Marta MT-1575 Hand Blender

Safety Precautions

• Read the manual carefully before use and save for future reference.
• Before first use, check that the appliance's technical specifications match your local power supply.
• For domestic use only; not intended for industrial use.
• Do not use outdoors.
• Do not leave the appliance unattended while in operation.
• Do not use with a damaged cord, plug, or other damage.
• Keep the power cord away from sharp edges and hot surfaces.
• Do not pull the cord; always grasp the plug. Do not wrap the cord around the device housing.
• Never attempt to repair the appliance yourself. Contact a service center for any issues.
• Using unrecommended accessories may damage the appliance.
• Always unplug the appliance before cleaning or when not in use.
• Do not immerse the appliance in water or other liquids to avoid electric shock or fire. If this happens, unplug immediately and contact a service center.
• This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised by a responsible person.
• Do not use for grinding hard products like coffee beans or ice cubes.
• Switch off the appliance before changing accessories.
• Be careful with sharp blades.
• Avoid contact with moving parts.
• Incorrectly assembled devices can cause fire, electric shock, or other injuries.
• Maximum continuous operating time is 30 seconds. Allow the motor to cool for 1 minute before continuing. After 4 cycles, allow the motor to cool for 15 minutes.

Before First Use

• Unpack the appliance and remove all packaging materials and labels.
• Clean the motor block with a damp cloth. Wash accessories in soapy water, rinse thoroughly, and dry.
• Never immerse the motor part in running water or water.

Using the Appliance

Speed Selection

• Press the speed mode button I to start.
• Use the speed controller to gradually increase or decrease speed.
• Choose speed mode based on the product. Start with low speed and gradually increase.
• Caution: The speed controller only operates when button I is pressed.
• To use maximum speed, press speed mode button II.

Using the Blender

• Attach the blender accessory.
• Place the accessory in the cup with the product, hold the handle firmly.
• Connect the device to the mains and select the proper speed.
• Move the blender in a circular motion for proper grinding.
• Do not allow liquid to reach the device handle.
• If cutting blades get blocked, turn off and unplug the appliance.
• After use, turn off the device, remove the blender from the mains, and disconnect the accessory.

Using the Whisk

• Attach the handle to the upper part of the whisk.
• Place the product in the cup.
• Connect the device to the mains and select the desired power and speed.
• After use, turn off the device, remove the blender from the mains, and disconnect the whisk.

Cleaning and Maintenance

• Before cleaning, always unplug the appliance.
• Clean the motor block with a damp cloth. Do not immerse the appliance in water or other liquids.
• Wash accessories in soapy water and dry.
• Do not use chemical or abrasive cleaners.
• It is recommended to clean the device immediately after use to avoid staining plastic parts.

Technical Specifications

Warranty Information

Warranty does not cover consumable materials (filters, ceramic and non-stick coatings, rubber seals, etc.).

The production date can be found in the serial number on the identification sticker on the gift box and/or on the device itself. The serial number consists of 13 characters; the 4th and 5th characters indicate the month, and the 6th and 7th indicate the year of production.

The manufacturer reserves the right to change the complete set, appearance, country of manufacture, warranty, and technical characteristics of the model without prior notice. Please check at the time of purchase. Current information about service centers is available on the website http://multimarta.com/