Victrola VSC-400SB The Journey+ Turntable

This instruction manual provides detailed information for operating the Victrola VSC-400SB The Journey+ turntable.

Safety Instructions

• Read and keep these instructions for future reference.
• Heed all warnings and follow all operating instructions.
• Do not use near water or moisture.
• Clean only with a dry cloth.
• Ensure adequate ventilation (at least 5 cm around).
• Do not install near heat sources.
• Do not defeat the purpose of polarized or grounding plugs. Consult an electrician if the plug does not fit your outlet.
• Protect the power cord from damage.
• Use only manufacturer-specified attachments/accessories.
• Use caution when moving the unit on carts or stands to prevent tip-overs.
• Unplug during lightning storms or long periods of disuse.
• Refer servicing to qualified personnel.
• Keep the unit in a well-ventilated environment.
• Do not expose to rain or moisture; avoid placing liquid-filled objects on the unit.
• The main plug serves as the disconnect device and must remain operable.
• This product is for household use only.
• This equipment is Class II or double insulated and does not require an earth connection.
• [electric-shock-warning] symbol indicates the presence of uninsulated dangerous voltage.
• [caution-symbol] symbol indicates important operating and maintenance instructions.
• Warning: Do not expose to rain or moisture. No naked flames like candles on top.
• Caution: Unauthorized modifications may void user authority.

Specifications

Design and specifications are subject to change without notice. Bluetooth is a registered trademark of Bluetooth SIG, Inc.

Turntable Layout

The turntable features the following components:

• 1. Turntable Platter
• 2. Turntable Shaft
• 3. 45 RPM Adaptor
• 4. Lift Lever
• 5. Tone Arm Clip
• 6. Line-In Jack
• 7. Auto and Manual Stop Selection Switch
• 8. Function Knob (BT, Line-In, Phono, BT Out)
• 9. Speed Selection Switch
• 10. Tone Arm
• 11. Power On/Off and Volume Control Knob
• 12. Power/Bluetooth Light Indicator
• 13. Stylus Cartridge
• 14. Headphone Jack
• 15. Buckle
• 16. Handle
• 17. Speakers
• 18. RCA Output Jack
• 19. Power Adaptor Jack

Turntable Operation

Power Supply

Connect the included AC/DC adaptor (5V/1A) to the DC IN jack on the rear of the unit and to a wall outlet.

Basic Operation

1. Lift the buckle and open the lid.
2. Turn the FUNCTION KNOB to PHONO. Turn the VOLUME CONTROL KNOB clockwise to power ON the unit (red LED will light).
3. Place a record on the TURNTABLE PLATTER and select the speed (33 1/3, 45, or 78 RPM) using the SPEED SELECTION SWITCH. Use the 45 RPM ADAPTOR for 45 RPM records.
4. Open the TONE ARM CLIP. Push the LIFT LEVER back to raise the arm. Move the tone arm to the desired position over the record. The turntable spins when the arm moves toward the record. Push the lift lever forward and lower the arm onto the record to play. The record spins when the tone arm is over it if Auto Stop is ON.
5. If the AUTO AND MANUAL STOP SELECTION SWITCH is ON, the record stops automatically. If OFF, it will not stop automatically.
6. Adjust volume using the VOLUME CONTROL KNOB.

How to Replace the Turntable Needle

Replacement Needle # ITNP-S1

Removing the Stylus

1. Insert a screwdriver at the tip of the stylus and push down [direction-A]. Warning: Applying excessive force may damage the stylus.
2. Pull the stylus out [direction-B].

Installing the Stylus

1. Hold the stylus tip and insert the other edge by pressing [direction-C].
2. Push the stylus up [direction-D] until it locks.

Caution: Do not bend the stylus. Do not touch the needle. Turn off power before replacement. Keep out of reach of children.

Note: The stylus lasts about 50 hours. Replace when sound quality degrades.

Bluetooth Out Operation

Connect to external Bluetooth headphones or speakers.

