Victrola VSC-500SB The Journey+ Instruction Manual

Safety Instructions

1. Read and retain all safety and operating instructions before use.
2. Heed all warnings on the appliance and in the instructions.
3. Follow all operating and use instructions.
4. Do not use near water or moisture (e.g., wet basement, swimming pool).
5. Clean only with a dry cloth.
6. Ensure at least 5 cm ventilation around the apparatus; do not block openings.
7. Do not install near heat sources (radiators, stoves, amplifiers).
8. Do not defeat the purpose of polarized or grounding plugs. Consult an electrician if the plug does not fit your outlet.
9. Protect the power cord from being walked on or pinched.
10. Use only manufacturer-specified attachments/accessories.
11. Use only with specified carts, stands, tripods, brackets, or tables. Exercise caution when moving combinations to prevent tip-overs.
12. Unplug during lightning storms or long periods of non-use.
13. Refer all servicing to qualified personnel for damage (cord, plug, liquid spills, dropped items, exposure to rain/moisture, abnormal operation).
14. Keep the unit in a well-ventilated environment.
15. To reduce fire/electric shock risk, do not expose to rain or moisture. No naked flames (like candles) on the apparatus.
16. The main plug serves as the disconnect device and must remain operable.
17. This product is for household use only, not commercial.
18. This equipment is Class II or double insulated and does not require a safety connection to electrical earth.
19. [Electric Shock Hazard Warning]: The lightning flash symbol indicates uninsulated "dangerous voltage" within the enclosure.
20. [Caution Warning]: The exclamation point symbol indicates important operating and maintenance instructions.
21. Warning: Do not expose to rain or moisture. No naked flames on the apparatus.
22. Caution: Unauthorized modifications may void user authority to operate.

Specifications

AC/DC Adaptor:

Input: 100-240V, 50/60Hz, 0.2 Max

Output: 5V 1A

Power: 5W

Speaker Impedance:

4 ohm, 3W

Max Power Consumption:

5W

Included:

Turntable, Instruction Manual, Turntable Operation Sheet, 5V/1A Switching Power Supply, 45 RPM adaptor, Replacement Turntable Needle, Vinyl Record Cleaning Cloth

Design and specifications are subject to change without notice. Bluetooth is a registered trademark of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners.

Turntable Layout

The turntable has several components labeled with numbers:

• 1. Turntable Platter
• 2. Turntable Shaft
• 3. 45 RPM Adaptor
• 4. Lift Lever
• 5. Tone Arm Clip
• 6. Line-In Jack
• 7. Auto and Manual Stop Selection Switch
• 8. Function Knob (BT, Line-In, Phono, BT Out)
• 9. Speed Selection Switch
• 10. Tone Arm
• 11. Power On/Off and Volume Control Knob
• 12. Power/Bluetooth Light Indicator
• 13. Stylus Cartridge
• 14. Headphone Jack
• 15. Buckle (for lid)
• 16. Handle
• 17. Speakers
• 18. RCA Output Jack
• 19. Power Adaptor Jack

Diagrams illustrate the placement of these components on the unit.

Turntable Operation

Power Supply

Insert the adaptor plug into the DC IN jack on the rear of the unit. Connect the AC/DC adaptor (5V/1A, 100-240V, 50-60Hz) to a wall outlet.

Basic Operation

1. Lift the buckle on the front and open the lid.
2. Turn the FUNCTION knob to PHONO. Turn the VOLUME CONTROL knob clockwise to power ON the unit. The red LED indicates the unit is ON.
3. Place a record on the turntable platter and select the speed (33 1/3, 45, or 78 RPM) using the SPEED SELECTION SWITCH. For 45 RPM records, use the included 45 RPM adaptor.
4. Open the TONE ARM CLIP. Push the LIFT LEVER backwards to raise the arm. Gently move the tone arm to the desired position over the record. The turntable will start spinning when the arm moves towards the record. Push the lift lever forward and slowly lower the arm onto the record to begin playback.
5. Note: The turntable only starts spinning when the tone arm is over the record if the Auto Stop is ON.
6. If the AUTO AND MANUAL STOP SELECTION SWITCH is ON, the record stops automatically. If OFF, it will not stop automatically.
7. Turn the VOLUME CONTROL knob to adjust the volume level.

How to Replace the Turntable Needle

Replacement Needle # ITNP-S1

Removing the Stylus:

1. Place a screwdriver at the tip of the stylus and push down in direction "A". Warning: Applying excessive force may damage or break the stylus.
2. Pull the stylus out in direction "B".

Installing the Stylus:

1. Hold the tip of the stylus and insert the other edge by pressing in direction "C".
2. Push the stylus up in direction "D" until it locks into place.

Caution:

• Do not remove or bend the stylus needle.
• Do not touch the needle to avoid injury.
• Turn off the unit's power before replacing the stylus.
• Keep out of reach of children.

Note: The stylus typically lasts about 50 hours. Replace it when sound quality changes.

Bluetooth Out Operation

This feature allows connection to external Bluetooth-compatible headphones or speakers (not included).

