BIGBIG WON Rainbow S Game Controller User Manual

01. Parts Display

The controller features a detailed layout with the following components: Mode Indicator Light (?), LT, LB, Video Button, LS (Left Joystick), A/B/X/Y Action Buttons, LED1, LED2, RT, RB, Menu Button, LED3, LED4, Triangle Button, Cross Button, RS (Right Joystick), Home Key, M2, USB Connector (?), M1, 3.5mm Headphone Jack (?), FN, M1, Type-c Cable Cord (?).

Packing List:

• Rainbow S Game Handle *1
• Manual *1
• Certificate of Pass *1
• 1.8m Ultra-light Data Cable *1

Supported Platforms:

• Win10/11
• Switch

02. BIGBIG WON Support APP

The controller supports real-time data control via the dedicated BIGBIG WON Support APP. While shortcut settings offer basic control, the app provides advanced customization for lighting effects, motion sensor, joysticks, triggers, buttons, and macros, offering more detailed visual control. Users can save and load custom configurations for multiple controllers.

Caution: Applying settings via the app after using shortcut settings may lead to conflicts. The app might create an "Unnamed" profile by scanning the controller's current settings.

03. Connection

This is a wired controller. Connect it to your device using the provided Type-C cable.

Important: The controller supports both Xinput and Switch modes. Ensure you switch to the correct mode for your platform: Xinput for PC, Switch for Nintendo Switch. The default mode is Xinput.

• For Steam: On PC, navigate to Steam's 'Settings' > 'Controller' > 'General Controller Settings' and enable 'XBOX ACCELERATOR SUPPORT'. Failure to do so may result in the game not recognizing the controller.
• For Switch: On Nintendo Switch, go to 'Settings' > 'Controllers and Sensors' and enable 'Pro Controller Wired Communication'.

04. Mode Change

The controller supports both Xinput and Switch modes. To switch modes:

To Switch Mode: Press and hold the A + HOME buttons for 3 seconds until the mode indicator light turns red.

To Xinput Mode: Press and hold the B + HOME buttons for 3 seconds until the mode indicator light turns green.

05. Lighting Effects

The controller features built-in lighting effects. Double-click the FN button to toggle them on or off. Shortcut settings allow cycling through preset effects. For advanced customization of color, brightness, modes, and speed, use the BIGBIG WON Support APP.

06. Key Mapping

The controller includes two extendable back buttons (M1/M2) with key remapping capabilities.

Key Mapping Setup:

1. Press FN + (M1/M2). The mode indicator will turn green.
2. Press the front button you wish to map to M1 or M2.
3. The mode indicator will flash green twice, confirming successful mapping.

Key Mapping Removal:

1. Press the back button (M1/M2) you want to unmap.
2. Double-click the FN button.
3. The mode indicator will flash twice, confirming successful unmapping.

Shortcut settings only support mapping front buttons to the back buttons (M1/M2). The companion app allows remapping of all controller buttons.

07. Rapid Fire

The controller supports rapid fire for eight buttons: A, B, X, Y, LT, RT, LB, and RB.

Rapid Fire Setup:

1. Press FN + the desired button. The orange mode indicator will flash, indicating successful activation.
2. The 2nd and 3rd LEDs will flash according to the rapid fire frequency.

Rapid Fire Removal:

1. Press the button for which you want to cancel rapid fire.
2. Double-click the FN button.
3. The orange mode indicator will flash, confirming the removal of rapid fire.

Rapid Fire Frequency: Press FN + [Left Arrow] button to cycle through 5/s, 10/s, and 20/s frequencies (default is 5/s).

Shortcut settings are limited to the eight specified buttons. The app allows enabling rapid fire for all controller buttons.

08. Macro Recording

The controller features macro recording. Each macro set requires binding a back button (M1/M2) as a trigger. Recordable inputs include A, B, X, Y, LT, RT, LB, RB, RS, LS, and the eight directions of the joysticks.

Record Macro:

1. Press and hold FN + (M1/M2) for 3 seconds. The mode indicator will flash red, entering macro recording mode.
2. Press controller buttons to record the macro sequence.
3. Press FN to finish recording. The mode indicator will flash red twice, indicating completion.
4. During macro playback, the 4 LEDs will flash from left to right until the macro finishes.

