Marta MT-1097 Electric Kettle User Manual

Introduction

This manual provides instructions for the safe operation, maintenance, and care of the Marta MT-1097 Electric Kettle. Please read all instructions carefully before use and keep for future reference.

The kettle is designed for household use only and is intended for heating water.

Safety Precautions

• Read all instructions before using the appliance.
• Ensure your local mains voltage matches the voltage indicated on the appliance.
• The appliance must be connected to a grounded socket.
• Do not use the kettle for heating liquids other than water.
• Do not use the appliance outdoors.
• Place the appliance on a flat, stable, and heat-resistant surface.
• Do not use the appliance if the power cord or plug is damaged.
• Keep the power cord away from hot surfaces and sharp edges.
• Do not pull the power cord to disconnect; pull the plug.
• Do not attempt to repair the appliance yourself. Contact a service center for any issues.
• Using unauthorized accessories may be dangerous or damage the appliance.
• Always unplug the appliance before cleaning and allow it to cool down.
• Do not immerse the appliance, cord, or base in water or any other liquid.
• Supervise children when using the appliance.
• Do not fill the kettle above the MAX line or below the MIN line.
• The appliance heats up during use; avoid touching hot surfaces.
• Do not open the lid during the boiling cycle.
• If the kettle boils dry, allow it to cool for 15-20 minutes before refilling.
• The kettle has a safety feature that automatically shuts off when boiling is complete.

Parts List

The kettle typically includes:

• Lid
• Housing
• On/Off Button
• Base

Before First Use

1. Remove all packaging materials and labels.
2. Fill the kettle to the MAX line with water, boil it, and discard the water. Repeat this process 2-3 times to remove any manufacturing residue.

Boiling Water

1. Remove the kettle from its base.
2. Open the lid.
3. Fill the kettle with water between the MIN and MAX lines.
4. Close the lid.
5. Place the kettle securely on the base.
6. Connect the power cord to the outlet and switch the unit ON. The indicator light will illuminate.
7. The kettle will automatically switch off when the water boils.
8. After use, unplug and empty the kettle. Ensure the kettle is switched off before removing it from the base.

Cleaning and Maintenance

• Unplug the kettle and allow it to cool before cleaning.
• Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or scouring pads.
• Regularly descale the kettle using citric acid or a lemon juice mixture. Boil the solution, let it sit, then discard and rinse.

Specifications

Warranty does not cover consumables (filters, ceramic and non-stick coating, rubber seals, etc.).

The production date can be found on the serial number sticker. The manufacturer reserves the right to change specifications without notice.

For current information about service centers, visit: http://multimarta.com/

Warranty Information

The warranty period is 2 years from the date of purchase. The warranty does not cover damage caused by improper use, accidents, or natural disasters. Please refer to the user manual for full warranty details.

Disposal

Dispose of the appliance and its packaging in accordance with local regulations for electronic waste recycling.