Introduction to the CATEYE CC-CL200
The CATEYE CC-CL200 is a wireless cyclocomputer designed to provide cyclists with essential performance data. This manual guides users through the installation, setup, operation, and maintenance of the device, ensuring accurate tracking of speed, distance, and time during rides.
Key Features and Functions
This advanced cyclocomputer offers a range of features to enhance the cycling experience:
- Speed Tracking: Displays current, average, and maximum speed.
- Distance Measurement: Records both trip distance and total accumulated distance.
- Elapsed Time: Tracks the duration of rides.
- 24-Hour Clock: Keeps track of the current time.
- Dual Wheel Circumference Memory: Allows for use on two different bicycles or with different wheel setups.
- Automatic Start/Stop: The Auto Mode function can automatically start and stop measurements based on wheel movement, reducing the need for manual button presses.
- Power Saving: The unit enters a sleep mode after a period of inactivity to conserve battery life.
Installation and Setup
Proper installation is crucial for accurate data. The manual details how to mount the main unit on the handlebar and the sensor and magnet on the front fork and wheel spoke, respectively. Key setup steps include:
- Measuring and setting the correct wheel circumference for accurate speed and distance readings.
- Selecting the preferred speed scale (km/h or mph).
- Setting the 24-hour clock.
Operating the Cyclocomputer
The CC-CL200 features four buttons for operation:
- Mode Button: Cycles through different data displays (speed, distance, time, etc.).
- Start/Stop Button: Manually starts and stops ride measurements (unless Auto Mode is active).
- Set Button: Used for setting wheel circumference, clock time, and auto mode preferences.
- AC (All Clear) Button: Resets all stored data, requiring re-setup.
Maintenance and Troubleshooting
The manual provides guidance on battery replacement (CR2032 lithium batteries for both main unit and sensor) and common troubleshooting steps. Issues such as no display, incorrect data, or sensor signal problems are addressed, often resolved by checking sensor alignment, battery status, or performing an 'All Clear' operation.
Specifications
The CATEYE CC-CL200 is powered by CR2032 lithium batteries, with an estimated battery life of approximately 2 years for the main unit and 1,000 miles for the sensor. It supports wheel circumferences from 10 mm to 2,999 mm.
Service Information
For warranty service or inquiries, CATEYE Co., Ltd. provides contact information for their service centers in Japan and the United States.
