Philips Hue Pillar Wireless Lighting

Introduction

This document provides comprehensive instructions for the installation and operation of the Philips Hue Pillar wireless lighting fixture. It covers package contents, necessary tools, step-by-step installation, and remote control usage.

Languages included in this manual: English, German, French, Spanish, Portuguese, Italian.

Package Contents and Tools

Included Items:

• [Component A]: Philips Hue Pillar light fixture
• [Component B]: Mounting bracket
• [Extension module] (optional accessory)
• [Hue remote control]
• [CR2032 battery] for the remote control

Tools Required (Not Included):

• [Cordless drill] for mounting
• [Phillips screwdriver]
• [Flathead screwdriver]
• [Wall plugs] (appropriate for your wall type)
• [Pencil] for marking

Important Safety and Installation Notes:

• [Power OFF required]: Always switch off the main power supply at the circuit breaker before commencing any electrical work.
• [Minimum height]: Ensure the fixture is mounted at least 3 meters from the ground for optimal performance and safety.
• [Maximum height]: The maximum recommended installation height is 2.25 meters.
• [No direct sunlight]: The fixture is not designed for prolonged exposure to direct sunlight.
• [Not for dimmers]: This fixture is not compatible with external dimmer switches; use the Hue app or remote for dimming.
• [GU10 bulb]: The fixture uses a GU10 type bulb socket.
• [Max 20W]: The maximum wattage for the installed bulb is 20W.
• [LED technology]: The product utilizes energy-efficient LED lighting.
• [Double insulation]: This symbol indicates that the fixture has double insulation and does not require grounding.
• [Energy efficiency class E]: The product's energy efficiency rating.

Installation Guide

Step 1: Power Safety

Before starting, turn off the main power supply at the circuit breaker. The diagram shows a finger switching a circuit breaker to the "OFF" position.

Step 2: Mounting the Base

Detach the mounting bracket from the main fixture. Use the bracket as a template to mark the drilling points on the ceiling or wall. Drill the holes and insert wall plugs if required. Securely attach the mounting bracket to the surface using screws.

Step 3: Wiring Connections

Connect the mains supply wires to the corresponding terminals within the junction box. Ensure correct polarity for live, neutral, and earth wires. Diagrams labeled "3a" and "3b" illustrate different wiring configurations, each accompanied by "OK" and "Not OK" indicators to guide correct connection.

Step 4: Securing the Wiring

Ensure all wire connections are secure within the junction box. The diagram shows a wire connector block being fastened.

Step 5: Attaching the Light Fixture Base

Mount the junction box onto the prepared mounting bracket. Align the base of the light fixture with the bracket and secure it by screwing it into place.

Step 6: Final Assembly and Power On

Attach the main body of the light fixture to the base by screwing it on. Once the fixture is securely mounted, turn the main power supply back ON at the circuit breaker. Install the specified [GU10] LED bulb (maximum 20W). The Hue serial number is typically located on the fixture itself.

Operating Your Hue Pillar

The included Hue remote control provides intuitive operation of your Pillar lighting fixture.

Remote Control Functions:

• [Power Button] (represented by a power symbol): [Click] the button to turn the light on or off.
• [Asterisk Button] (represented by an asterisk symbol): [Click] the button to cycle through different brightness levels. [Hold] the button to continuously dim the light up or down.
• [Hue Button] (represented by the Hue logo): [Click] the button to cycle through various preset lighting scenes, such as Read, Relax, Concentrate, and Energize.

Remote Control Placement

The Hue remote control is designed for convenience and can be magnetically attached to suitable metallic surfaces, such as a refrigerator door, for easy access.

Support and Resources

For additional support, detailed setup guides, troubleshooting tips, and more information about Philips Hue products, please visit the official Philips Hue website.

Official Website: www.philips-hue.com

Product specific information and setup: www.philips-hue.com/connectproduct

[Support/Help]: Access the support section on the website for further assistance.