1. Power ON the unit.
2. Turn FUNCTION KNOB to BT OUT (red LED flashes).
3. Turn ON external Bluetooth receiver and set to pairing mode.
4. Pairing complete: hear chime, red LED stops flashing (approx. 15-30 seconds).
5. Connected to external Bluetooth device.
6. Play vinyl record; sound outputs to external Bluetooth speaker. Volume adjusted on external device.
7. Note: Keep Bluetooth device within 1m (3.3') for pairing. Pairing mode lasts 30 seconds. "BT OUT" only works with vinyl playback, not AUX or regular Bluetooth modes.

Bluetooth Operation

Connect an external device wirelessly using Bluetooth.

1. Power ON the unit.
2. Turn FUNCTION KNOB to BT (blue LED flashes).
3. Turn ON external device's Bluetooth. Look for "Victrola Journey +".
4. Select "Victrola Journey +" to connect. Blue LED stops flashing upon connection.
5. Connected via Bluetooth.
6. Adjust sound level with VOLUME CONTROL KNOB.

Aux-In Operation

Connect an external audio source (CD/MP3 player, phone, computer) via the LINE-IN JACK.

1. Plug an Aux Cable (not provided) into the LINE-IN socket.
2. Turn FUNCTION KNOB to LINE-IN (LED turns purple).
3. Plug the other end of the Aux Cable into the external source's headphone or line out socket.
4. Power ON the unit.
5. Adjust sound level with VOLUME CONTROL KNOB.

Headphone Operation

Plug earphones into the headphone jack. Built-in speakers will mute.

Note: Unplug the turntable when not in use for best performance and maintenance.

Compliance and Warnings

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) no harmful interference, and (2) acceptance of any received interference. Unauthorized modifications may void user authority. This equipment has been tested and found to comply with Class B digital device limits, providing reasonable protection against harmful interference in residential installations. If interference occurs, try reorienting the antenna, increasing separation, connecting to a different circuit, or consulting a dealer/technician.

California Prop 65 Warning

[warning-symbol] WARNING: This product may expose you to chemicals, including lead, known to cause cancer and birth defects or reproductive harm. For more information, visit www.P65Warnings.ca.gov.

IC Warning

This device complies with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to two conditions: (1) no interference, and (2) acceptance of any interference. Complies with FCC and IC radiation exposure limits for uncontrolled environments. Maintain at least 20cm distance between the radiator and your body.

Warranty Information

Victrola is a registered trademark of Innovative Technology Electronics LLC.

Limited Warranty: 90 Days Labor, One Year Parts

Innovative Technology Electronics LLC. (IT) warrants the product against defects in materials under normal use for one year from the original purchase date. Within the first 90 days, IT will repair or replace defective products at no charge. For the remainder of the year, IT will cover the cost of repairing or replacing damaged parts. The warranty does not cover cosmetic damage, antennas, cords, cabinets, ear-pads, or damage from power surges, improper voltage, misuse, mishandling, accidents, acts of God, or unauthorized repairs.

Obtaining Service

Purchasers must present an original sales receipt/proof of purchase. Request an RMA (Return Material Authorization) number via www.victrola.com. Returns without an RMA will be refused. IT may issue a replacement of equivalent value. To return an item, provide full name, return address, phone number, item purchased, proof of purchase, and reason for return for an RMA number.

Returns must be in original packaging or a suitable substitute. Include full name, shipping address, and telephone number inside the package. No returns to PO Boxes or APO addresses.

Return Shipping Fees

Include payment for handling and return shipping charges:

• USD $5.00 for items $10.00 - $39.99
• USD $10.00 for items $40.00 - $99.99
• USD $16.00 for items $100.00+
• Shipping fees are non-refundable.

IT is not responsible for delays due to incomplete information. Inquiries or RMA requests can be sent via www.victrola.com/pages/technical-support.

Innovative Technology Electronics LLC.
1 Channel Drive
Port Washington, NY 11050
Toll free: 1-877-483-2497
Website for support: www.victrola.com/pages/technical-support

No express warranties exist beyond those listed. Repair or replacement is the exclusive remedy. IT is not liable for incidental or consequential damages. Implied warranties of merchantability or fitness are limited to the duration of this warranty. State laws may provide additional rights.

Made In China.