Laresar Elite 3 Cordless Vacuum Cleaner

Important Safety Warnings

[Warning] Before using this product, read all instructions and warning marks on this manual and the product itself.

• Do not allow persons with reduced physical, sensory, or mental capabilities (including children) to use the product unsupervised.
• Use only as directed in this manual. Discontinue use and contact Laresar Customer Service if the product malfunctions, is dropped, damaged, left outdoors, or immersed in liquid.
• Use only on dry surfaces. Avoid use in wet areas like outdoors, bathrooms, or near pools. Do not use or charge the product on wet surfaces or expose it to rain or snow to prevent electric shock or injury.
• Keep hair, clothing, and fingers away from the suction inlet and moving parts to avoid injury. Do not point the hose, pipe, tools, or head towards eyes, ears, or mouth.
• Do not vacuum glass, sharp objects, small toys, pins, or paper clips, as this may cause product malfunction.
• Do not touch the power adapter with wet hands.
• Use only Laresar-specified accessories and replacement parts.
• Do not operate without the dust cup and filter properly installed.
• Stop the product before attaching or detaching the rotating brush.
• Do not spill water or liquids into the vacuum cleaner, as this increases the risk of electric shock.
• Exercise caution when cleaning stairs.
• Do not vacuum detergents, kerosene, ash, wet dust, sewage, or matches.
• Do not vacuum cement, plaster powder, small particles, or large items like paper balls, as this may clog the vacuum and damage the motor.
• Battery Safety: Do not dispose of batteries; recycle them safely. Do not use damaged or modified batteries. Do not incinerate or expose batteries to high temperatures. Avoid impact to the battery. If leakage occurs, wash affected skin or eyes immediately with soap and water or rinse with fresh air and seek medical attention if necessary. Dispose of according to local regulations. Keep batteries away from conductive metal objects like paper clips, coins, keys, or nails.
• Charging Safety: Inspect the charging cable for damage. Do not modify the charger. Use only the specified voltage. Unplug the charger when not in use or before cleaning. Do not pull the power cord to unplug. Do not wrap the charging cable around the charger. Fully charge the battery before first use or after long storage. Recharge every 3 months if stored for long periods. In case of smoke or fire during charging, unplug immediately and use a fire extinguisher (do not use water). Charge only within the specified temperature range (50°F-86°F / 8°C-35°C).
• Storage and Maintenance Safety: Store in a cool, dry place away from direct sunlight. Unplug the charger before cleaning or maintenance. Do not use lubricants, detergents, or polishes on any part of the product. Do not attach scented products or chemicals to the filter. Do not disassemble or repair the product yourself; contact Laresar Customer Service for assistance.
• Save these instructions: Keep away from fire [?], do not store near heat sources [?️], do not vacuum water or liquids [?], do not vacuum flammable objects [?], do not insert fingers into openings [?️], keep away from electrical/gas appliances [⚡?].

Package Contents

Please check the contents against the following list before use:

Overview and Accessories

Overview

The vacuum cleaner consists of the following parts:

• 1. Digital Display Screen: Shows battery level, suction mode, and status.
• 2. Power Switch: Turns the vacuum on and off.
• 3. Battery Pack: Removable power source.
• 4. Battery Pack Release Button: For detaching the battery.
• 5. Dust Cup: Collects debris.
• 6. Dust Cup Release Button: For emptying the dust cup.
• 7. Dust Cup Release Button: (Duplicate label in original, likely refers to the same button).
• 8. Main Unit Release Button: For detaching the main unit.
• 9. Adjustable Extension Tube: Connects the main unit to the cleaning head.
• 10. Tube Extension Button: (Likely a button to adjust tube length or detach it).
• 11. Motorized Brush Head Release Button: For detaching the brush head.
• 12. Motorized Brush Head: For cleaning floors.
• 13. LED Light: Illuminates the cleaning area.
• 14. Multi-functional Floor Brush: An alternative floor cleaning attachment.

Accessories

The digital display screen shows:

• A. Dustbin Cleaning Indicator: Alerts when the dustbin needs emptying.
• B. Suction Power Indicator Loop: Visualizes suction strength.
• C. Suction Mode Indicator: Displays current mode (Eco/Standard/Boost).
• D. Suction Adjustment Button: To change suction power.
• E. Battery Level: Shows remaining battery charge.
• F. Floor Brush Blockage Indicator: Alerts if the brush roller is blocked.

