WISENET TID-600R Network Intercom

Important Information

Before connecting the supply, please check the 'Manuals' section on our website:

https://www.hanwha-security.com/en/data-center/download-data/

For integration with VMS or Hanwha NVR, it is recommended to use the officially compatible VMS version or the latest Hanwha NVR version.

Environmental Compliance

Hanwha Techwin is committed to environmental responsibility throughout its product manufacturing. The Eco mark (eco RoHS compliant) signifies Hanwha Techwin's dedication to creating environmentally friendly products that comply with the EU RoHS Directive.

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

This marking on the product, accessories, or literature indicates that the product and its electronic accessories (e.g., charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent harm to the environment or human health from uncontrolled waste disposal, please separate these items from other waste and recycle them responsibly to promote the sustainable reuse of material resources.

Household users should contact their retailer or local government office for details on environmentally safe recycling. Business users should contact their supplier and review purchase contract terms. This product and its accessories should not be mixed with commercial waste.

Correct disposal of batteries in this product

(Applicable in the European Union and other European countries with separate battery return systems.)

This marking on the battery, manual, or packaging indicates that batteries should not be disposed of with household waste. If marked with chemical symbols Hg, Cd, or Pb, the battery contains mercury, cadmium, or lead above EU Directive 2006/66 reference levels, which can harm health or the environment if not properly disposed of.

To protect natural resources and promote material reuse, separate batteries from other waste and recycle them through your local, free battery return system.

Safety Information

• ⚠️ Warning symbol.
• Depicts the intercom unit exposed to fire ? and extreme cold ❄️, with a person shivering. This illustrates that the product should be protected from fire and extreme temperatures.
• Depicts the intercom unit near a fuel canister with a prohibition symbol ?⛽. This indicates the product should be kept away from flammable liquids.

Component

Accessories may vary by sales country.

Included Components:

• WISENET Network Intercom Unit (TID-600R)
• Mounting bracket
• Screws and anchors
• Wire connectors and terminal blocks
• LAN connector
• Power adapter connector
• Allen key (TR20)

Optional Components (not included):

• Skin Cover: White (SBC-165W)
• Tilt mount (SBS-165TM)
• Flush mount (SHS-165F)

Installation

1. Step 1: Mount the bracket using the provided TR20 screw.
2. Step 2: Insert a Micro SD Card (not included) into the slot. The terminal block includes connections for: VIDEO, RESET, TAMPERING, ALARM IN 1, ALARM IN 2, ALARM OUT 1, GND, +12V OUT, COM, NO/NC, and PoE.
3. Step 3: Drill mounting holes. Recommended installation height: Minimum 24.5 cm (9.6 in) to Maximum 117.1 cm (46.1 in). Vertical range: 36 cm (14.2 in) to 266 cm (104.7 in). Horizontal range: 74 cm (29.1 in) to 228 cm (89.8 in). Optimal viewing angle: 114°. Distance from wall: 75 cm (29.5 in). Unit dimensions: 111 mm (4.4 in) width, 29 mm (1.1 in) height. Considerations for wheelchair users are indicated.
4. Step 4: Connect PoE and DC12V power sources.
5. Step 5: Attach the intercom unit to the mounting bracket.
6. Step 6: Install the network cable, routing it through the bracket.
7. Step 7: Install alarm and power cables, routing them through the designated openings.
8. Step 8: Connect the cables to the intercom unit.
9. Step 9: Connect wires to the terminal block, following the pin assignments.
10. Step 10: Secure the intercom unit to the wall using screws.
11. Step 11: Make final wiring connections to the terminal block, ensuring correct pin assignments for ALARM IN 1/2, ALARM OUT 1, GND, +12V OUT, COM, NO/NC, and PoE.
12. Step 12: Wiring diagram illustrating connections to the terminal block.
13. Step 13: Final physical attachment of the intercom unit to its mounting.
14. Step 14: Secure the unit with screws.
15. Step 15: Setup for touchless call: Navigate through the device menu: <Setup (⚙️)> → <Intercom> → <Call Setup> → <Touchless call> → <Enable>.
16. Step 16: Setting up Alarm output for Fail-Safe type door strike (Opens upon power outage). Select Type: N.C. (Normal Close) for Alarm output 2 (NO/NC port).
17. Step 17: Setting up Alarm output for Fail-Secure type door strike (Closes upon power outage). Select Type: N.O. (Normal Open) for Alarm output 2 (NO/NC port). Wiring diagram shows connection for 12V(+) and GND(-) to the door strike.
18. Step 18: Connect the power adapter to an AC outlet and to the device. Connect the network cable.
19. Step 19: Software setup: Use the DEVICE MANAGER and refer to the User Manual (PDF icon).

Password Setting and Login

When accessing the intercom for the first time, you must register the login password.

Administrator Password Change

Fields are provided for entering a "New password" and confirming it.

Password Complexity Rules:

• For passwords 8 to 9 characters long: Must include a combination of at least 3 character types (uppercase/lowercase letters, numbers, special characters).
• For passwords 10 to 15 characters long: Must include a combination of at least 2 character types.
• Allowed special characters: ~!@#$%^*()_-+=|{}[].?/
• Passwords cannot use more than 4 consecutive characters (e.g., 1234).
• Passwords cannot use the same character 4 or more times consecutively (e.g., !!!!).
• User names cannot be used as passwords.

Security Tip: For higher security, avoid repeating the same characters or consecutive keyboard inputs.

Password Reset: If you lose your password, you can press the [RESET] button to initialize the product. It is recommended to use a memo pad or memorize your password.

Login Procedure:

1. Enter "admin" in the <User Name> input box.
2. Enter your password in the <Password> input field.
3. Click [Sign in].

Contact and Compliance Information

EAC Certification: Subject to use as intended under normal conditions. Service life: 7 years. (Original text in Russian)

Global Offices:

• Head Office (Korea): 6, Pangyo-ro 319 beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-400 Rep. of KOREA. Tel: +82.70.7147.8753, Fax: +82.31.8018.3740. www.hanwha-security.com
• Hanwha Techwin America: 500 Frank W. Burr Blvd. Suite 43 Teaneck, NJ 07666. Toll Free: +1.877.213.1222, Direct: +1.201.325.6920, Fax: +1.201.373.0124. www.hanwhasecurity.com
• Hanwha Techwin Europe: Heriot House, Heriot Road, Chertsey, Surrey, KT16 9DT, United Kingdom. Tel: +44.1372.235663, Fax: +44.1932.57.8101. www.hanwha-security.eu
• Hanwha Techwin (Tianjin) Co. Ltd: Room 3F2C302, microelectronics investment service center, no.1 qianxuesen road, microelectronics industrial park, Tianjin economic and technological development area, China. Contact: 800.818.1212 / 400.690.6677. www.hanwha-security.cn
• Hanwha Techwin Middle East FZE: JAFZA View 18, 20th floor, office 2001, 2002, 2003, Downtown Jebel Ali, Dubai, United Arab Emirates. www.hanwha-security.com
• Hanwha Techwin Vietnam Hanoi Office: 28th Floor, Handico Building, Pham Hung Street, Me Tri ward, Nam Tu Liem District, Hanoi City, Vietnam. Tel: +84.91.982.40.88. www.hanwha-security.com

Note: Distributor information for Turkey (in Turkish) and compliance details (in Russian) were present in the original document but are summarized here in English for coherence.