Laresar
CORDLESS VACUUM CLEANER
USER MANUAL
Model: Elite 3
1. IMPORTANT SAFETY INSTRUCTIONS
ATTENTION: Please read all instructions in this manual and the warning labels on the machine carefully before use.
1.1 Precautions for Use
- This Laresar machine is not intended for use by persons (including children) with reduced physical, sensory, or logical abilities, or lack of experience and knowledge, unless they have been supervised or instructed by a person responsible for their safety regarding the use of the machine.
- Use only as described in this Laresar user manual. If the machine does not function properly, has received a sharp impact, has been dropped, damaged, left outdoors, or fallen into water, do not use it and contact the Laresar Support Team.
- Suitable for dry locations ONLY. Do not install, charge, or use this appliance outdoors, in a bathroom, or within 3 meters of a pool. Do not use on wet surfaces and do not expose to moisture, rain, or snow.
- When using this appliance, keep hair, loose clothing, fingers, and all body parts away from openings and moving parts. Do not point the hose, aluminum alloy tube, or other accessories at your eyes or ears, and do not put them in your mouth.
- Do not use to pick up hard objects such as glass slag, needles, nails, etc.
- Do not touch the charger with wet hands to avoid electric shock.
- Use only Laresar-recommended accessories and spare parts.
- Do not use without the dustbin and filter.
- When removing or replacing a motorized brush bar, pull the power switch only after the cleaning head has been reassembled.
- Do not water or spill liquid onto the vacuum cleaner. This increases the risk of electric shock.
- Exercise extreme caution when cleaning on stairs.
- Please do not use the vacuum cleaner to suck up cleaning agents, kerosene, soot, wet dust, water, wastewater, matches, and other items.
- Please do not use the vacuum cleaner to suck up small particles such as cement, plaster powder, wall powder, or large objects such as toy paper balls, as the vacuum cleaner will be blocked and the motor will burn out.
1.2 Battery Precautions
- Do not discard the battery; it should be disposed of safely according to local regulations.
- Do not use a damaged or modified battery or machine. Damaged or modified batteries can exhibit unpredictable behavior, leading to fire, explosion, or injury.
- Do not burn batteries or expose them to high temperatures, as they may explode.
- The battery is a sealed unit and does not pose a safety hazard under normal circumstances.
- In the unlikely event that liquid leaks from the battery, do not touch the liquid, as it may cause irritation or burns. Observe the following precautions:
- Skin contact - may cause irritation. Wash with soap and water.
- Inhalation - may cause respiratory irritation. Get fresh air and seek medical advice.
- Eye contact - may cause irritation. Immediately flush eyes thoroughly with water for at least 15 minutes. Seek medical attention.
- Disposal - Wear gloves to handle the battery and dispose of it immediately according to local regulations or provisions.
- When the battery is not in use, keep it away from paper clips, coins, keys, nails, screws, or other small metal objects that could create a connection between terminals.
1.3 Charging Precautions
- Before use, check the charging cable for signs of damage or aging. A damaged or tangled charging cable increases the risk of fire and electric shock.
- Never modify the charger in any way.
- The charger is designed for a specific voltage. Always check if the mains voltage matches that indicated on the nameplate.
- Unplug the charger when the appliance is not used for a long time.
- When your vacuum cleaner is fully charged, needs cleaning, or repair, please unplug the charger from the socket in time and do not pull the power cord directly.
- Do not pull the cord to disconnect it from a socket; grasp the plug and pull to disconnect.
- Do not wrap the cord around the charger when storing.
- Please fully charge the battery when using it for the first time or after prolonged storage. If the product is not used for a long time, ensure the battery is charged and used at least every three months.
- If smoke or fire occurs during charging, immediately unplug the charger from the socket and extinguish the fire with a fire extinguisher. Do not use water to extinguish the fire, as this increases the risk of electric shock.
- Follow all charging instructions and do not charge the battery or appliance outside the specified temperature range. Improper charging or temperatures outside the specified range can damage the battery and increase the risk of fire. To ensure maximum battery life, Laresar recommends the following:
- When not in use, the machine should be stored at room temperature. Recommended range: 18°C to 28°C.
- The ambient temperature range for operation and charging should be 8°C to 35°C.
1.4 Precautions for Storage and Maintenance
- Please store the product in a cool, dry environment. Please avoid prolonged exposure to sunlight.
- Before removing the battery, cleaning, or maintaining the appliance, the charger must be unplugged from the socket.
- Please use a dry cloth to clean the vacuum cleaner. Please do not use gas or liquid that may crack the surface or cause the color to fade.
- Do not apply fragrances or perfumed products to the filter(s) of this appliance. The chemicals in such products are known to be flammable and can cause the machine to catch fire.
