Manuals+

Vollrath Breath Guard Installation Instructions

One Piece and Three Piece Cafeteria Breath Guards

These instructions cover the installation of both the one-piece and the three-piece Cafeteria Breath Guard.

One Piece Breath Guard Installation

Some units are shipped with a breath guard not installed. To install the breath guard, follow these steps:

NOTE: Use caution when tightening the cap nuts. Overtightening may cause the plastic to crack.

  1. Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown in Figure 1. Repeat for all four uprights.
  2. Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
  3. Install the one-piece breath guard (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all four mounting locations.
  4. Install the side breath protector (G) to the support tube (D) securing with cap nuts (C) as shown. Repeat on the other side.

Figure 1: One Piece Breath Guard Installation Diagram Description: This diagram illustrates the assembly of the one-piece breath guard. It shows uprights (A) being attached to studs (B) using cap nuts (C). The support tube (D) connects between the uprights (A) with cap nuts (C). The main breath guard component (E) is secured to mounting locations using screws (F) and cap nuts (C). The side breath protector (G) is shown attached to the support tube (D) with cap nuts (C).

Three Piece Breath Guard Installation

Some units are shipped with a breath guard not installed. To install the breath guard, follow these steps:

NOTE: Use caution when tightening the cap nuts. Overtightening may cause the plastic to crack.

  1. Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown in Figures 1 and 2. Repeat for all four uprights.
  2. Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
  3. Install the side breath guards (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all mounting locations.
  4. Install the side shield (G) to the support tube (D) securing with cap nuts (C) as shown. Repeat on the other side.
  5. Install the support bar and stud assembly (H) to the side breath guards (E). Repeat for all mounting locations.
  6. Install the top breath guard (I) to the support bar and stud assembly (H) securing with cap nuts (C). Repeat for all mounting locations.

Figure 2: Three Piece Breath Guard Installation Diagram Description: This diagram illustrates the assembly of the three-piece breath guard. It shows uprights (A) attached to studs (B) with cap nuts (C). The support tube (D) connects between the uprights (A) using cap nuts (C). Side breath guards (E) are secured to mounting locations with screws (F) and cap nuts (C). The side shield (G) attaches to the support tube (D) with cap nuts (C). The support bar and stud assembly (H) connects to the side breath guards (E). Finally, the top breath guard (I) is attached to the support bar and stud assembly (H) with cap nuts (C).

Company Information

The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201
U.S.A.

Main Tel: 800.628.0830
Service Tel: 800.628.0832
FAX: 800.752.5620

Vollrath of Canada, Co.
Tel: 800.695.8560
FAX: 800.752.5620

Website: www.vollrathco.com

©2010 The Vollrath Company, L.L.C.

Item Number: 2350030-01 Rev 04/12

Models: R39774 Cafeteria Breath Guard, R39774, Cafeteria Breath Guard, Breath Guard, Guard

File Info : application/pdf, 2 Pages, 788.18KB

PDF preview unavailable. Download the PDF instead.

VOL-R39774 im ?v=1709587305292

References

Adobe InDesign CS4 (6.0.6) Adobe PDF Library 9.0

Related Documents

Preview Vollrath Installation Instructions: Cafeteria Breath Guards
Detailed installation instructions for Vollrath One Piece and Three Piece Cafeteria Breath Guards, including part identification and assembly steps for commercial food service environments.
Preview Vollrath Cafeteria Breath Guard Installation Instructions
Step-by-step installation guide for Vollrath One Piece and Three Piece Cafeteria Breath Guards. Includes parts identification, assembly procedures, and safety notes.
Preview Vollrath Cafeteria Breath Guard Installation Instructions
Detailed installation guide for Vollrath One Piece and Three Piece Cafeteria Breath Guards, including part identification and step-by-step assembly instructions.
Preview Vollrath Cafeteria Breath Guard Installation Guide
Step-by-step installation instructions for Vollrath One Piece and Three Piece Cafeteria Breath Guards, including part identification and assembly details.
Preview Vollrath Cafeteria Breath Guard Installation Instructions
Step-by-step installation guide for Vollrath One Piece and Three Piece Cafeteria Breath Guards, covering assembly of uprights, support tubes, guards, and shields using provided hardware.
Preview Vollrath Breath Guard Installation Instructions: One Piece & Three Piece Models
Comprehensive installation guide for Vollrath one-piece and three-piece cafeteria breath guards. Provides step-by-step assembly instructions, part identification, and important notes for proper setup.
Preview Vollrath Cafeteria Breath Guard Installation Instructions
Detailed installation guide for Vollrath's One Piece and Three Piece Cafeteria Breath Guards. Learn how to assemble and install these essential food service safety barriers with clear, step-by-step instructions and part descriptions.
Preview Vollrath Cafeteria Breath Guard Installation Instructions
Step-by-step guide for installing Vollrath one-piece and three-piece cafeteria breath guards. Includes part identification and assembly details for commercial kitchens.