TVÄRDRAG

Important Safety Instructions

For indoor use only.

Regularly check the cord, the transformer, and all other parts for damage. If any part is damaged, the product should not be used.

ℹ️ Important information! Keep these instructions for future use.

Luminaire Specifics

• The light source of this luminaire is not replaceable; when the light source reaches its end of life, the whole luminaire shall be replaced.
• The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
• ONLY USE A SAFETY TRANSFORMER WITH A SELV OUTPUT AS A SUPPLY FOR THE PRODUCT.
• Use only IKEA LED drivers suited for this product. The total wattage of the lamps connected to one LED driver must not exceed the maximum power stated on that LED driver and never more than 30W.

Installation & Usage Precautions

1. Wipe the surface dry where the tape will be used with a clean and dry cloth.
2. The assembly tape is permanent and is not intended to be removed. You might damage the surface under the lamp if you try to remove the tape.
3. Please keep the unused fittings for future use.

⚠️ CAUTION! Do not cover. Lamp gets hot, may cause fire.

⚡ WARNING – THIS IS AN ELECTRIC LAMP – NOT A TOY! TO AVOID RISK OF FIRE, BURNS, PERSONAL INJURY AND ELECTRIC SHOCK, IT SHOULD NOT BE PLAYED WITH OR PLACED WHERE SMALL CHILDREN CAN REACH IT.

Strangulation Hazard Warning

⚠️ NEVER place cord within reach of a child in a cot or playpen. ALWAYS secure cord to wall or cabinet. Check regularly that the cord is securely fastened. Pull the cord to remove any slack between fasteners. Tie up any remaining slack cord between the driver and socket.

Assembly Instructions

Parts Included:

• Mounting Plate (1x) [Part Number: 10084763]
• Screws (2x) [Part Number: 108553]

Steps:

1. Prepare Surface: Clean the surface where the mounting tape will be applied with a clean, dry cloth. Ensure the surface is dry. [ℹ️ Icon showing wiping a surface]
2. Apply Mounting Plate: Peel the backing from the assembly tape on the mounting plate (10084763). Press the plate firmly onto the prepared surface. Note: The assembly tape is permanent and not intended for removal. Attempting to remove it may damage the surface underneath. [Icon showing applying tape and pressing plate]
3. Secure Mounting Plate: Use the provided screws (108553) to secure the mounting plate to the surface. [Diagram showing screws being inserted]
4. Attach Lamp Arm: Connect the lamp arm to the mounted plate. [Diagram showing lamp arm connection]
5. Connect Power: Connect the power cable to the driver unit. [Diagram showing cable connection]
6. Manage Cable: Secure any excess cable neatly using the provided ties or by bundling it between the driver and the socket to prevent slack. [Diagram showing cable management]
7. Final Check: Ensure all connections are secure and the lamp is stable. [Diagram showing final assembly]

Note: The LED driver and power supply cord are sold separately.

Maximum Units: This system supports a maximum of 6 units per LED driver.

Product Information

Product Name: TVÄRDRAG

Brand: IKEA

Type: Cabinet Lighting

Model/Part Number: AA-2288681-5

Designed and Quality: IKEA of Sweden