Costway HW71562 Outdoor Daybed with Canopy
Model Number: HW71562
Before You Start
Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.
Assembly Instructions
Please refer to the Part List and Hardware List for component identification. Follow these steps carefully for assembly.
- Step 1: Connect Right frame (A) and Side right frame (C) using Bolt (3) and Washers (7).
- Step 2: Connect Left frame (B) and Side left frame (T) using Bolt (3) and Washers (7).
- Step 3: Connect Seat frame (D) and Seat frame (D) using Bolt (5), Washers (7), and Nut (6).
- Step 4: Connect Seat frame (D) and Seat frame (D) using Bolt (5), Washers (7), and Nut (6).
- Step 5: Connect part from Step 3 and Part from Step 4 using Bolt (5), Washers (7), and Nut (6).
- Step 6: Connect Front Right frame (E) and Front Left frame (F) using Bolt (3) and Washers (7).
- Step 7: Connect Back Right frame (G) and Back Left frame (H) using Bolt (4) and Washers (7).
- Step 8: Connect part from Step 1 and Part from Step 6 using Bolt (3) and Washers (7).
- Step 9: Connect part from Step 8 and Part from Step 5 using Bolt (3) and Washers (7).
- Step 10: Connect part from Step 9 and Part from Step 7 using Bolt (3), (4) and Washers (7).
- Step 11: Connect part from Step 10 and Part from Step 2 using Bolt (3), (4) and Washers (7).
- Step 12: Connect part from Step 11 & Leg frame (I) using Bolt (1) and Washers (7).
- Step 13: Connect part from Step 12 & Plastic feet corner (8) & Plastic feet (9) using Bolt (2).
- Step 14: Connect part from Step 13 & Part from Step 1 & Part from Step 2 & Part from Step 7 using Bolt (4) & Washers (15).
- Step 15: Connect part from Step 14 & Arm right frame (L) & Arm left frame (M) using Bolt (2) & Washers (7).
- Step 16: Connect Canopy frame (N) & Canopy frame (R) using Screw (11).
- Step 17: Connect Canopy frame (O) & Canopy frame (R) using Screw (11).
- Step 18: Connect Canopy frame (P) & Canopy frame (R) using Screw (11).
- Step 19: Connect the part from Step 16, the part from Step 17 & the part from Step 18 with Waterproof canopy (U).
- Step 20: Connect part from Step 15 & Part from Step 19 using Bolt (3) & Washers (7), (10).
- Step 21: Connect part from Step 20 with Gas bar (12).
- Step 22: Put on Seat cushion (J) & Pillow (K) to complete Daybed.
Finish and Arrangement
The daybed is now assembled. Ensure all parts are securely fastened. The combination and arrangement can be adjusted as needed.
Return / Damage Claim Instructions
DO NOT discard the box / original packaging. In case a return is required, the item must be returned in the original box. Without this, your return will not be accepted.
Take a photo of the box markings. A photo of the markings (text) on the side of the box is required in case a part is needed for replacement. This helps staff identify your product number to ensure you receive the correct parts.
Take a photo of the damaged part (if applicable). A photo of the damage is always required to file a claim and get your replacement or refund processed quickly. Please make sure you have the box even if it is damaged.
Send us an email with the images requested. Email directly from the marketplace where your item was purchased with the attached images and a description of your claim.