Accessory Descriptions:

• 1. Small Multi-functional Brush: Telescopic design, useful for removing dust from upholstered furniture and hard surfaces.
• 2. Crevice Nozzle: For cleaning hard-to-reach areas like windows, under beds, and gaps between furniture.
• 3. Mini Cleaning Tool: Cleans hair and debris from the brush roller, keeping the brush head clean.
• 4. Wall Mount Bracket: Allows the vacuum to be stored and charged on a wall.
• 5. Multi-functional Floor Brush: Cleans dust, debris, and hair from hard floors, carpets, and flannel surfaces.

Assembly and Wall Mounting

Product Assembly

The vacuum cannot stand on its own. Use the provided Laresar screws to securely fix the wall mount bracket to the wall.

Steps:

• 4.1.1 Attaching the Battery Pack: Slide the battery pack onto the main unit until it clicks into place.
• 4.1.2 Attaching the Adjustable Extension Tube: Connect the extension tube to the main unit and then to the cleaning head, ensuring a secure fit.
• 4.1.3 Attaching Necessary Cleaning Accessories: Connect the desired accessory (e.g., brush head, nozzle) to the extension tube or main unit.

Wall Mount Bracket

[Warning] Before installation, ensure there are no gas pipes or water pipes behind the wall. Ensure the wall mount bracket is securely attached to prevent it from falling.

• Step 1: Attach the bracket to the wall using the provided screws.
• Step 2: Mount the vacuum cleaner onto the bracket.

How to Use

Before use, please check the following:

• The battery is fully charged and securely in place.
• The dust cup and filter have been cleaned, dried, and properly installed.

Starting Operation

Press the power button to start the vacuum cleaner. Press the button again to turn it off.

Selecting Cleaning Mode

• The vacuum starts in 'Eco' mode.
• Touch the '+/-' button to select 'Standard' mode.
• Touch the '+/-' button again to switch to 'Boost' mode.

Charging Method

6.1 Charging Method:

• Method 1: Remove the battery pack to charge. Connect the charger to the battery pack.
• Method 2: Charge the main unit directly. Connect the charger to the main unit.
• Method 3: Charge while mounted on the wall. Mount the vacuum on the wall bracket and connect the charger.

Battery Indicator

The battery indicator on the display shows the remaining power.

• Charging Indicator: The indicator flashes blue while charging and remains solid blue when fully charged.
• During charging, the power indicator on the display changes according to the remaining battery level, and the battery icon flashes continuously.
• When fully charged, the display's battery indicator turns off, the battery icon stops flashing, and remains green.

Low Battery Indicator

• When the battery level drops below 15%, the battery indicator on the screen will flash red, indicating the need to charge soon.
• When the battery level drops below 30%, after turning off the vacuum, the battery level display will flash red for 30 seconds before turning off. Charge the vacuum as soon as possible.

Error Display

• Brush Roller Blocked: The LED light on the motorized brush head will turn off, and the red brush roller indicator will flash for 6 seconds before turning off.
• Host Blocked: The full dust cup reminder will flash red for 30 seconds and then disappear.
• Using Non-Laresar Adapter: The battery indicator and battery icon will turn red and flash for 60 seconds before turning off. Use only Laresar-provided adapters.

Maintenance

Regular cleaning will help prolong the life of your vacuum cleaner.

Main Unit Maintenance

• Turn off the power before cleaning the main unit.
• Wipe with a damp cloth using mild detergent.
• Store in a cool, dry place away from direct sunlight.

Dust Cup Maintenance

Emptying the Dust Cup:

• Press the dust release button to empty the dust.
• If the dust in the dust cup exceeds the MAX line during use, empty it promptly.

Cleaning the Dust Cup:

• Press the dust cup release button to detach the dust cup. Remove the filter sponge, HEPA filter, and stainless steel filter in order.
• Rinse the filter sponge and HEPA filter with water to remove dust. Do not soak them.
• Ensure the filters are completely dry before reassembling.

