Thanks for your using of our company product, in order to ensure the product performance give full play to the role, please have a read of this manual to reduce unnecessary loss and damage, and get a further study of our product characteristic, installation and operation. Also please keep the manual for further reference.
I. Control Board Operation Instruction
Control Panel Diagram Description: The control panel features an indicator light for the top heating element, a thermostat for the top heating element, an indicator light for the bottom heating element, a thermostat for the bottom heating element, a timer, a power switch, and a switch for the internal lighting.
1. Operating Instruction of the PEKG20 Control Board:
- The left switch controls the internal lighting.
- The right switch controls all heating elements. Turn it on to enable the thermostats. Indicator lights turn off when the heating elements reach the set temperature. If the power switch is "On", the timer will not function. To use the timing function, first turn off the power switch; the timer then acts as a "power switch".
- Two thermostats separately control the top and bottom heating elements and their respective indicator lights.
II. Functions
1. Functions:
- Heating Up Quickly: Equipped with a 350°C thermostat, greatly saving cooking time.
- Baking Stone: Features a baking stone that ensures food is heated more evenly.
- Adjustable Thermostats: Two thermostats independently control the top and bottom heating elements, allowing for precise temperature adjustment of each.
2. Application:
- Suitable for baking fresh and frozen bread and flour products.
- Suitable for baking fresh and frozen meat.
III. Machine Illustration Diagram
Appearance: The document includes an illustration of the overall appearance of the pizza oven.
Case Components: The exploded view of the case shows components labeled 1 through 16, including a door, switches, indicator lights, thermostats, front frame, bottom rail, left clevis, top clevis, right clevis, left vertical board, top rail, machine control board, chamber, baking stone, heating element, left layer board, up strip for heating element, right layer board 1, right layer board 2, main panel of the chamber, cover board of the chamber, fixed plate for pyrocotton, lamp shade, bottom fixed plate for pyrocotton, top fixed plate for pyrocotton, Durothermic lamp, binding post, side board, rubber feet, shell, layer board for the chamber, and PG13.5 cable gland.
Front Panel Components: The illustration of the front panel shows components labeled 5.1 through 5.7, including bottom rail, left clevis, top clevis, right clevis, left vertical board, top rail, and machine control board.
Chamber Components: The illustration of the chamber shows components labeled 6.1 through 6.10, including baking stone, heating element, left layer board, up strip for heating element, right layer board 1, right layer board 2, main panel of the chamber, cover board of the chamber, fixed plate for pyrocotton, and lamp shade.
IV. Parts List
| No. | Part No. | Description | QTY |
|---|---|---|---|
| 1 | PEKG20-001 | Door | 1 |
| 2 | PEKG20-002 | Double row switch | 1 |
| 3 | PEKG20-003 | Indicator light | 2 |
| 4 | PEKG20-004 | Thermostat | 2 |
| 5 | PEKG20-005 | Front frame | 1 |
| 5.1 | PEKG20-005-001 | Bottom rail | 1 |
| 5.2 | PEKG20-005-002 | Left clevis | 1 |
| 5.3 | PEKG20-005-003 | Top clevis | 1 |
| 5.4 | PEKG20-005-004 | Right clevis | 1 |
| 5.5 | PEKG20-005-005 | Left vertical board | 1 |
| 5.6 | PEKG20-005-006 | Top rail | 1 |
| 5.7 | PEKG20-005-007 | Machine control board | 1 |
| 6 | PEKG20-006 | Chamber | 1 |
| 6.1 | PEKG20-006-001 | Baking stone | 1 |
| 6.2 | PEKG20-006-002 | Heating element | 2 |
| 6.3 | PEKG20-006-003 | Left layer board | 1 |
| 6.4 | PEKG20-006-004 | Up strip for the heating element | 1 |
| 6.5 | PEKG20-006-005 | Right layer board 1 | 2 |
| 6.6 | PEKG20-006-006 | Right layer board 2 | 1 |
| 6.7 | PEKG20-006-007 | Main panel of the chamber | 1 |
| 6.8 | PEKG20-006-008 | Cover board of the chamber | 1 |
| 6.9 | PEKG20-006-009 | Fixed plate for the pyrocotton | 1 |
| 6.10 | PEKG20-006-010 | Lamp shade | 1 |
| 7 | PEKG20-007 | Bottom fixed plate for the pyrocotton | 1 |
| 8 | PEKG20-008 | Top fixed plate for the pyrocotton | 1 |
| 9 | PEKG20-009 | Durothermic lamp | 1 |
| 10 | PEKG20-010 | Binding post | 1 |
| 11 | PEKG20-011 | Side board | 2 |
| 12 | PEKG20-012 | Rubber feet | 4 |
| 13 | PEKG20-013 | Shell | 1 |
| 14 | PEKG20-014 | Layer board for the chamber | 1 |
| 15 | PEKG20-015 | PG13.5 cable gland | 1 |
| 16 | PEKG20-016 | Cable | 1 |
| 17 | PEKG20-017 | Timer | 1 |
V. Installation Instruction
- All electrical power unit and circuit connection must be installed by a qualified electrician adhering to safety standards.
