IKEA URSHULT LED Cabinet Lighting
Design and Quality by IKEA of Sweden
Important Safety Instructions
For indoor use only.
Regularly check the cord, the transformer and all other parts for damage. If any part is damaged, the product should not be used.
Important information! Keep these instructions for future use.
The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
ONLY USE A SAFETY TRANSFORMER WITH A SELV OUTPUT AS A SUPPLY FOR THE PRODUCT.
Assembly Instructions
The following components are included:
- 1x Mounting rail and cover
- Screws (quantity not specified in diagram, but shown in steps)
Step 1: Secure the power supply box to the surface using four screws. Ensure the power supply box is positioned 50mm (2 inches) from the edge as indicated.
Step 2: Attach the mounting rail to the surface using screws.
Step 3: Insert the cable into the mounting rail and secure it with the cover. A 'click' sound indicates it is properly secured.
Product Connection
The LED driver and power supply cord are sold separately. The diagram shows how to connect the LED driver, power supply cord, and the lighting unit to a power outlet.
Up to 4 units can be connected together.
Product Information
The URSHULT LED cabinet lighting system is designed for indoor use and requires a separate LED driver and power supply cord. Ensure all parts are checked for damage before use. The light source is not user-replaceable and must be handled by qualified personnel.
