Lumina Twirl™ Baton

Product Components

• CAPSULE LIGHT: MicroUSB rechargeable light unit with super bright multicolor LEDs. Features a built-in high power Li-ion battery. Refer to the accompanying capsule light insert for detailed instructions.
• CARBON FIBER SHAFT: Constructed from custom-woven 12mm carbon fiber with a custom elastomer grip. It is thin, lightweight, super-strong, and rigid.
• FLOWCAP: A thick, soft, and durable silicone end cap with a rigid inner structure. It snaps securely onto the tubes and releases with a firm twist. The recessed end-button operates the light.
• ANTI-VIBRATION: A diffusive insert designed to dampen vibration for quieter catches.
• COMPOSITE CONNECTOR: 3D-printed connectors that screw into the carbon fiber shaft to create a firm and secure connection.
• TUBES: Made of transparent, virtually bulletproof polycarbonate. They connect to the Flowcaps via snap-button holes.

Product Description

Introducing the Lumina Twirl™ Baton, the world's first durable, rechargeable illuminated twirling baton. It combines high-performance materials typically used in aerospace and racing industries, offering a thin, lightweight, yet super-strong and rigid carbon fiber shaft for optimum comfort and performance. The baton features transparent, stiff, and impact-resistant polycarbonate end-tubes and soft, clear, incredibly durable silicone end caps for maximum glow and protection. Crafted with the same high-tech materials that have propelled humanity into space, your illuminated Flowtoys twirling baton will help elevate your baton practice to new heights.

FOREVER FLOW LIFETIME WARRANTY

Flowtoys products are designed for a lifetime of use. While not indestructible, Flowtoys provides a warranty to encourage users to find their flow freely. If a Flowtoys product is broken due to intended use, Flowtoys offers free replacements for defective or non-working parts. For products in any condition, a 50% credit is offered at any time. Battery depletion is considered normal wear and tear and is covered for free for the first two years, with half-price replacements available thereafter. For warranty support, contact support@flowtoys.com. Please visit flowtoys.com for full warranty details. Flowtoys reserves the right to refuse coverage for warranty abuse. Contact Flowtoys before sending any product for service to avoid returns.

Using Your Flowcaps

Attaching/Removing Flowcaps from Tubes:

To detach: Twist the cap firmly to release the internal snap-buttons and pull it off the tube. To install: Place the cap over the tube, push, and twist until the buttons click into the holes. [click!]

Attaching Capsules to Flowcaps:

Insert the capsule light into the Flowcap, button side first. Twist and push until the light clicks and settles into place. Ensure the seams of the capsule are aligned with the buttons inside the cap for a proper fit within the tube.

Note: The Flowcap connects very firmly to the end of the tube. To twist and remove, grip the tube the cap is attached to, not the carbon fiber shaft. Always check connections before use.

Tip: If removing the Flowcap from the tube is difficult, check your hand grip. Gripping the internal buttons against the tube can make removal harder. Use the provided grippy mat to assist by holding the tube while twisting the cap off.

Troubleshooting

My Flowcap won't release from the tube.

Ensure you grip the top end of your Flowcap when removing it. Gripping lower down can cause the silicone to press against the tube, making removal more difficult.

My capsule lights are falling out of the Flowcap.

When installing capsule lights into a Flowcap, twist until you feel the light settle into place. It should allow for a slight wiggle left and right.

Caring for Your Baton

• Do not use glowsticks or WD-40 with tubing: Polycarbonate is strong but can break down when exposed to certain esters found in chemical glowsticks, mineral spirits, and WD-40. Avoid placing chemical glowsticks inside the tubes to prevent them from becoming brittle and shattering.
• Ensure all caps and connectors are fully secured before use: Verify that the buttons in your caps and connectors are properly clicked into the tubing holes.
• Clean your grip: Grip can degrade with use and is affected by skin oils. To extend grip life, clean it after heavy use and before long-term storage. Use rubbing alcohol and a cloth, or a cloth with warm soapy water to remove oils. Rinse thoroughly with clean water to remove soap residue.
• Flowcaps can be cleaned with soap and warm water, or machine washed with laundry. Air-dry only; do not use heat.

Explore More from Flowtoys

Flowtoys creates more than just LED batons. Visit flowtoys.com online to discover their full range of lights, props, and gear for dance, twirling, juggling, and lifestyle.