Westfalia Solar Bollard Lamps, Set of 2

Introduction

Welcome to your new Westfalia Solar Bollard Lamps. This manual provides essential information for the safe and effective use of your product.

Safety Instructions ⚠️

• Read this manual carefully and use the device only as instructed.
• Dispose of packaging material safely, out of reach of children, as it poses a choking hazard.
• Persons with limited physical, sensory, or mental abilities should only use the device under supervision by a qualified person.
• This product is not a toy. Keep children away from the solar lamps.
• Do not use these solar lamps as the sole light source for pathways in dark or complex areas. Consider installing a separate, brighter light source controlled by a twilight switch and motion sensor.
• Protect the product from extreme temperatures, strong vibrations, and mechanical stress.
• Do not disassemble, burn, or short-circuit rechargeable batteries.
• Avoid staring directly into the LEDs or directing the light beam at people or animals.
• If the unit is damaged, discontinue use and contact customer service for professional repair. Do not attempt self-repair.
• Battery Disposal: Batteries do not belong in household waste. Please check with your local council for proper battery disposal and recycling facilities. ♻️ ?️❌

Operation

Intended Use

The product is designed as a decorative solar lamp for gardens or terraces. The integrated solar panel charges the internal battery during daylight. The lamp automatically turns on at dusk and off at dawn, powered by the rechargeable battery.

This solar lamp is intended for domestic use only and is not suitable for commercial applications.

Assembly and Setup

• Assemble the lamps as shown in the product illustration.
• The solar lamp is weather-protected against moisture but should not be directly exposed to heavy rain or submerged in water.
• If a protective transport foil is present on the solar panel, remove it before use.

Using the Solar Lamp

• Lamp head detachment: Turn the lamp head counter-clockwise to detach it.
• Switch: Locate the slide switch under the lamp head, marked "ON" and "OFF". Set to "ON" for operation and charging. The lamp lights up white in the "ON" position.
• Performance: The lamp's performance varies with the season and the intensity/duration of sunlight.
• Battery Charging: In periods of insufficient sunshine, the battery may not fully charge, reducing illumination time. Avoid deep discharge, which can damage the battery.
• Maintenance: Keep the solar panel clean and free from dirt, snow, or ice, especially in winter, as this affects performance. Cold temperatures can reduce battery life. If storing for extended periods (e.g., winter), clean the lamp and store it in a warm, dry place.

Maintenance

Replacing the Battery

The battery is not designed for customer replacement. Please contact a professional for battery service.

Cleaning

• Wipe the lamp housing with a lightly moistened cloth. Mild detergent can be used if necessary.
• Do not immerse the solar lamp in any liquids.
• Avoid using aggressive chemicals or abrasive cleaners to prevent surface damage.

Technical Specifications

Customer Services & Disposal

Customer Support

For support, please contact Westfalia in Germany, Austria, or Switzerland:

• Germany: Werkzeugstraße 1, D-58093 Hagen. Tel: (0180) 5 30 31 32. Fax: (0180) 5 30 31 30. Internet: www.westfalia.de
• Austria: Moosham 31, A-4943 Geinberg OÖ. Tel: (07723) 4 27 59 54. Fax: (07723) 4 27 59 23. Internet: www.westfalia-versand.at
• Switzerland: Wydenhof 3a, CH-3422 Kirchberg (BE). Tel: (034) 4 13 80 00. Fax: (034) 4 13 80 01. Internet: www.westfalia-versand.ch

Disposal

Please help avoid waste. Many components of this article are made from valuable, recyclable materials. Do not dispose of this item in your household trash bin. Instead, take it to your local collection point for electrical and electronic waste. ♻️ ?️❌

EU Declaration of Conformity

Westfalia Werkzeugcompany declares that this product, Solar Bollard Lamps, Set of 2 (Article No. 95 14 20), conforms to the essential requirements of European Directives, including RoHS (2011/65/EU) and EMC (2014/30/EU).

Technical documentation is available at the QA department of Westfalia Werkzeugcompany.

Hagen, 2nd of November, 2021

Thomas Klingbeil, Quality Assurance / QA Representative