) within 1 meter, the closer the better.
2. Open the cover of the charging case, the indicator light of the charging case is on, L/R is automatically paired, and waiting to connect to the Bluetooth device.
3. Turn on the user's mobile phone Bluetooth function (or other Bluetooth device), search or scan. At this time, the mobile phone will search for nearby Bluetooth devices. Click on the searched headset name: AGM BUDS. After successful connection, you can make a phone call and listen to music.
4. If the headset is not connected for 3~5 minutes, the headset will automatically sleep and shut down.

POWER ON AND PAIRING

Boot up: When the charging compartment is opened, the headset automatically turns on and L/R is automatically paired.

Shut down: Put the earphone into the charging case and close the lid, waiting for 2~3 seconds to automatically shut down.

Voice Assistant

Android system: Press the ear bar continuously for 2~3 seconds to enter the voice assistant (L/R touch area).

IOS system: 1. Settings > Wireless and Network > Bluetooth > Settings > (change the left and right noise to SIRI). 2. Press the ear bar continuously for 2~3 seconds to call SIRI.

CALLING CONTROL

Calling answer: Press the ear bar once (L/R) on the touch area to answer the phone.

Calling hang up: Press the ear bar once (L/R) on the touch area to hang up the phone.

Incoming calling rejection: Press the ear bar twice (L/R) on the touch area to reject the phone.

PLAYING MUSIC

Play/Pause: Ear bar press 1 time (L/R) touch area.

Previous song: Press the ear bar 3 times in a row (L/R) touch area.

Next song: Press the ear bar 2 times in a row (L/R) touch area.

CHARGE THE EARPHONE

After the L/R earphone is put into the Charging case, the earphone will be charged in the charging compartment, and the light will flash for 3~4 seconds and then turn off.

Earphone Battery capacity: 30mAh

Charging case Battery capacity: 250mAh

CHARGING CASE CHARGING

Charging case rated input: 5V=1A

Charging time: About 2 hours

Charge interface: Type-c

Indicator light

Charging case button: Single press: Check the current battery level of the charging case.

Battery Level Indicators:

• 25%
• 50%
• 75%
• 100%

PRODUCT SAFETY INFORMATION

1. Do not use corrosive cleanser to clean this product.
2. Do not heat the product or nearby the fire, like a cooking stove.
3. Do not expose the product to sunlight directly for a long time.
4. To avoid explosion, do not throw the product into fire.
5. Do not try to disassemble this product for any modification, because it does not contain any repair components.
6. Do not use this product in the rain.
7. If you plan not to use this product for a long time, please keep it in a dry environment and make sure to charge it at least once a month to avoid extreme temperatures and dust.
8. The ambient temperature of the product is 0-40°C.

Manufacturer Information

Company: SHENZHEN AIJIEMO SCIENCE AND TECHNOLOGY CO., LTD

Copyright © AGM Group Limited 2021. All rights reserved.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement.