Philips Hue Runner

Included Items

• User Manual (Item A)
• User Manual (Item B)
• 1 x CR2032 battery
• Hue remote control
• Hue dimmer switch extension

Excluded Items

• Drill
• Screws and wall plugs
• Pencil
• Phillips and flathead screwdrivers

Safety and Specifications

• Suitable for indoor use only ?
• Maintain a minimum distance of 3 meters from other light sources ?
• Avoid direct sunlight exposure ☀️❌
• Not compatible with traditional dimmer switches ?❌
• Class II - Double insulated ?
• Compatible cable size: 3/8" (8mm) ?
• Ensure a minimum clearance of 5cm from the ceiling ?
• Requires GU10 bulb type.
• Maximum bulb wattage: 5.5W.
• Do not use halogen bulbs ?❌
• Compatible with LED bulbs ✅
• Energy efficiency class E ⚡️

Installation Guide

Important: Ensure power is OFF before installation. ⚠️

Turn off the main power supply at the circuit breaker. ?➡️ OFF

Step 1: Mount the fixture base

Drill holes in the ceiling according to the base template. Insert wall plugs if necessary. Secure the fixture base to the ceiling using the provided screws. Ensure the base is firmly attached. (Verify correct and secure mounting).

Step 2: Connect wiring

Open the terminal block cover on the fixture base. Insert the electrical wires into the correct terminals and tighten them securely.

Step 3: Connect light modules

Connect the light modules to the fixture base. Push the connectors until they click into place. (Repeat for 2x modules).

Step 4: Connect modules to power

Connect the light modules to the power supply. Push the connectors until they click into place. (Repeat for 2x modules).

Step 5: Attach light heads

Attach the light heads to the fixture base. Secure each light head using the provided screws.

Step 6: Final Assembly

Complete the assembly by attaching any remaining light heads. Confirm all connections are secure and assembly is correct.

Operation and Adjustment

Important: Ensure power is ON before testing. ⚠️

Turn on the main power supply at the circuit breaker. ?➡️ ON

Install Bulb

Insert the GU10 bulb into the socket. Ensure it is seated correctly. The Hue serial number is printed on the bulb.

Adjust Light Direction

The light heads can be adjusted: Horizontal rotation +/- 350°, Vertical tilt +/- 90°.

Hue Dimmer Switch Operation

• LED blink indicates pairing or status.
• Click the power button for on/off ▶️
• Hold the power button to dim up/down ⬆️⬇️
• Click the Hue button to cycle through scenes ? (e.g., Relax, Concentrate, Energize).

Dimmer Switch Installation

Mount the dimmer switch on the wall using appropriate mounting materials (not included). The dimmer switch can also be attached magnetically to suitable surfaces like refrigerators. ?

Further Information

For more information and setup assistance, visit www.philips-hue.com or www.philips-hue.com/connectproduct.