Filter Unit Cleaning

[Important] Wash the filter with cold water at least once a month.

• Rinse the filter sponge and HEPA filter with water to remove dust; do not soak them.
• Ensure filters are completely dry before reassembly.

Brush Roller Cleaning

[Important] Over time, hair can get tangled in the brush roller. Regular cleaning is recommended to ensure effective operation and maintain suction power.

• Remove the brush roller and gently clean the motorized brush head opening and suction nozzle.
• Use the Laresar mini cleaning tool to remove hair and debris tangled around the roller, then rinse with water.
• Reinsert the brush roller into the motorized brush head opening and push down the cover until it is securely in place. Ensure the brush roller is completely dry before use.

Specifications

Troubleshooting

Warranty

2-Year Limited Warranty:

For use in individual households as per the Laresar user manual, the Laresar vacuum cleaner is covered by a 2-year warranty against material and manufacturing defects.

This warranty provides all necessary labor and parts free of charge to ensure the vacuum cleaner operates correctly during the warranty period.

Manufacturer Warranty Terms:

Subject to the terms and exclusions outlined in this manual. Applies only to purchases from authorized Laresar retailers or Laresar's online store. This warranty is valid only in Japan.

Cases Not Covered by Warranty:

Laresar is not responsible for costs, damages, or repairs resulting from:

• Improper operation, handling, misuse, abuse, or lack of maintenance, or use not in accordance with the Laresar user manual.
• Commercial use or use for rental purposes, beyond normal household use.
• Use for purposes other than intended household use.
• Failure to use the product as described in Laresar's instructions or manual.
• Use of non-Laresar genuine parts.
• Failures or damage caused by fire, natural disasters (earthquakes, typhoons, lightning, etc.), salt damage, or abnormal voltage.
• Repairs or modifications performed by parties other than Laresar.
• Normal wear and tear of fuses, brushes, etc.
• Normal battery depletion or reduction in battery life over time.

Warranty Information Notes:

To receive warranty service, you will need product serial number, date of purchase, and retailer information. Keep your purchase receipt, invoice, or delivery slip for verification. All repairs will be handled by Laresar. Parts removed during repair will be retained by Laresar. Replacing parts does not extend the warranty period. If the vacuum cleaner does not function properly, or if you have questions after carefully reading this manual, please contact us. We will do our best to provide a satisfactory solution.

Contact Customer Service via Email: support08@laresar.us

Disposal, FCC, and Declaration of Conformity

Correct Disposal of This Product:

This marking indicates that the product should not be disposed of with other household wastes throughout the EU. To prevent harm to the environment or human health from uncontrolled waste disposal, recycle responsibly to promote sustainable reuse of material resources. Use return and collection systems or contact the retailer where the product was purchased for environmental safe recycling.

FCC STATEMENT:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Declaration of Conformity:

We (Manufacturer is responsible for this declaration) Ekoo Electronic Co.,Ltd. (Company name) B09, block B, f2, bldg. b, runfeng Pioneer Park, no.973, minzhi Avenue, Minzhi St., Longhua, Shenzhen, CN (Company address) declare under our sole responsibility that the product Trade name: Laresar, Equipment: Vacuum Cleaner, Model No.: Elite 3, to which this declaration relates, is in conformity with the essential requirement set out in the Council Directive on the Approximation of the laws of the Member States relating to LVD Directive(2014/35/EU) & EMC Directive(2014/30/EU) & RoHS(2011/65/EU). The product is responsible to affix CE marking. The following standards were applied: EN 60335-2-2:2010+A11:2012+A1:2013, EN 60335-1:2012+A11:2014+A13:2017+A1:2019+A14:2019+A2:2019, EN 62233:2008, EN 55014-1:2021, EN 55014-2:2021, EN IEC 61000-3-2:2019+A1:2021, EN 61000-3-3:2013+A2019, IEC62321-3-1:2013, IEC62321-4:2013, IEC62321-5:2013, IEC62321-6:2015, IEC62321-7-1:2015, IEC62321-7-2:2017, IEC62321-8:2017. Full Name: George.wang, Position: Approbation Manager. Signature: George.wang, Place/Date: Shenzhen, China/Doc.04-2021.