1. Power ON the unit by turning the VOLUME CONTROL knob clockwise.
2. Turn the FUNCTION knob to BT OUT. The red LED will flash.
3. Turn ON your external Bluetooth receiver device (headphones/speakers) and set it to pairing mode.
4. Pairing may take 15-30 seconds. A chime will sound, and the red LED will stop flashing when complete.
5. You are now connected to your external Bluetooth device.
6. Place a vinyl record on the turntable. Move the tone arm to the desired playing position. Sound will play from the external Bluetooth speaker. Volume is adjusted on the external device only.

• Pairing Tip: Keep the Bluetooth device within 1m (3.3') for optimal pairing.
• The product stays in pairing mode for 30 seconds. If pairing fails, turn off all devices and restart the process.
• "BT OUT" only works with vinyl playback; it does not function with AUX or regular Bluetooth modes.

Bluetooth Operation

Connect an external device with Bluetooth to the turntable.

1. Power ON the unit by turning the VOLUME CONTROL knob clockwise.
2. Turn the FUNCTION knob to BT (Bluetooth®). The blue LED will flash.
3. On your external device, turn ON Bluetooth settings. Look for "Victrola Journey +" and select it to connect. The blue LED will stop flashing once connected.
4. You are now connected via Bluetooth.
5. Turn the VOLUME CONTROL knob to adjust the sound level.

Aux-In Operation

Connect an external audio source (CD/MP3 player, mobile phone, computer) via the LINE-IN JACK.

1. Plug an Aux Cable (not provided) into the LINE-IN socket on the unit.
2. Turn the FUNCTION knob to LINE-IN. The LED will turn purple.
3. Plug the other end of the Aux Cable into the headphone or line-out socket of your external source.
4. Power ON the unit by turning the VOLUME CONTROL knob clockwise.
5. Turn the VOLUME CONTROL knob to adjust the sound level.

Headphone Operation

Plug headphones into the headphone jack on the function panel to listen to the record. The built-in speakers will mute when headphones are plugged in.

Note: For best performance and maintenance, unplug the turntable when not in use.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the responsible party could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with Class B digital device limits per FCC Part 15, designed for reasonable protection against harmful interference in residential installations. It generates, uses, and can radiate RF energy. If not installed/used per instructions, it may cause radio communication interference. No guarantee against interference in specific installations. If interference occurs, try measures like reorienting/relocating the antenna, increasing separation, connecting to a different circuit, or consulting a dealer/technician.

California Prop 65 Warning

WARNING: This product can expose you to chemicals, including lead, known to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

IC Warning

This device contains license-exempt transmitter(s)/receiver(s) complying with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to two conditions: (1) it may not cause interference, and (2) it must accept any interference, including interference that may cause undesired operation.

This equipment complies with FCC and IC radiation exposure limits for an uncontrolled environment. Install and operate with at least 20cm distance between the radiator and your body.

Warranty

Victrola is a registered trademark of Innovative Technology Electronics LLC.

Limited Warranty: 90 Days Labor, One Year Parts

Innovative Technology Electronics LLC. (IT) warrants the product against "Defects" in materials under normal use for "One Year" from the original purchase date. The warranty is non-transferable.

Within the initial "90 Day" period, IT will repair or replace defective products at no charge. For a total period of "One Year" from the original purchase date, IT will cover the cost to repair or replace damaged "Parts" only.

The warranty does not cover:

• Cosmetic damage
• Antennas, AC cords, cabinets, headbands, ear-pads
• Damage due to line power surges, improper voltage supply/settings, misuse, mishandling, accident, acts of God
• Attempted repair by unauthorized service agents

To Obtain Service:

Purchasers must present an original sales receipt/proof of purchase. Contact www.victrola.com to request an RMA (Return Material Authorization) number. Returns without an RMA number will be refused. Upon inspection, IT may issue a replacement of equivalent value and features.

To return an item, supply:

• Full name
• Return address
• Phone number
• Item purchased
• Receipt of purchase
• Reason for return

Returns must be in original or suitable packaging. Include full name, shipping address, and telephone number inside the package. No returns to PO Boxes or APO addresses.

Include payment for handling and return shipping charges:

• USD $5.00 for items $10.00 - $39.99 (Price Paid Per Unit)
• USD $10.00 for items $40.00 - $99.99 (Price Paid Per Unit)
• USD $16.00 for items $100.00 and up (Price Paid Per Unit)
• Shipping fees are non-refundable.

IT is not responsible for delays due to incomplete information. Send inquiries or RMA requests via www.victrola.com/pages/technical-support.

Contact Information:

Innovative Technology Electronics LLC.
1 Channel Drive
Port Washington, NY 11050
Toll free: 1-877-483-2497
Website: www.victrola.com/pages/technical-support

There are no express warranties except as listed. Repair or replacement is the exclusive remedy. IT is not liable for incidental or consequential damages, except as prohibited by law. Implied warranties of merchantability or fitness are limited to the warranty duration.

Some states may have different limitations on damages or implied warranty duration.

Made In China.