Westfalia LED Plant Grow Light 80W

Introduction

This manual provides essential information for the proper use of your new product. It helps you utilize all functions, avoid misunderstandings, and prevent damage. Please read this manual carefully and keep it for future reference.

Intended Use

The LED plant grow light is designed to support plant growth and is not suitable for general room illumination.

Safety Notes

• ⚠️ IMPORTANT: Please read this manual carefully and use the device only as instructed.
• Dispose of packaging material carefully or store it out of reach of children. There is a danger of suffocation! [choking hazard symbol]
• Persons with limited physical, sensory, or mental abilities should only use the device if supervised and instructed by a qualified person.
• This item is not a toy. Do not allow children to play with the lamps.
• Do not expose the product to extreme temperatures, strong vibrations, or severe mechanical stress.
• Do not stare directly into the LEDs or point the light beam directly at people or animals. Do not use devices that strongly focus light for viewing the beam.
• If the unit is damaged, discontinue use and have it repaired by a professional or contact customer service. Do not disassemble the unit or attempt self-repair.

Operation and Maintenance

Assembly and Setup

Hang the LED plant grow light in a suitable position. The light should reach the plants from directly above to prevent them from growing unevenly. Connect the power plug to a suitable wall socket. Use the on/off switch on the back of the lamp to turn it on and off.

Cleaning

• Wipe the housing with a lightly moistened cloth. Use mild detergent if necessary. Do not immerse the light in any liquids.
• Do not use aggressive chemicals or abrasive cleaners to avoid damaging the surfaces.

Technical Data

Light Spectrum

The device emits a light spectrum optimized for plant growth, featuring peaks in the blue (approx. 460-470 nm) and red/far-red (approx. 620-735 nm) regions. The graph indicates a peak intensity of 1.0 = 1.947e+002mW/nm.

EU Declaration of Conformity

This product complies with essential requirements of European Directives, including RoHS (Restriction of hazardous substances), EMC (Electromagnetic Compatibility), and LVD (Low Voltage Directive). Specific standards include EN 55015:2019+A11, EN 61547:2009, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 60598-1:2015+AC+A1, EN 60598-2-1:1989, and EN 62493:2010.

Customer Service and Disposal

For customer service and inquiries, please refer to the contact details provided by Westfalia. Please help protect the environment by recycling this product at an authorized electronic waste collection point.