- Connection must be based on requirements.
- Ensure the rubber feet are securely installed.
- The product should be placed in a well-ventilated area on a solid platform. Maintain at least 10cm space between the product and walls or barriers. Keep the product away from combustible materials and ensure a fire extinguisher is readily available.
- Remove the protective packaging film from the surface.
- The power wire must be connected according to safety standards. Verify that the voltage and frequency conform to the product's parameters. Install a double-pole switch before connection. The working voltage error should be within ±10%.
- Important: The product must be connected to ground.
- Connect the cable to the power supply using a screwdriver according to the connection diagram. Loosen the screw inside the power point, plug in the cable, and ensure the sheet copper compresses the power line tightly. Incorrect connection may cause joint heating and burning of the power cord.
VI. Operation Instruction
- Turn on the power supply.
- The oven temperature can be adjusted between 0~350°C.
- Turn the timer clockwise to the desired time. The indicator light will turn on, and the heating element will start working. When the set temperature is reached, the indicator light will turn off. If the temperature drops below the set point, the heating element will automatically reheat, and the indicator light will turn on again.
- The internal lighting helps monitor the baking process.
- Cooking time depends on the amount of food; more food requires longer cooking time.
- Turn off the power when not in use.
VII. Warning
- If cleaning, repairing, or moving the machine, always pull out the plug first.
- Do not touch the switch or plug with wet hands.
- The machine cannot be flushed directly. Be careful not to let water flow into the switch during cleaning.
- Keep children away from touching or using the machine.
- The ground wire must be connected. All connections must be reinstated after maintenance.
VIII. Maintenance
- Pull out the plug before performing any maintenance. Clean the chamber after it has cooled down.
- For daily cleaning, use a dry cloth to wipe off grease from the chamber. Do not flush the chamber directly with water. For cleaning the baking stone, remove it, use a fur brush to clean its surface, rinse with water, and then dry it thoroughly. Avoid using any cleanser on the baking stone, as it can absorb water and cleanser, potentially affecting food flavor.
- It is recommended to have the machine maintained by a qualified electrician once a month.
IX. Trouble Shooting
| Stoppage | Solution |
|---|---|
| Not heating up |
|
| Short circuit | Contact the service center for repair suggestions. |
| Internal light not working |
|
| Scorching smell appears | Contact the service center to check if the connection is shorted out. |
| Baking unevenly | Readjust the thermostats for each heating element to observe their performance. If they function correctly, contact the service center to check if the heating element needs replacement. |
X. Specification
| Model | Temperature range | Dimension(mm) | Internal dimension(mm) | Voltage(V) | Power(KW) |
|---|---|---|---|---|---|
| PEKG20 | 0~350 °C | 560X570X280 | 415X400X120 | 220V | 2KW |
XI. Wiring Diagrams
The wiring diagram illustrates the electrical connections for the PEKG20 Pizza Oven. Key components include:
- PE: Protective Earth
- L: Live wire
- N: Neutral wire
- SA: (Not explicitly defined in text, likely a switch or fuse)
- PT: Timer
- ST1, ST2: (Not explicitly defined in text, likely thermal cut-offs or switches)
- R1, R2: Heating elements
- HL: Internal lighting
- HL1, HL2: Indicator lights
- S1: Switch of the internal lighting
The diagram shows how these components are interconnected, including the power supply, switches, thermostats, timer, heating elements, and indicator lights.
