Victrola Journey II VSC-600SB Instruction Manual

Overview

The Victrola Journey II (VSC-600SB) is a versatile record player with multiple playback options. The following components are identified:

• 1. Turntable Platter: The rotating surface where vinyl records are placed.
• 2. Turntable Spindle: The central post that secures the record.
• 3. 45 RPM Adapter: A small adapter for playing 45 RPM records with larger center holes.
• 4. Lift Lever: Used to raise and lower the tonearm gently onto the record.
• 5. Tonearm Clip: Secures the tonearm to its rest when not in use.
• 6. Line-In Jack: A 3.5mm auxiliary input port for connecting external audio devices.
• 7. Auto Stop Switch: A toggle switch to enable or disable the automatic stop feature at the end of a record.
• 8. Function Knob: Selects the desired playback mode: PHONO (Vinyl), BT OUT (Vinylstream/Bluetooth), or LINE IN (Aux-In).
• 9. Speed Selection Switch: Allows selection of the record playback speed: 33 1/3, 45, or 78 RPM.
• 10. Tonearm: The arm that holds the stylus and tracks the record grooves.
• 11. Power / Volume Knob: Controls the power to the unit and adjusts the audio volume.
• 12. LED Indicator: A light that indicates the operational status, such as Bluetooth pairing.
• 13. Stylus: The needle that makes contact with the record groove to produce sound.
• 14. Headphone Jack: A 3.5mm audio output port for connecting headphones.
• 15. RCA Output: Standard red and white audio output jacks for connecting to external amplifiers or speakers.
• 16. Power Adapter Input: The port where the included power adapter connects to the unit.

Initial Setup

To set up your Victrola Journey II:

1. Place the unit on a flat, level surface and open the buckle.
2. Remove all packing materials, including any twist ties securing the tonearm.
3. Gently pull the stylus cover forward to remove it.
4. Plug the included power adapter into the unit.
5. Rotate the power knob to turn the unit ON.

Vinyl Mode

To play vinyl records:

1. Ensure the unit is ON and the function knob is set to PHONO (Vinyl) mode.
2. Place a vinyl record onto the turntable platter.
3. Release the tonearm from its rest.
4. Use the lift lever to gently raise the tonearm.
5. Move the tonearm over the edge of the record.
6. Lower the lift lever to begin playback.
7. Use the Power/Volume knob to adjust the volume as needed.

Speed Selection

Use the Speed Selection Switch to choose the correct playback speed for your record (33 1/3, 45, or 78 RPM). Use the included 45 RPM adapter for 45 RPM records.

Auto Stop Selection

The Auto Stop Switch controls automatic stopping. If turned ON, the record will start spinning when the tonearm is moved over it and will stop automatically when playback finishes. If turned OFF, the record will spin continuously after playback is completed in PHONO mode.

RCA Line Out

Connect the red and white RCA connectors on the back of the unit to an amplifier or stereo device. Reduce the record player's volume to minimum before connecting, then increase volume as needed on the connected device.

Headphones

Connect your headphones or earbuds to the headphone jack. Reduce the record player's volume to minimum before connecting, then increase volume as needed.

Note: To avoid damaging vinyl grooves, only touch the center or edges of the record. If no sound is playing, ensure the function knob is set to Vinyl mode, not Vinylstream mode.

Vinylstream™ Mode (Bluetooth)

To play a vinyl record through an external Bluetooth speaker or headphones:

1. Turn the unit ON using the power knob.
2. Set the function knob to BT OUT (Vinylstream) mode. The LED indicator will flash blue, indicating the unit is searching for Bluetooth devices.
3. Turn on your external Bluetooth speaker or headphones and set them to pairing mode.
4. On your device, turn on Bluetooth and select “Victrola Journey II” from the list of available devices.
5. The unit will chime when successfully connected, and the LED indicator will stop flashing.
6. Use your external Bluetooth device to control the volume.

Notes:

• In Vinylstream mode, the unit's internal speakers are disengaged.
• For initial pairing, place the Bluetooth device within 1 meter (3.3 feet) of the Victrola.
• Ensure the unit is within 10 meters (33 feet) of your external device for a strong connection.
• If no sound is playing, ensure the function knob is set to Bluetooth mode.

Aux-In Operation

To play audio from an external device via a wired connection:

1. Connect your external audio device to the LINE IN jack (3.5mm) on the platter using a 3.5mm auxiliary cable (not included).
2. Turn the unit ON using the power knob.
3. Set the function knob to LINE IN (Aux-In) mode. The LED indicator will turn purple.
4. Use the Power/Volume knob to adjust the volume. Control other playback functions using the controls on your external audio device.