Cancel Macro:

1. Double-click the macro button (M1/M2) you wish to cancel.
2. The red mode indicator will flash twice, confirming the macro has been removed.

Shortcut settings provide basic macro recording functionality. The BIGBIG WON Support APP allows for detailed editing of step durations and intervals, saving multiple macro sets, and creating a macro database for immediate use.

09. Motion Sensor

The controller supports motion sensing using its built-in gyro for controlling joystick input. It offers three modes: "Left Joystick Full Sensor", "Right Joystick Full Sensor", and "Right Joystick Responsive Sensor".

Activating Motion Sensor Modes:

• Press FN + Left Joystick (LS) to activate "Left Joystick Full Sensor".
• Press FN + Right Joystick (RS) to activate "Right Joystick Full Sensor".
• Press FN + [Button to set] + Right Joystick (RS) to activate "Right Joystick Responsive Sensor".

Shortcut settings can only toggle the motion sensor on or off. For nuanced control tailored to different games, it is recommended to use the BIGBIG WON Support APP to configure specific motion sensor settings.

Note: For games that utilize the Switch platform's native sensor functionality, separate motion sensor activation is not required.

10. SWITCH Native Sensor

Many games on the Nintendo Switch console allow for direct sensor control without needing to configure the controller's motion sensor. Ensure the motion sensor function is turned off in these instances.

11. Gyro Calibration

To calibrate the gyro:

1. Place the controller on a horizontal surface.
2. Press and hold the FN + [Triangle Button]. All 4 LED indicators will flash.
3. Calibration is complete when the LED indicators flash twice and then turn off.

12. Quick Trigger

The Quick Trigger function optimizes rapid clicking for linear triggers. Once activated, a trigger remains in the "closed" state after being pressed, allowing for immediate re-triggering without a full release, thus maximizing click speed.

Quick Trigger On/Off:

1. Press the [Triangle Button] + Trigger (LT/RT). The blue mode indicator will flash twice to confirm successful setting/completion.

Shortcut settings can only toggle the Quick Trigger on or off. The BIGBIG WON Support APP allows for more advanced control, including trigger left/right adjustments and deadzone settings (front and back).

13. Joystick Trigger Calibration

This calibration is necessary if you experience joystick drift, incomplete maximum input, or if trigger auto-activation values are not reaching maximum linear values.

Calibration Procedure:

1. Simultaneously press and hold the View Button + Menu Button for 3 seconds. All 4 LED indicators will flash slowly.
2. Push the joysticks to their extreme limits and rotate them 3-5 times at a uniform speed.
3. Press the LT/RT buttons to their extreme limits and release 3-5 times.
4. Finally, press and hold the View Button + Menu Button simultaneously. The LEDs will flash twice and turn off, indicating calibration is complete.

14. Screenshot

The controller supports one-touch screenshot functionality. Press the [Triangle Button] in either Xinput or Switch mode to capture your screen.

(On PC platforms, screenshots are saved in 'Computer' > 'Images' > 'Screenshots'.)

15. Audio

The controller supports audio input and output. Connect headphones with a microphone to the 3.5mm audio port located on the bottom of the controller.

You can adjust the audio volume using the FN + [Up Arrow]/[Down Arrow] key combination (volume control is supported on PC platforms only).

16. Vibration Control

The controller features 4-level vibration control. Press FN + [Right Arrow] to adjust the vibration intensity of the trigger motors. Options include Strong, Medium, Weak, and Off.

17. Initialize Reset

To reset the controller to its factory default settings, press and hold the HOME button for 10 seconds. The controller will vibrate to confirm the reset.

18. Detailed Function Operation Description

For detailed tutorials and further information, please visit the official BIGBIG WON website:

BIGBIG WON Official Website > Support Page: https://www.bigbigwon.com/support

19. Your Rights

The product warranty period is 12 months from the date of purchase.

You can download the BIGBIG WON Support APP and access video tutorials via the official website.

BIGBIG WON provides comprehensive product support and services, including video tutorials, upgrade tools, and digital manuals. Visit:

www.bigbigwon.com/support

BIGBIG WON SUPPORT