Whirlpool Refrigerator Quick Guide
Thank you for purchasing a Whirlpool product. For assistance, please register your product at www.whirlpool.eu/register.
Before using the appliance, carefully read the Safety Instructions.
Product Description
First Time Use
Wait at least two hours after installation before connecting the appliance to the power supply. Once connected, it starts automatically. The factory-set ideal storage temperatures are pre-programmed.
After turning the appliance on, allow 4-6 hours for the correct storage temperature to be reached in a normally filled appliance. Position the antibacterial anti-odour filter in the fan as per the filter packaging instructions (if available). If an audible signal sounds, it indicates a temperature alarm; press the button to switch off the acoustic alarms.
Control Panel
The control panel features the following indicators and controls:
- 1. Temperature Display: Shows the refrigerator compartment temperature.
- 2. Door Open Indicator: Alerts if the door is left open.
- 3. Turning Off Sound Alarm: Button to silence acoustic alarms.
- 4. Fast Cool: Activates rapid cooling function.
- 5. Temperature Button: Adjusts the refrigerator temperature.
- 6. Vacation Mode: For use during prolonged absences.
- 7. On/Stand-by: Powers the appliance on or puts it into standby mode.
The control panel is typically located at the top of the refrigerator compartment.
Key Features
6th Sense Fresh Control and Freeze Control
This feature automatically ensures the appliance quickly reaches and maintains the optimal internal preservation temperature for food.
Fan
The fan improves temperature distribution within the refrigerator compartment, enhancing food preservation. It operates based on temperature and/or humidity levels. If equipped, it may include an antibacterial filter. The fan restarts automatically after a power cut or appliance turn-off. Ensure the air intake area is not obstructed by food items.
Antibacterial Filter
This filter helps maintain hygiene. Remove it from its packaging (often found in the Fruit and Vegetable drawer) and insert it into the fan cover. Replacement instructions are usually included with the filter. * Available only on certain models.
On/Stand-by Function
To put the appliance in standby, press and hold the On/Stand-by button. All indicators turn off except the standby indicator. In standby mode, the internal light does not turn on. Press the button again to reactivate the appliance. Note: this does not disconnect the appliance from the power supply.
Temperature Display
This display shows the refrigerator compartment temperature, typically ranging from +2°C to +8°C. For optimal food preservation and to avoid waste, refer to recommended settings and storage times in the full user manual.
Fridge Compartment Temperature Adjustment
Press the Fridge button to adjust the temperature. The range is typically +2°C to +8°C. The recommended setting for the refrigerator compartment is +4°C.
Fast Cool Function (Fast Cooling)
To quickly cool the refrigerator compartment, or 6 hours before storing a large quantity of food, activate the "Fast Cooling" function. Press the button repeatedly until the relevant icons flash green and then remain constant. The function automatically turns off after a set period (e.g., 30 hours for models with a freezer, 6 hours for models without). To manually turn it off, press the button again. Avoid direct contact between fresh and already frozen food during this mode.
Turning Off the Sound Alarm
Briefly press the designated button (often marked with a bell icon or similar) to turn off any activated sound alarms.
Vacation Mode
This function is ideal for prolonged absences. Press and hold the Vacation button for 3 seconds to engage. The display will show a higher temperature (e.g., +12°C) and the Vacation mode icon will light up. Remove all food from the refrigerator compartment and keep doors closed. The appliance will maintain a temperature suitable for preventing odours. Remember to remove food from the freezer compartment as well. A deep clean before activating this mode is recommended. Press and hold the button for 3 seconds again to deactivate. Changing the setpoint also deactivates Vacation Mode.
How to Store Food and Beverage
The refrigerator is divided into zones for optimal food storage:
Storage Zones Legend
- Temperate Zone: Suggested for tropical fruit, cans, drinks, eggs, sauces, pickles, butter, jam.
- Cool Zone: Suggested for cheese, milk, daily food, delicatessen, yoghurt.
- Coolest Area: Suggested for cold cuts, desserts, meat, and fish.
- Fruit & Vegetable Drawer: Specifically designed for fruits and vegetables.