Stylus Replacement

The stylus should provide approximately 300 hours of normal use. Replace it when sound quality degrades.

Removing the Stylus

1. Place fingers at the tip of the stylus and push down towards direction “A”. WARNING: Applying excessive force may damage or break the cartridge.
2. Pull the stylus out towards direction “B”.

Installing the Stylus

Use replacement stylus # ITNP-S1.

1. Hold the tip of the new stylus and insert the other edge by pressing towards direction “C”.
2. Push the stylus upwards towards direction “D” until it locks securely in place.

Specifications

General

• Dimensions: 13.98" W x 5.28" H x 10.08" D (355mm W x 134mm H x 256mm D)
• Weight: 6.27 lbs / 2.84 kg

Power

• AC/DC Adaptor: Input: 100-240V, 50/60Hz, 0.5 A; Output: 5V 1.0A
• Speaker Impedance: 4 ohm
• Consumption: 5W

Turntable

• Type: Belt-Drive
• Drive Motor: DC motor
• Speeds: 33 1/3, 45, 78 RPM

Bluetooth

• Version: 5.4
• Supported Profiles: A2DP, AVRCP
• Operating Distance: 10 Meters (33 ft.)

Included: Turntable, Instruction manual, Power adapter, 45 RPM adapter.

Please note: Design and specifications are subject to change without notice due to continual improvements. Bluetooth is a registered trademark of Bluetooth SIG, Inc. Other trademarks are the property of their respective owners. Made in China. This product is manufactured and sold under the responsibility of Innovative Technology Electronics, LLC. Victrola is a trademark used under license by Innovative Technology Electronics, LLC.

Safety Warnings

Please read and follow all safety instructions:

• Read all instructions before operating the product. Retain instructions for future reference.
• Heed all warnings on the appliance and in the instructions.
• Do not use near water or moisture (e.g., wet basements, swimming pools).
• Clean only with a dry cloth.
• Ensure adequate ventilation (at least 5 cm around the apparatus). Do not block openings.
• Do not install near heat sources like radiators or stoves.
• Protect the power cord from being walked on or pinched.
• Use only manufacturer-specified attachments/accessories.
• Use caution if moving the unit on a cart or stand to prevent tip-over.
• Unplug during lightning storms or long periods of non-use.
• Refer servicing to qualified personnel if the apparatus is damaged (e.g., cord, plug, liquid spill, dropped).
• Keep the unit in a well-ventilated environment.
• Do not expose to dripping or splashing; do not place liquid-filled objects on the apparatus.
• The main plug serves as the disconnect device and must remain accessible.
• This product is for household use only, not for commercial use.

Symbols:

• ⚡ (Lightning bolt with arrowhead): Alerts users to uninsulated "dangerous voltage" within the enclosure that may pose an electric shock risk. Do not open.
• ❗ (Exclamation mark): Alerts users to important operating and maintenance instructions in the accompanying literature.

Warning: Do not expose to rain or moisture. Do not place open flames (like candles) on the unit. Changes or modifications not approved by the manufacturer may void the user's authority to operate the device and could result in hazardous exposure.

FCC & IC Warnings

FCC Statements:

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC rules and Innovation, Science and Economic Development Canada's license-exempt RSS standard(s). Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment causes harmful interference to radio or television reception, try to correct it by:

• Reorienting or relocating the receiving antenna.
• Increasing the separation between the equipment and receiver.
• Connecting the equipment to an outlet on a circuit different from the receiver's.
• Consulting a dealer or experienced radio/TV technician.

FCC & IC Radiation Exposure Statement:

This equipment complies with FCC and Canada radiation exposure limits for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating with any other antenna or transmitter.

(French translation of FCC/IC statements also present in the original document but merged into English for primary language output).

Limited Warranty & Customer Support

Victrola is a registered trademark of Innovative Technology Electronics, LLC.

United States: For detailed warranty policy and limitations, visit victrola.com/pages/warranty.

Outside the U.S., Canada, and US Territories: The warranty complies with applicable law. To obtain service, contact the dealer or distributor from whom the product was purchased, with your original receipt.

Canada and US Territories: The warranty complies with applicable law. To obtain service, contact the dealer or distributor from whom the product was purchased, with your original receipt. If assistance from the dealer is not possible, contact customer service for warranty assistance at victrola.com/contact.

Customer Support:

• Website: VICTROLA.COM/PAGES/CUSTOMER-CARE
• Email: support@victrola.com
• Phone: (877)483-2497