Marta MT-2233 / MT-2234 Lint Remover User Manual
Product Description
The Marta MT-2233 and MT-2234 are lint removers designed to efficiently remove fuzz and lint from clothing and other textile items. The device operates on a rechargeable battery and is designed for domestic use.
Product Image
A white, oval-shaped lint remover with a transparent collection container at the bottom. The Marta logo is visible on the device. The top features a protective cover and a power switch.
Contents
The manual is available in multiple languages, including Russian (RUS), English (GBR), Kazakh (KAZ), and Belarusian (BLR).
Parts List
- 1. Protective cover
- 2. Removable lint container
- 3. Protective metal grid
- 4. Blades
- 5. Housing
- 6. On/Off switch
- 7. Brush for blades cleaning
- 8. USB-connector
- 9. USB-cable
Safety Instructions
- Read the instructions carefully before operating the appliance and save for future reference.
- This appliance is intended for domestic use only.
- Do not use the appliance for industrial purposes.
- Do not use the appliance outdoors.
- Do not leave a working appliance unattended.
- Do not attempt to repair the appliance yourself. Contact a service center for any issues.
- Using non-recommended accessories may cause damage to the appliance.
- Do not use the appliance near water sources such as bathtubs, sinks, or swimming pools.
- The appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they are supervised or instructed by a person responsible for their safety. Children should be supervised to ensure they do not play with the appliance.
- Do not use this appliance on delicate fabrics.
- Do not use the unit as a shaver for body and face.
- Do not remove lint from clothing while it is being worn.
- Do not use the machine on plush fabrics, fabrics with long pile, embroidery, etc.
Instructions for Use
- Before charging, ensure the switch is OFF. Insert the USB charging plug into the lint remover and the other USB plug into the charger. The charging indicator will light up when the charger is plugged into the power outlet.
- For the first use, completely discharge and then charge the battery. The first full charge takes approximately 8 hours. The battery life with a full charge is approximately 60 minutes.
- Recharge the batteries at least once every 6 months, even if the lint remover is not in use.
- Place the clothing on a flat surface, such as an ironing board, and smooth it out.
- Remove the protective cover from the unit.
- Set the ON/OFF switch to the “ON” position and move the appliance in smooth circular motions without pressure to clean lint or fuzz.
- Note: Do not press hard on the unit to avoid damaging the fabric or the protective mesh.
- Set the ON/OFF switch to the “OFF” position to turn off the appliance.
- Remove the lint container and empty it.
Cleaning and Care
- Regularly empty the lint container.
- Carefully remove the metal mesh using a flat edge screwdriver or a coin.
- Take out the blades and clean them with the brush.
- Reinstall the blades onto the motor axis and rotate them gently and firmly.
- Replace the metal mesh and push it into place.
- Wipe the appliance body with a soft, damp cloth.
- Do not use abrasive cleaners or chemical solutions for cleaning.
- Wipe the unit dry.
Storage and Transportation
- Before storing, follow all instructions in the CLEANING AND CARE section.
- Store the appliance in a dry place.
- Storage conditions: store at positive temperatures and humidity not exceeding 80%. Shelf life is unlimited.
- Ensure the packaging is protected during transportation.
Warranty
The warranty does not cover consumable parts such as filters, ceramic and non-stick coatings, rubber seals, etc.
The production date can be found on the serial number located on the identification sticker on the gift box and/or on the device sticker. The serial number consists of 13 characters, where the 4th and 5th characters indicate the month, and the 6th and 7th characters indicate the year of production.
The manufacturer reserves the right to change the design and technical specifications of the model without prior notice. Please check at the time of receiving the product.
Manufacturer Information
- Producer: Cosmos Far View International Limited. Room 701, 16 apt, Lane 165, Rainbow North Street, Ningbo, China. Made in China.
Technical Specifications
Specification | Value |
---|---|
Power Supply | 2 x 1.2V 450mAh |
Net Weight / Gross Weight | 0.180 kg / 0.238 kg |
Package Size (L x W x H) | 90 x 90 x 86 mm |