STIHL TrimCut™ 30-2 Dual Line Cutting Head

Product Overview, Safety, and Installation Guide

Product Identification

Model: STIHL TrimCut™ 30-2

Compatible with STIHL Trimmers and Brushcutters: FS 44, 55, 80, 83, 85, 90, 100, 100 RX, 110, 120, 130, 200, 250, 310, KM 55, 85, 90, 110, 130.

Type: Manual feed, dual line cutting head.

Applications: Designed for lawn trimming and mowing large areas of heavy grass and weeds. Maximum recommended speed: 10,000 r.p.m.

Part Number: 4002 710 2193

Related Deflector Kits (Examples):

Deflector Kit for FS 44, 55, 80, 83, 85, 90, 100, 110, 120, 130, 200, 250, 310, KM 55, 85, 90, 110, 130: Part Number 4119 710 6000 / 4119 716 3200 / 4119 713 4500
Deflector Kit for FS 100 RX: Part Number 4180 710 8100

Key Features

Split spool with notch: Reduces line welding, allowing for quick line reloading.
Captured spring: Ensures no loose parts, preventing loss during respooling.

Safety Precautions

⚠️ General Safety: Always follow all safety precautions in the owner's manual. Improper use can cause serious or fatal injury.

⚠️ Object Projection: Objects may be thrown or ricochet in all directions. To reduce the risk of injury to the operator, never operate a trimmer without a properly mounted deflector. Keep bystanders at least 50 ft (15 m) away.

⚠️ Personal Protective Equipment (PPE): To reduce the risk of eye injury, always wear safety goggles that meet ANSI Z87.1. STIHL recommends wearing a face shield or face screen over goggles for facial protection. Always wear hearing protection to reduce the risk of hearing loss.

⚠️ Tool Condition: To reduce the risk of injury from broken parts, check the condition of the trimmer head at regular intervals. Do not continue using broken or damaged tools.

ℹ️ Important Information: Improper use of any power tool may cause serious or fatal injury. Read, understand, and carefully follow the operating and safety instructions in your owner's manual before using these products.

Installation and Line Loading

To lock the cutting head for maintenance: Insert a metal pin (not shown) into the hole near the top of the gearbox. Gently turn the head until it locks securely into place.

Line Specifications:

Line Diameter (A): 2.4 mm (0.095 inches)

Line Length (B): 5 m (16.5 feet)

Step-by-Step Line Loading and Assembly:

Preparation: Ensure the cutting head is secured using the locking pin.
Spool Insertion: Place the dual-line spool into the cutting head housing. The spool has a notch for alignment.
Line Feeding: Feed the trimmer line through the eyelets on the cutting head housing.
Line Winding: Wind the line evenly onto the spool in the direction indicated by the spool's notches or arrows. Ensure the line ends are accessible.
Securing the Line: Place the ends of the trimmer line into the notches or retaining slots on the outer edge of the spool to prevent unwinding.
Reassembly: Place the top cover over the spool and line. Secure the cover, likely with a screw or retaining clip.
Final Check: Verify that the line is properly loaded and the head is reassembled correctly. Trim any excess line to the desired length.

Note: The diagrams on page 2 visually illustrate these steps. Diagram 4 shows line specifications. Diagrams 8-13 detail the line winding and assembly process.

	STIHL AUTOCUT C 25-2 EasySpool Mowing Head Instructions Instructions for fitting and using the STIHL AUTOCUT C 25-2 EasySpool mowing head on various STIHL trimmer and brushcutter models. Includes compatibility, key features, and essential safety precautions.
	STIHL Grass Trimmer Head and Blade Compatibility Chart A comprehensive guide to STIHL grass trimmer heads, including AutoCut, DuroCut, FixCut, and SuperCut models, detailing their part numbers, trimmer line diameters, and compatibility with various STIHL trimmer models like FSA, FSE, and FS series.
	STIHL PolyCut™ 41-3 Cutting Head: Installation, Safety, and Maintenance Guide Learn how to install, use, and maintain the STIHL PolyCut™ 41-3 cutting head for your brushcutter or clearing saw. Includes safety instructions, conversion to nylon line, and wear indicator information.
	STIHL Trimmer and Brushcutter Cutting Heads and Blades Guide Explore the versatility of STIHL power products with a comprehensive guide to cutting heads and blades. Learn about different cutting attachments for various tasks, from trimming grass to clearing brush and small trees. Includes information on line diameters, color-coding, and selection charts for STIHL trimmers and brushcutters.
	STIHL FS 55 Brushcutter Instruction Manual This manual provides comprehensive instructions for the safe operation, maintenance, and troubleshooting of the STIHL FS 55 brushcutter. It covers safety precautions, assembly, starting and stopping procedures, maintenance schedules, and technical specifications.
	STIHL FS 55 Trimmer/Brushcutter: Instruction Manual Comprehensive instruction manual for the STIHL FS 55 trimmer and brushcutter, detailing safety, operation, maintenance, and specifications for optimal and safe use of STIHL garden equipment.
	STIHL FS 55 Brush Cutter: User Manual and Operating Guide This comprehensive user manual provides essential safety precautions, operating guidelines, maintenance procedures, and technical specifications for the STIHL FS 55 series brush cutters. Learn how to properly use, care for, and maintain your STIHL FS 55 for optimal performance and safety.
	STIHL TrimCut™ 41-2 Dual Line Cutting Head - Installation and Safety Guide Comprehensive guide for the STIHL TrimCut™ 41-2 dual line cutting head, compatible with FS 350 and FS 450 trimmers and brushcutters. Includes detailed instructions on line loading, safety precautions, and product features.