Costway HU11006 Bed Frame
Model: HU11006
Important Safety Information
Before You Start
- ⚠️ Please read all instructions carefully.
- ⚠️ Retain instructions for future reference.
- ⚠️ Separate and count all parts and hardware.
- ⚠️ Read through each step carefully and follow the proper order.
- ⚠️ We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
- ⚠️ Always place the product on a flat, steady and stable surface.
- ⚠️ Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.
Parts List
| Part ID | Description | Quantity |
|---|---|---|
| A | Leg (Left Front/Right Back) | x2 |
| A1 | Leg (Left Back/Right Front) | x2 |
| B | Horizontal bar (Left Front/Right Back) | x2 |
| B1 | Horizontal bar (Left Back/Right Front) | x2 |
| C | Vertical bar | x2 |
| D | Upper horizontal bar | x2 |
| E | Divider Horizontal bar | x1 |
| F | Guardrail HB/FB | x2 |
| G | Divider side rail | x1 |
| H | Side rail (Front/Back) | x2 |
| J | Slat | x14 |
Hardware List
| Item # | Description | Quantity |
|---|---|---|
| 1 | Wood dowel | x6 |
| 2 | Hex-head bolt (Ø15)1/4"*100mm | x10 |
| 3 | Hex-head bolt (Ø15)1/4"*80mm | x12 |
| 4 | Hex-head bolt (Ø12)1/4"*30mm | x2 |
| 5 | Hex-head bolt 1/4"*15 (9.5mm) | x22 |
| 6 | Hex-head bolt (Ø12)1/4"*65mm | x4 |
| 7 | Screw Ø4*50mm | x12 |
| 8 | Screw Ø4*30mm | x28 |
| 9 | Screw Ø3.5*15mm | x8 |
| 10 | Metal bracket 40*17*17*1.6mm | x2 |
| 11 | Leg support 100*42*19mm | x6 |
| 12 | Allen key (1/4")4.5*58mm | x1 |
Assembly Instructions
Step 1
Diagram shows the base frame assembly. Side rails (H) are attached to the base structure using wood dowels (1) and hex-head bolts (2, 5). Vertical bars (C) are also shown being attached using screws (7).
Step 2
Diagram shows the attachment of the upper horizontal bars (D) to the vertical bars (C) using hex-head bolts (3, 5) and leg supports (11).
Step 3
Diagram shows the assembly of the canopy frame. Horizontal bars (B, B1) are connected to the legs (A, A1) using dowels (1) and bolts (2, 5).
Step 4
Diagram shows the attachment of the side rails (H) to the assembled frame using bolts (6) and Allen key (12).
Step 5
Diagram shows the attachment of guardrails (F) to the frame using screws (6) and Allen key (12).
Step 6
Diagram shows the attachment of the divider horizontal bar (E) and upper horizontal bars (D) using bolts (3, 5) and Allen key (12).
Step 7
Diagram shows the attachment of divider side rails (G) and guardrails (F) using bolts (3, 5) and Allen key (12).
Step 8
Diagram shows the attachment of the remaining legs (A, A1) and side rails (H) using bolts (2, 4, 5) and Allen key (12).
Step 9
Diagram shows the installation of the slats (J) using screws (8). A close-up view highlights the correct placement of slats near the side rail and a warning symbol ❌ indicating not to overtighten screws at the outermost edge.
Note: Please make sure the bed slats close to the side rail before locking the screws to avoid breakage. This step is required for both the left and right sides. Moreover, please do not lock the screws of the bed slats at the outermost edge to avoid damaging.
Step 10
Diagram shows the attachment of leg supports (11) using metal brackets (10) and screws (9).
Return / Damage Claim Instructions
- ⚠️ DO NOT discard the box / original packaging. In case a return is required, the item must be returned in original box. Without this your return will not be accepted.
- ⚠️ Take a photo of the box markings. A photo of the markings (text) on the side of the box is required in case a part is needed for replacement. This helps our staff identify your product number to ensure you receive the correct parts.
- ⚠️ Take a photo of the damaged part (if applicable). A photo of the damage is always required to file a claim and get your replacement or refund processed quickly. Please make sure you have the box even if it is damaged.
- ⚠️ Send us an email with the images requested. Email us directly from marketplace where your item was purchased with the attached images and a description of your claim.
Contact Information
If you're having difficulty, our friendly customer team is always here to help.
- USA office: Fontana | USA: cs.us@costway.com
- AUS office: Truganina | AUS: cs.au@costway.com
- GBR office: FDS Corporation Limited, Unit 4, Blackacre Road, Great Blakenham, Ipswich, Ip6 0FL, United Kingdom | GBR: cs.uk@costway.com
- FRA office: Saint Vigor d'Ymonville | FRA: cs.fr@costway.com
