Mi Door and Window Sensor 2 User Manual

Product Overview

The Mi Door and Window Sensor 2 is designed for installation on doors, windows, drawers, and similar openings. It detects the proximity and separation of the sensor and its paired magnet. This allows for real-time monitoring of whether doors or windows are open or closed. Additionally, an integrated light sensor measures the ambient light intensity of the surrounding environment.

Key features include low power consumption, tool-free installation, and readiness for immediate use.

Note: This product is intended for indoor use only and requires connection to a Bluetooth gateway for smart control capabilities.

Components:

• 1. Induction Lens: Contains a built-in status indicator and light sensor.
• 2. Reset Button: Press briefly to wake up the Bluetooth connection. Press and hold for 3 seconds to reset or confirm adding the device.
• 3. Insulating Sheet: This sheet should be torn off before use to activate the sensor.

Connecting with Mi Home/Xiaomi Home App

This product is compatible with the Mi Home/Xiaomi Home app. Use the app to control your device and integrate it with other smart home devices.

To download and install the app, search for "Mi Home/Xiaomi Home" in your device's app store. If the app is already installed, scanning the QR code (QR codes are excluded from this document) will direct you to the connection setup page.

* The app is referred to as Xiaomi Home app in Europe (except Russia). The name displayed on your device should be considered the default.

Adding a Device

1. Open the Mi Home/Xiaomi Home app and sign in to your account.
2. Tap the '+' icon in the top right corner of the homepage to enter the Add device page.
3. On the Add device page, tap the scan icon (typically in the top right corner) and follow the on-screen instructions to complete adding the device and begin using it.

Note: If the product's QR code cannot be scanned, you can search for the product name "Mi Door and Window Sensor 2" within the app to complete the adding process. If the device cannot be added, try again by holding your phone as close to the sensor as possible.

Please install and secure the device once it has been successfully added.

Illustration: A hand is shown pressing and holding the reset button on the sensor. The text indicates that this action should continue until the indicator continuously blinks 3 times, at which point the button should be released.

Note: App versions may be updated. Please follow instructions based on the current app version.

Smart Scenes

This product can be used to create smart scenes through the Mi Home/Xiaomi Home app, enabling connections with other smart devices.

Example of a smart scene:

When a door is opened at night, the door and window sensor triggers, and the living room light turns on automatically.

Diagram Description: The diagram illustrates the Mi Door and Window Sensor 2 detecting a door opening event. This event is represented by an arrow pointing towards a light bulb icon, signifying that "The living room light turns on automatically."

When a window is opened to ventilate a room, the door and window sensor triggers, and the air purifier automatically turns off.

Diagram Description: The diagram illustrates the Mi Door and Window Sensor 2 detecting a window opening event. This event is represented by an arrow pointing towards an air purifier icon, signifying that "The air purifier turns off automatically."

For additional connection functions, tap the '+' icon on the homepage in the Mi Home/Xiaomi Home app. Select the device as a trigger condition to create smart connection scenes tailored to your specific scenarios.

Installation

1. Apply the adhesive stickers to the inside bottom grooves of the sensor and the magnet, respectively. Tear off the protective film from the adhesive stickers before installation.
2. Align the marks on the side of the sensor unit and the side of the magnet as closely as possible during installation.
3. Attach the sensor to the fixed side and the magnet to the movable side of the area that opens and closes (e.g., door frame and door). It is recommended to install the sensor on the fixed surface and the magnet on the movable surface. Ensure the clearance between the two components is less than 18 mm when the door or window is closed.

Diagram Description: The diagram shows the sensor and magnet aligned, with a measurement line indicating that the clearance between them should be less than 18 mm when the door or window is closed.

Note: The surface to which the adhesive sticker is applied must be clean and dry. Please avoid dropping the sensor during installation, as this may easily damage its body. The installation clearance can be measured using a scale, if available on the back of the user manual.

Battery Replacement

1. Place your thumb in the groove of the sensor's body and lift the body upward to separate it from the back cover.
2. Insert a pin or a similar tool into the designated hole and lift the battery upward to remove it.
3. Place the CR2032 battery into the battery slot, ensuring the positive terminal (+) faces upwards.
4. Align the sensor body with the back cover and firmly press it to snap it securely into place.

Diagram Description: The diagram illustrates the process of battery replacement. It shows separating the sensor body from the back cover, inserting a tool into a hole to pry out the battery, and placing the new CR2032 battery into the compartment with the positive terminal facing up.

Specifications

Warranty Notice

As a Xiaomi consumer, you benefit from certain additional warranty conditions. Xiaomi provides specific consumer warranty benefits that supplement, not replace, any legal warranties mandated by your national consumer law. The duration and conditions of legal warranties are governed by respective local laws.

For more information on consumer warranty benefits, please refer to Xiaomi's official website: https://www.mi.com/en/service/warranty/.

Except where prohibited by law or otherwise promised by Xiaomi, after-sales services are limited to the country or region of original purchase. Under the consumer warranty, to the fullest extent permitted by law, Xiaomi may, at its discretion, repair, replace, or refund your product.

Warranties do not cover normal wear and tear, force majeure events, abuse, or damage caused by user negligence or fault.

The contact person for after-sale service can be any individual within Xiaomi's authorized service network, Xiaomi's authorized distributors, or the final vendor who sold the products. If you are in doubt, please contact the relevant person identified by Xiaomi.

The present warranties do not apply in Hong Kong and Taiwan.

Products that were not duly imported, manufactured by Xiaomi, or acquired from Xiaomi or a Xiaomi official seller are not covered by these warranties. As per applicable law, you may benefit from warranties provided by the non-official retailer who sold the product. Therefore, Xiaomi advises you to contact the retailer from whom you purchased the product.

Regulatory Compliance Information

WEEE Information

Symbol Description: A symbol indicating waste electrical and electronic equipment (WEEE, as per directive 2012/19/EU).

All products bearing this symbol are classified as waste electrical and electronic equipment and should not be mixed with unsorted household waste. To protect human health and the environment, you should hand over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location and terms and conditions of such collection points.

EU Declaration of Conformity

CE Marking: Indicates compliance with relevant EU directives.

Hereby, Tianjin Hualai Technology Co., Ltd. declares that the radio equipment type [MCCGQ02HL] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: http://www.mi.com/global/service/support/declaration.html

UK Declaration of Conformity

UKCA Marking: Indicates compliance with relevant UK regulations.

Hereby, Tianjin Hualai Technology Co., Ltd. declares that the radio equipment type [MCCGQ02HL] is in compliance with Radio Equipment Regulations 2017. The full text of the UK declaration of conformity is available at: https://www.mi.com/uk/service/support/declaration.html

FCC Compliance

FC Marking: Indicates compliance with FCC regulations.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

To satisfy FCC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance are not recommended.

Battery Safety Warnings

• Do not replace a battery with an incorrect type.
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion.
• Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.

CAUTION: Risk of explosion if the battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions.

Do not ingest battery. Chemical Burn Hazard.

This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.

Keep new and used batteries away from children.

If the battery compartment does not close securely, stop using the product and keep it away from children.

If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Manufacturing Information

Manufactured for: Xiaomi Communications Co., Ltd.

Manufactured by: Tianjin Hualai Technology Co., Ltd. (a Mi Ecosystem company)

Address: 8/F, Huaqiao Chuangye Building, No.10 Jinping Road, Ya'an Road, Nankai District, Tianjin, China.

For further information, please go to www.mi.com

User Manual Version: V1.0