Wisenet Network Camera Quick Guide
Models: XNV-6080RSA / XNV-8080RSA
This guide provides essential information for installing and setting up your Wisenet Network Camera.
Components
The following components are typically included with the camera. Please note that accessories may vary by sales country.
- Camera unit
- Mounting hardware (screws, brackets)
- Power adapter/cable
- Network cable
- Audio/Alarm cables
- Hex wrench
- Terminal blocks
- Mounting plate
- User manual (referenced as '15' in diagrams)
Not Included: SD CARD, WiFi dongle, OTG adapter.
Diagram Description: A collection of various camera accessories and connection parts are illustrated.
Installation Precautions
Please observe the following warnings during installation:
- [Warning: Potential vibration damage] - Ensure the camera is securely mounted to prevent damage from vibrations.
- [Warning: Avoid extreme temperatures and moisture] - Protect the camera from fire, excessive cold, and moisture.
- [Warning: Do not use flammable liquids for cleaning] - Avoid using flammable liquids when cleaning the camera.
Installation Steps
Follow these steps for proper installation:
Step 1-2: Prepare Mounting
Attach the mounting plate to the desired surface. Ensure it is level and secure.
Diagram Description: Shows attaching a circular mounting plate to a surface, possibly a ceiling or wall mount, with screws. Arrows indicate the direction of attachment.
Step 3-4: Mount Camera Body
Secure the camera body to the mounting plate. This may involve aligning and locking mechanisms.
Diagram Description: Illustrates attaching the camera unit to the previously mounted plate, possibly with a twist-lock mechanism.
Step 5-6: Connect Cables
Connect the necessary cables to the camera's terminals:
- Power: Connect to AC 24V or DC 12V power source.
- Network: Connect the network cable for data transmission.
- Audio: Connect audio input/output devices if applicable.
- Alarm: Connect alarm input/output devices.
- Ground: Connect the ground wire for safety.
Diagram Description: Close-up views of the camera's connection ports, showing where to plug in power (AC/DC), network, audio, and alarm cables. Labels like 'BLACK GND', 'ORANGE ALARM-OUT', 'BROWN ALARM-IN' are visible.
Step 7-8: Insert SD Card and Connect USB
Insert a MicroSD card into the designated slot for local storage. Connect any USB devices if required.
Diagram Description: Shows inserting a MicroSD card into a slot and connecting a USB device to the camera.
Step 9-10: Cable Management and Final Connections
Route cables neatly and make final connections. Ensure all connections are secure.
Diagram Description: Illustrates routing cables through the mounting bracket and making final connections to the camera.
Step 11-12: Connect WiFi Dongle/OTG Adapter
If using WiFi connectivity, connect the WiFi dongle to the Micro USB terminal. An OTG adapter may also be required.
Diagram Description: Shows connecting a WiFi dongle and/or OTG adapter to the Micro USB port on the camera.
Step 13-14: Final Mounting and Power On
Complete the physical mounting and connect the power supply. The camera will power on.
Diagram Description: Shows the final mounting of the camera and connection to power.
Step 15-16: Mobile App Setup
Install the Wisenet Installation application on your smartphone. Connect to the camera's WiFi SSID and use the app to configure settings and adjust the viewing angle.
Diagram Description: A smartphone displaying the Wisenet Installation app interface, with a finger icon indicating interaction.
Step 17-20: Camera Adjustment and Setup
Adjust the camera's field of view as needed. The diagrams show examples of camera placement and how the view covers an area with people moving through it. Final setup may involve using the Device Manager software and the User Manual (referenced as '15').
Diagram Description: Shows adjusting the camera's pan/tilt/zoom. Other diagrams illustrate the camera's coverage in different scenarios, showing people entering a room or hallway. Step 20 shows a computer with 'DEVICE MANAGER' and 'User Manual' open, connected to the camera, with a TR20 screwdriver and a checkered flag symbol.
Password Setting and Login
When accessing the camera for the first time, you must set a login password.
Password Requirements:
- For passwords 8-9 characters long: Use at least 3 types (uppercase, lowercase, numbers, special characters).
- For passwords 10-15 characters long: Use at least 2 types.
- Allowed special characters: `~!@#$%^*()_-+=|{}[].?/`
- Avoid using 4 or more consecutive identical characters (e.g., `!!!!`) or sequential characters (e.g., `1234`, `abcd`).
- Usernames should be different from passwords.
If you forget your password, press the [RESET] button to initialize the product.
Login Process:
- Enter "admin" in the <User Name> field.
- Enter your password in the <Password> field.
- Click [Sign in].
Connecting to WiFi
Camera Setup:
- Connect an OTG adapter (5-pin) and WiFi dongle to the camera's Micro USB terminal.
Smartphone Setup:
- Install the Wisenet Installation application on your smartphone.
- Select the camera's SSID after turning on the WiFi.
- Run the Wisenet Installation application.
- Log in to the camera; the video feed will connect. The video may play without login during the initial connection.
- You can adjust the camera's angle of view using the smartphone application.
Environmental Information
Hanwha Techwin is committed to providing environmentally friendly products. The Eco mark signifies compliance with the EU RoHS Directive.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment):
This marking indicates that the product and its accessories should not be disposed of with household waste. Separate these items for responsible recycling to promote sustainable resource reuse. Contact your retailer or local government for disposal details.
Correct Disposal of Batteries:
Batteries should not be disposed of with household waste. Chemical symbols (Hg, Cd, Pb) indicate the presence of restricted substances. Dispose of batteries separately through your local, free battery return system to protect natural resources and human health.
Contact Information
Hanwha Techwin
Head Office (Korea):
6, Pangyo-ro 319 beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-400 Rep. of KOREA
Tel: +82.70.7147.8753 | Fax: +82.31.8018.3740
Website: www.hanwha-security.com
Hanwha Techwin America:
500 Frank W. Burr Blvd. Suite 43 Teaneck, NJ 07666
Toll Free: +1.877.213.1222 | Direct: +1.201.325.6920 | Fax: +1.201.373.0124
Website: www.hanwhasecurity.com
Hanwha Techwin Europe:
Heriot House, Heriot Road, Chertsey, Surrey, KT16 9DT, United Kingdom
Tel: +44.1372.235663 | Fax: +44.1932.57.8101
Website: www.hanwha-security.eu
Hanwha Techwin (Tianjin) Co.Ltd:
Room 3F2C302, microelectronics investment service center, no.1 qianxuesen road, microelectronics industrial park, Tianjin economic and technological development area, China
Customer Service Hotline: 800.818.1212 / 400.690.6677
Website: www.hanwha-security.cn
Hanwha Techwin Middle East FZE:
JAFZA View 18, 20th floor, office 2001, 2002, 2003, Downtown Jebel Ali, Dubai, United Arab Emirates
Website: www.hanwha-security.com
Hanwha Techwin Vietnam Hanoi Office:
28th Floor, Handico Building, Pham Hung Street, Me Tri ward, Nam Tu Liem District, Hanoi City, Vietnam
Tel: +84.91.982.40.88
Website: www.hanwha-security.com
Korean contact information (page 17):
경기도 성남시 분당구 판교로 319번길 6 (삼평동 701)
TEL 070-7147-8771~9 (A/S 및 기술문의 1588-5772)
영업소:
- 부산: TEL 051-796-3216
- 대구: TEL 053-742-3098
- 광주: TEL 062-941-9559
- 대전: TEL 042-489-9840
Website: www.hanwha-security.com
Hanwha Vision - Global Vision Solution Provider
Hanwha Vision Europe Limited - Total technology security solutions provider
