Manuals+

Vollrath Installation Instructions

One Piece Cafeteria Breath Guard

Three Piece Cafeteria Breath Guard

These instructions cover the installation of the one piece Cafeteria Breath Guard and the three piece Cafeteria Breath Guard.

One Piece Breath Guard Installation

Some units are shipped with a breath guard not installed. To install the breath guard follow these steps:

? Use caution when tightening the cap nuts. Overtightening may cause the plastic to crack.

  1. Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown. See Figure 1. Repeat for all four uprights.
  2. Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
  3. Install the one piece breath guard (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all four mounting locations.
  4. Install the side breath protector (G) to the support tube (D) securing with cap nuts (C) as shown. Repeat on the other side.

Figure 1. One Piece Breath Guard Installation Diagram Description

This diagram illustrates the assembly of the one-piece breath guard. It shows four uprights (A) being attached to studs (B) using cap nuts (C). A support tube (D) connects between the uprights. A one-piece breath guard (E) is secured to the uprights using screws (F) and cap nuts (C). Side breath protectors (G) are attached to the support tube (D) with cap nuts (C).

Three Piece Breath Guard Installation

Some units are shipped with a breath guard not installed. To install the breath guard follow these steps:

? Use caution when tightening the cap nuts. Overtightening may cause the plastic to crack.

  1. Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown. See Figures 1 and 2. Repeat for all four uprights.
  2. Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
  3. Install the side breath guards (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all mounting locations.
  4. Install the side shield (G) to the support tube (D) securing with cap nuts (C) as shown. Repeat on the other side.
  5. Install the support bar and stud assembly (H) to the side breath guards (E). Repeat for all mounting locations.
  6. Install the top breath guard (I) to the support bar and stud assembly (H) securing with cap nuts (C). Repeat for all mounting locations.

Figure 2. Three Piece Breath Guard Installation Diagram Description

This diagram illustrates the assembly of the three-piece breath guard. It shows four uprights (A) being attached to studs (B) using cap nuts (C). A support tube (D) connects between the uprights. Side breath guards (E) are secured to the uprights using screws (F) and cap nuts (C). Side shields (G) are attached to the support tube (D) with cap nuts (C). A support bar and stud assembly (H) is attached to the side breath guards (E). Finally, the top breath guard (I) is secured to the support bar and stud assembly (H) using cap nuts (C).

Models: 39732 Cafeteria Breath Guard, 39732, Cafeteria Breath Guard, Breath Guard

File Info : application/pdf, 2 Pages, 788.18KB

PDF preview unavailable. Download the PDF instead.

VOL-39732 im ?v=1709592854021

References

Adobe InDesign CS4 (6.0.6) Adobe PDF Library 9.0

Related Documents

PreviewVollrath Cafeteria Breath Guard Installation Instructions
Step-by-step installation guide for Vollrath One Piece and Three Piece Cafeteria Breath Guards. Includes parts identification, assembly procedures, and safety notes.
PreviewVollrath Installation Instructions: Cafeteria Breath Guards
Detailed installation instructions for Vollrath One Piece and Three Piece Cafeteria Breath Guards, including part identification and assembly steps for commercial food service environments.
PreviewVollrath Cafeteria Breath Guard Installation Guide
Step-by-step installation instructions for Vollrath One Piece and Three Piece Cafeteria Breath Guards, including part identification and assembly details.
PreviewVollrath Cafeteria Breath Guard Installation Instructions
Step-by-step installation guide for Vollrath One Piece and Three Piece Cafeteria Breath Guards, covering assembly of uprights, support tubes, guards, and shields using provided hardware.
PreviewVollrath Cafeteria Breath Guard Installation Instructions
Official installation guide from Vollrath detailing the setup process for both the one-piece and three-piece cafeteria breath guards. Includes important notes on assembly and part identification.
PreviewVollrath Breath Guard Installation Instructions: One Piece & Three Piece Models
Comprehensive installation guide for Vollrath one-piece and three-piece cafeteria breath guards. Provides step-by-step assembly instructions, part identification, and important notes for proper setup.
PreviewVollrath Cafeteria Breath Guard Installation Instructions
Detailed installation guide for Vollrath's One Piece and Three Piece Cafeteria Breath Guards. Learn how to assemble and install these essential food service safety barriers with clear, step-by-step instructions and part descriptions.
PreviewVollrath Cafeteria Breath Guard Installation Guide
Comprehensive installation instructions for Vollrath one-piece and three-piece cafeteria breath guards, detailing assembly steps and component identification.