Fresh Box 0°
This drawer is designed to maintain a low temperature (between +3°C and -2°C) to preserve fresh food for longer. Suitable for items like fresh pasta, sour cream, pesto/salsa, homemade preparations, pastry cream, pudding, cream cheese, cold cuts, desserts, meat, and fish. Vacation mode should not be selected for this drawer to function correctly. * Available only on certain models.
Humidity Control
In the Fruit & Vegetable drawer, a selector allows you to adjust the humidity level for optimal preservation of stored produce. Slide the selector to achieve the right balance for the food you store.
Light System
The internal lighting uses LED technology, providing better illumination with very low energy consumption. Different models may feature various configurations of LED lights (e.g., top light, lateral lights), with energy efficiency classes ranging from F to G.
General Information
Drawers, baskets, and shelves should generally be kept in their original positions unless otherwise specified.
Disposal: Before disposing of the appliance, remove doors and lids to prevent children or animals from getting trapped inside.
Removing Drawers
Pull drawers outwards until they stop, then lift them up and remove them. The freezer compartment can be used without drawers to gain more volume. Ensure the door is closed properly after returning food to shelves.
Troubleshooting
Refer to the table below for common issues and their solutions.
| What to do if... | Possible Reasons | Solutions |
|---|---|---|
| The control panel is switched off, the appliance does not work. | The appliance may be in On/Stand-by mode. There may be an appliance power supply problem. |
Turn the appliance on by pressing the On/Stand-by button. Check: power outage, plug insertion, mains switch position, electrical system protection devices, and power cable condition. |
| The inside light does not work. | The light may need to be replaced. | For models with LED lights, contact the authorised Technical Assistance Service. |
| The temperature inside the compartments is not low enough. | The appliance may be in On/Stand-by mode. There could be various causes. |
Turn the appliance on by briefly pressing the On/Stand-by button. Check: doors close properly, appliance not near heat source, set temperature is adequate, air circulation is not obstructed. |
| There is water on the bottom of the refrigerator compartment. | The defrost water drain is blocked. | Clean the defrosting water drain (refer to "Cleaning and Maintenance" section in the full manual). |
| The front edge of the appliance, at the door striker seal, is hot. | This is not a defect. It prevents condensation from forming. | No solution is necessary. |
| Door open alarm indicator and Alarm indicators blink, the acoustical alarm is activated. | Door open alarm: The fridge door remained open for more than 2 minutes. | Close the door or press the Stop Alarm button to mute the acoustical alarm. |
| The freezer temperature display blinks, the acoustical alarm is activated, and the Alarm Indicator blinks. | Blackout alarm: Inside the Freezer the temperature is not adequate. | Press the Stop Alarm button to stop the acoustical alarm. The freezer temperature display will continue blinking, and the Alarm Indicator will remain on until the adequate temperature is restored. |
| The icon is lit up (without flashing), a sound signal is activated, and the freezer temperature display is flashing. | Freezer compartment temperature alarm: The compartment is not at the optimum temperature. This may occur: during first use, after defrosting/cleaning, when freezing large quantities of food, or if the freezer door does not close completely. | To turn off the sound signal, briefly press the "Turn off sound alarm" button. The temperature display will stop flashing. The red icon will automatically turn off when optimum temperatures are reached. If the alarm persists, contact Authorised Technical Assistance Service. |
| The Party Mode and Alarm Indicators blink, the acoustical alarm is activated. | 30 seconds elapsed since Party Mode function was activated. It is time to take out the bottle from the freezer. | Press the Stop Alarm button to cancel the alarm. |
* Available only on certain models.
Further Information and Support
Policies, standard documentation, ordering of spare parts, and additional product information can be found by:
- Visiting the website: docs.whirlpool.eu and parts-selfservice.whirlpool.com
- Using the QR Code (refer to product documentation).
- Contacting After-sales Service (phone number in the warranty booklet). When contacting, state the codes from your product's identification plate.
Model information can be retrieved using the QR-Code on the energy label, which also includes an identifier for the ePREL database portal.
