Honeywell

Product Overview

The Honeywell Suono P400 Bluetooth Speaker is a multifunctional audio device. This manual provides instructions for its use and maintenance.

Model: Suono P400 Bluetooth Speaker, Platinum Series

Product Code: HC000117/AUD/BTS/P400/BLK

Manufactured by Secure Connection Limited, Hong Kong. The Honeywell trademark is used under license from Honeywell International Inc.

Contact Information:
Secure Connection Limited
Flat H, 11th Floor, Tower 6, Grand Water Front, 38 San Ma Tau Street, To Kwa Wan, KL, Hong Kong
Customer Care Email: support@honeywellconnection.com
Tel.: +852 5803 1828
Web: www.honeywellconnection.com

©2024 Secure Connection Limited, Hong Kong. All rights reserved.

Welcome

Dear Customer, Thank you for purchasing Honeywell Suono P400 Bluetooth Speaker. In order to facilitate the installation and use of this Multifunctional Bluetooth Speaker, we recommend that you carefully read this manual, and keep it stored safely. To ensure that you always enjoy quality sound, please use this manual for proper use and maintenance of your product.

If any questions arise during use, please consult this manual. If it is in accordance with the warranty, we kindly welcome you to contact us at: support@honeywellconnection.com

We welcome any comments or suggestions you may have about our products and service.

Contents

1. What's in the Box
2. Performance Index
3. Product Appearance and Structure
4. Function Description
5. How to Operate
6. Precautions for Use
7. Troubleshooting

Performance Index

¹ The IP rating determines how resistant something is to environmental elements. Most IP numbers read IPXX: each "X" being a placeholder for a number. The first number represents the level of resistance to dust/particles and the second representing its ability to withstand liquid.
² Sound quality depends to a great extent on the size of the diaphragm, which is indicated by the driver diameter: the larger the diameter, the better the sound quality.
³ Signal to Noise Ratio is defined as the ratio of signal power to the noise power, it is represented in decibels.
&sup4; Impedance refers to the load a speaker places on an amplifier. Technically, impedance is the "resistance" a speaker offers to the current supplied by an amplifier because the output current of an amplifier is AC (not DC, like from a battery), this resistance is called impedance.

Product Appearance and Structure

The speaker features a cylindrical design with a mesh grille. Key controls and ports are located on the top panel. The main controls are represented by symbols:

• O button: Power, Play/Pause, Answer/End Call, RGB Mode control.
• - button: Volume Down, Skip Previous Track.
• + button: Volume Up, Skip Next Track.
• Input Mode Button (often combined with O or a dedicated button): Switches between Bluetooth, Aux, MicroSD, and USB input modes.
• USB-C Port: For charging.
• 3.5mm AUX Input: For wired audio connection.
• MicroSD Card Slot: For playing audio files directly from a card.
• USB Flash Drive Port: For playing audio files from a USB drive.

Function Description

Indicator Light Status

How to Operate

Charging

Before Powering ON for the first time, please charge fully for good battery life.

1. Plug the small end of the Type C cable into the Type C connector port on the speaker.
2. Plug the other end into a USB wall charger/computer/power bank that is powered on.

Powering On

Long press the O button to power on/off the device.

Pairing Via Bluetooth

Connecting any Bluetooth device:

1. When the speaker is turned on, it automatically enters Bluetooth pairing mode.
2. Open the Bluetooth settings on any Bluetooth device and search for device with name "Suono P400" and connect.

Note:
1. "Suono P400 Bluetooth Speaker" will automatically re-pair with the last paired device whenever it is within range.
2. Devices with older Bluetooth versions may prompt you to input a passcode key. Please enter "0000" on your device and press OK to successfully connect with “Suono P400 Bluetooth Speaker”.

MicroSD Card Operation

When a microSD card is inserted, the audio/music stored in the microSD card will automatically start playing.

Note:
1. Supports MP3 and WAV audio formats only.
2. The speaker also has a memory function that will recall and continue from the last-played track whenever a microSD Card is reinserted into the speaker.

Aux Cable Operation

Insert the 3.5mm AUX cable into the AUX input. "Suono P400 Bluetooth Speaker" is ready to play audio/music through AUX mode.

USB Function

When a USB Flash drive is inserted, the audio/music stored in the USB Flash drive will automatically start playing.

Note:
1. Speaker is compatible with USB Flash Drives up to 64GB in size and supports MP3 and WAV audio formats only.
2. The speaker also has a memory function that will recall and continue from the last-played track whenever a USB Flash drive is reinserted into the speaker.

Dual Speaker Pairing

Pair two speakers together for stereo sound.

1. Power on both the Speakers.
2. While both the speakers are in Bluetooth pairing mode, double press the O button on 1 speaker to pair the speakers together.
3. Connect the speaker to a Bluetooth device. Now you can play music on both the speakers at the same time from a single Bluetooth device.
4. Power off any 1 speaker to disable dual speaker pairing mode.

Note: Performance may vary based on a mobile device, distance, and environmental factors.

RGB Mode

When a speaker is powered on, it automatically enters RGB Mode.

Note:
1. Short press the O button to switch the RGB Lights.
2. Long press the O button to turn on/off RGB Mode.

Precautions For Use

• Do NOT use at high volume for any extended period to avoid hearing damage.
• Do NOT use while driving for phone calls or any other purpose.
• Do NOT use if there is any loud unusual noise. If this happens, please contact us at support@honeywellconnection.com.
• This product contains small parts which may be a choking hazard. Not suitable for children under the age of 3.
• This product contains magnetic material. Consult your physician before using the product in case you have a medical implant of any type.
• Do NOT attempt to disassemble this product as this may lead to a hazard and will void the warranty.
• Use this product only with the power supply provided along with this product (applicable for selected models only).
• Do NOT use this product near any form of excessive heat such as gas appliances and heating appliances.

Troubleshooting