Devolo Magic LAN Adapter Installation Guide

Part A: Installation via App

Download the devolo Home Network app. An installation wizard will guide you through the configuration step-by-step. If you prefer to perform the installation without the app, follow the steps in Part B.
▶️ Download the devolo Home Network app

Part B: Manual Installation

Step B1: Connect the Adapter

Connect the devolo Magic LAN adapter to a free wall socket. Wait until the LED quickly flashes white (approximately 15 seconds).
Visual Description: A devolo Magic LAN adapter is shown plugged into a wall socket. The LED indicator on the adapter is flashing white.

Step B2: Initiate Pairing

Within 3 minutes, press the button on the side of your devolo Magic LAN adapter that is connected to the router.
Visual Description: A finger is pressing the button on the side of the devolo Magic LAN adapter connected to a router. The LED indicator is flashing white.

Step B3: Encryption Process

The encryption process occurs automatically. During this time, the LEDs of both adapters flash white.
Visual Description: Two devolo Magic LAN adapters are shown, both with their LED indicators flashing white, indicating the encryption process.

Step B4: Completion

The process is complete when all LEDs on the devices light up solid white. This process takes a maximum of 3 minutes.
Visual Description: Two devolo Magic LAN adapters are shown, both with their LED indicators lit solid white, indicating successful pairing and operation.

Understanding LED Indicators and PLC Button

The PLC button on the devolo Magic LAN adapter controls pairing and factory resets.

LED Behavior Descriptions:

• Lights up white: The devolo Magic LAN adapter is working perfectly and is connected to other devolo Magic adapters.
• Quickly flashes white: The adapter is currently establishing a pairing connection with another adapter.
• Flashes red: The adapter has a poor Powerline connection.
• Slowly flashes white: The adapter is in standby mode.
• Alternately flashes white and red: The adapter is currently undergoing a software update.
• Lights up white and then briefly flashes red: The adapter is currently in the start-up process.
• Lights up red: The adapter cannot see any other devolo Magic adapters or has a connection issue.
• None (LED off): The adapter has no LED function because it was disabled by the user.

Help: Manual Pairing

If automatic pairing during initial installation was unsuccessful, you can perform manual pairing of the Magic adapters.

Manual Pairing Steps:

1. Connect the devolo Magic LAN adapter to a free wall socket and wait until the LED flashes white (approximately 15 seconds).
2. Within 3 minutes, press the button on the side of your devolo Magic LAN adapter that is connected to the router.
3. Next, press the button on your new Magic LAN adapter.
4. Pairing is completed successfully as soon as all LEDs on both adapters light up solid white.

Visual Description: Step 1 shows an adapter connected to a socket with a flashing white LED. Step 2 shows pressing the button on the router-connected adapter. Step 3 shows pressing the button on the new adapter. The final state shows both adapters with solid white LEDs.

Support and Downloads

For support and to download the latest manuals and software, please visit the devolo support pages:

• Germany: www.devolo.de/service
• Austria: www.devolo.at/service
• Switzerland: www.devolo.ch/service (also for French/Italian)
• Great Britain: www.devolo.co.uk/service
• France: www.devolo.fr/support
• Italy: www.devolo.it/supporto
• Spain: www.devolo.es/servicios
• Portugal: www.devolo.pt/suporte
• Netherlands: www.devolo.nl/service
• Belgium: www.devolo.be/service (also for French/Dutch)
• Sweden: www.devolo.se/support
• Greece: www.devolo.gr/ypostirixi
• Global: www.devolo.global/support

You can find additional manuals and software downloads at: www.devolo.global/support/downloads