Whirlpool Refrigerator Quick Guide
Thank you for buying a Whirlpool product. To receive more complete assistance, please register your product on www.whirlpool.eu/register.
Before using the appliance, carefully read the Safety Instruction.
First Time Use
Wait at least two hours after installation before connecting the appliance to the power supply. Connect the appliance to the power supply; it starts operation automatically. The ideal storage temperatures for food are preset at the factory.
After turning the appliance on, you must wait for 4-6 hours for the correct storage temperature to be reached for a normally filled appliance. Position the antibacterial anti-odour filter in the fan as demonstrated in the filter packaging (if available). If an audible signal sounds, it means that the temperature alarm has intervened: press the [Sound alarm button] to switch off the acoustic alarms.
Control Panel
Button Functions:
- 1. On/Stand-by
- Press the [On/Stand-by button] for 3 seconds to turn the appliance off. In Stand-by mode, the [On/Stand-by icon] will light up, and the light in the refrigerator compartment will not turn on. To turn the product on again, a brief press on the [On/Stand-by button] is sufficient. Note: this procedure does not disconnect the appliance from the electricity supply.
- 2. Temperature Display
- The display shows the refrigerator compartment temperature (between 2°C and 7°C). To avoid food waste, please refer to the recommended setting and storage times found in the online user manual.
- 3. Key Lock
- The key lock can be activated/deactivated by keeping the [Key lock button] pressed for 3 seconds, until a confirmation sound is heard (the [Key lock icon] lights up immediately and disappears within a few seconds). If you press any button while the key lock is active, you will hear a sound, and the [Key lock icon] will flash.
- 4. Turning Off the Sound Alarm
- To turn off the sound alarm, briefly press the [Sound alarm button].
- 5. Appliance Temperature
- It is possible to set a different temperature with the [Temperature button] (°C).
- Fast Freeze/Cool Function (Fast Cooling)
- To quickly cool the refrigerator compartment, or six hours before putting a large quantity of food to be frozen in the freezer compartment (if available), turn on the "Fast Cooling" function by pressing the [Temperature button] (°C) for 3 seconds. When the function is turned on, the [Fast Cooling icon] will be displayed. The function turns off automatically after 6 hours, or manually by pressing the [Temperature button] (°C) for 3 seconds. Note: do not put foods that are to be frozen in contact with others that are already frozen. Recommended setting: -18°C.
- 6. Vacation (Holiday Mode)
- You can use this function in the event of your prolonged absence. Press the [Vacation button] for 3 seconds to turn the function on. The display will show the temperature of the refrigerator compartment (12°C), and the [Vacation icon] will light up. After activating the function, remove the food from the appliance and keep the door closed – the appliance will maintain a suitable temperature to prevent odours from forming. To turn off the function, press briefly the [Vacation button] or the [Temperature button] (°C).
* Available only on certain models
How to Store Fresh Food and Beverages
Refrigerator Compartment
"0° Zone" Compartment
The "0° ZONE" compartment is specifically designed to maintain a low temperature and the correct humidity to preserve fresh food for longer (for example, meat, fish, fruits, and winter vegetables). Humidity control technology coupled with Active0 provides the best food preservation when food is not completely packed.
Turning On and Turning Off the Compartment
The internal temperature of the compartment is approximately 0°C when the compartment is turned on. To turn on the compartment, press the [Compartment button] (1) for more than one second until the symbol (2) lights up. The lit symbol (2) means that the compartment is working. Press the [Compartment button] (1) again for more than one second to turn off the compartment. The temperature inside depends on the general temperature of the refrigerator.
Conditions for Correct Functioning
For the correct functioning of the "0° ZONE" compartment, it is necessary that:
- The appliance is turned on.
- The fridge temperature is between 2°C and 6°C.
- The "0° ZONE" compartment is turned on.
- Vacation Mode and Stand-by are not selected.
Notes:
- If the symbol does not light up when you turn on the compartment, check that the drawer is properly inserted. If the problem persists, contact the authorised Technical Assistance Service.
- When the "0° ZONE" compartment is inserted in the appliance, you may hear a faint noise, which should be considered normal.
Important: Be careful when positioning small food items and containers on the upper shelf of the "0° ZONE" compartment to prevent them from accidentally falling between the shelf and the back wall of the refrigerator compartment.
Removing the "0° Zone" Compartment
Carry out the following steps:
- To make it easier to remove the compartment, it is recommended that you empty (and possibly remove) the lower door shelves.
- Remove the compartment by rotating it upwards.
- Remove the white plastic shelf under the compartment.
Note: it is not possible to remove the upper shelf and side supports.
To use the "0° ZONE" compartment again, carefully reposition the white plastic shelf under the compartment before inserting the drawer and turning the function back on.
Recommendation for Space and Energy Saving
To have a larger refrigerator volume and to reduce energy consumption, it is recommended to remove the "0° ZONE" compartment.
Cleaning
Clean the compartment and its components occasionally using a cloth and a solution of warm water (taking care not to submerge the white plastic shelf under the drawer) and neutral cleaning agents specifically for cleaning the inside of the refrigerator. Do not use abrasive cleaning agents. Before cleaning the compartment (also externally), it is necessary to remove the drawer to disconnect the electrical supply.
Fan
The fan is pre-set to ON. You can turn the fan on/off by pressing the [Fan button] and [Another button] at the same time for 3 seconds. The lit [Fan icon] indicates that the fan is on and therefore the ProFresh function is active.
If the ambient temperature exceeds 27°C, or if drops of water are present on the glass shelves, it is essential that the fan is on to ensure the proper preservation of food. Deactivation of the fan allows energy consumption to be optimised.
Note: the fan restarts automatically after a power cut or after turning off the appliance.
* Available only on certain models
Freezer Compartment
Freezing Fresh Food
- It is advisable to set the temperature colder or turn on the Fast Freeze/Fast Cool* at least four hours before removing food from the freezer compartment, to prolong food preservation during the defrosting phase.
- To defrost, unplug the appliance and remove the drawers. Leave the door open to allow frost to melt. To prevent water from escaping during defrosting, it is advised that you place an absorbent cloth on the bottom of the freezer compartment and wring it out regularly.
- Clean the inside of the freezer compartment and dry it carefully.
- Turn the appliance back on and put the food back inside. To remove frost on the STOP FROST* accessory, follow the CLEANING instructions.
Ice Cubes
Fill 2/3 of the ice tray with water and put it back in the freezer compartment. Do not, under any circumstances, use sharp or pointed objects to remove the ice.
The quantity of fresh food that can be frozen in a specific time period is indicated on the rating plate. Load limits are determined by baskets, flaps, drawers, shelves, etc. Make sure that these components can still close easily after loading.
General Information
The drawers, baskets, and shelves should be kept in their current position unless otherwise specified in this quick guide. The light system inside the refrigerator compartment uses LED lights, allowing for better lighting than traditional light bulbs, as well as very low energy consumption.
Doors and lids of the refrigeration appliance should be removed before disposal in a landfill to avoid children or animals getting trapped inside.
Troubleshooting
| What to do if... | Possible reasons | Solutions |
|---|---|---|
| The control panel is switched off, the appliance does not work. | The appliance may be in On/Stand-by mode. There may be an appliance power supply problem. | Turn the appliance on by pressing the [On/Stand-by button]. Check that:
|
| The inside light does not work. | The light may need to be replaced. | For models with LED lights: contact the authorised Technical Assistance Service. |
| The temperature inside the compartments is not low enough. | The appliance may be in On/Stand-by mode. There could be various causes (see "Solutions"). | Turn the appliance on by pressing the [On/Stand-by button]. Check that:
|
| There is water on the bottom of the refrigerator compartment. | The defrost water drain is blocked. | Clean the defrosting water drain (see section "Cleaning and Maintenance"). |
| The front edge of the appliance, at the door striker seal, is hot. | This is not a defect. It prevents condensation from forming. | No solution is necessary. |
| The red icon is flashing and a sound signal is activated. | Door open alarm. It is activated when the refrigerator and/or freezer compartment door remains open for a prolonged period of time. | To turn the sound signal off, close the open door of the product. |
| The red icon is flashing, a sound signal is activated, and the [Door icon] is activated. | Blackout alarm. This activates when there is a prolonged interruption to the power supply which has caused an increase in temperature in the freezer compartment. Note: Until the blackout alarm is deactivated, you cannot set a different temperature for the product. | Before turning off the sound signal, it is recommended that you pay attention to the temperature shown on the temperature display, corresponding to the highest temperature reached in the freezer compartment during the power cut. To turn the sound signal off, briefly press the "Turn off sound alarm" button. After pressing the button, the temperature display will again show the temperature set. If the freezer compartment has not yet reached the optimal temperature for food preservation, the freezer compartment temperature alarm may activate (see freezer compartment temperature alarm). Check the condition of the food before consuming it. |
| The red icon is lit up (without flashing), a sound signal is activated, and the freezer temperature display is flashing. | Freezer compartment temperature alarm. The freezer compartment temperature alarm indicates that the compartment is not at the optimum temperature. This may occur: when using for the first time, after defrosting and/or cleaning, when freezing large quantities of food, or when the door to the freezer does not close completely. | To turn off the sound signal, briefly press the "Turn off sound alarm" button (the temperature display will stop flashing). When optimum temperature conditions have been reached, the red icon will automatically turn off. If the freezer compartment temperature alarm continues, contact the Authorised Technical Assistance Service. |
| The red icon will light up, a sound signal is activated, and the letter "F" is flashing on the display. | Malfunction alarm. The alarm indicates the malfunction of a technical component. | Call the authorised Technical Assistance Service. To turn the sound signal off, briefly press the "Turn off sound alarm" button. |
* Available only on certain models
Additional Information
Note: If the chiller declaration is present in the rating plate (see image below), the declaration applies only to standard EN 62552:2013 valid until February 28th, 2021.
Policies, standard documentation, and additional product information can be found by:
- Visiting our website: docs.whirlpool.eu
- Using QR Code (QR codes are excluded from this HTML output).
- Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales Service, please state the codes provided on your product's identification plate.
The model information can be retrieved using the QR-Code indicated on the energy label. The label also includes the model identifier that can be used to consult the https://eprel.ec.europa.eu database portal.
Model Number: 400011424884