- Do not perform any maintenance other than that described in this manual or recommended by the Laresar Support Team.
- Do not disassemble the machine, as incorrect reassembly can lead to electric shock or fire. Contact the Laresar Support Team if service or repair is required.
STORAGE INSTRUCTIONS
?? Do not use near open flames.
??️ Do not store near heat sources.
?? Do not pick up water or liquids.
?? Do not pick up burning objects.
?✋ Do not put hands near the brush bar when the machine is in operation.
?? Do not place on or near the stove.
2. PACKAGE CONTENTS
Please check and confirm the accessories and parts according to the following list before use.
Part Name | Quantity |
---|---|
Main Unit | 1 |
Adjustable Extension Tube | 1 |
Motorized Brush Head | 1 |
2-in-1 Roller Brush | 1 |
Crevice Tool | 1 |
2-in-1 Upholstery Brush | 1 |
Mini Cleaning Brush | 1 |
Filter Replacement | 1 |
Sponge Replacement | 1 |
Wall Mounting Plate | 1 |
Charger | 1 |
Battery Pack | 1 |
User Manual | 1 |
3. OVERVIEW & ACCESSORIES
3.1 Overview
Diagram showing parts: Digital Display Screen, Switch Button, Dustbin, Dust Emptying Button, Battery Pack, Battery Release Button, Dustbin Release Button, Main Unit Release Button, Adjustable Extension Tube, Tube Telescopic Button, Motorized Brush Head Release Button, Motorized Brush Head, LED Light, 2-in-1 Roller Brush.
3.2 Digital Display Screen
Diagram of the screen with labels A-F:
- A. Full Dustbin Reminder
- B. Charging Status & Suction Power Display Loop
- C. Suction Mode Display (Eco/Standard/Boost)
- D. Suction Adjustment Button (+/-)
- E. Remaining Battery Power
- F. Blocked Floor Brush Indicator
3.3 Accessories
- 1. 2-in-1 Upholstery Brush: The retractable brush design helps you remove dust and hair from both upholstered furniture and hard-surface furniture.
- 2. Crevice Tool: Remove dust from hard-to-reach places such as windows, bed bases, gaps between tables and chairs, etc.
- 3. Hair Cleaning Tool: Remove hair, dirt, and micro-dust from the brush shaft to keep the brush head clean.
- 4. Wall Mounting Plate: Securely hold the vacuum cleaner on the wall mount for easy storage and battery charging.
- 5. 2-in-1 Roller Brush: Remove dust, dirt, and hair from hard floors, carpets, and velvet.
4. ASSEMBLY & WALL MOUNTING
4.1 Product Assembly
4.1.1 Install the Battery
[Diagram description: Slide the battery pack into the main unit until it clicks.]
4.1.2 Install the Extension Tube
[Diagram description: Connect the extension tube to the main unit and the floor head, ensuring a click.]
4.1.3 Install Desired Cleaning Accessory
[Diagram description: Connect the chosen accessory (e.g., brush head, crevice tool) to the extension tube or main unit.]
4.2 Wall Mounting Plate
The vacuum cleaner cannot stand on its own. Securely attach the wall mounting plate to the wall using the screws provided by Laresar.
WARNING:
- Please ensure there are no gas, water, or electrical cables and wires behind the mounting area.
- Ensure the dock is installed firmly so it does not fall off.
[Diagram description: Shows two steps for mounting the plate, likely involving screws and aligning the unit.]
5. HOW TO USE
Before use, ensure:
- The battery is fully charged and secured.
- The dustbin and filters are cleaned, dried, and secured.
5.1 Getting Started
Press the power button; the device will start working. Press the button again to shut down the device.
5.2 Selecting Cleaning Mode
- Start in "Eco" mode.
- Touch the "+/-" button to set to "Standard" mode.
- Touch the "+/-" button again to switch to "Boost" mode.
[Diagrams showing the display screen changing modes.]
6. CHARGING METHODS
6.1 Charging Methods
- ① Remove the battery and charge it separately. [Diagram: Battery pack connected to charger.]
- ② Connect the main unit to charge. [Diagram: Main unit connected to charger.]
- ③ Hang on the wall mount for charging. [Diagram: Vacuum cleaner docked on wall mount, charging.]
6.2 Battery Indicator
6.2.1 Charging Indicator
The battery indicator blinks blue while charging and stays solid blue when fully charged.
- Blinking blue light: Charging
- Solid blue light: Fully charged
The number indicates the remaining power.
While charging, the operating indicator on the display changes with battery power, and the battery icon continues to blink.
When the battery is fully charged, the battery indicator on the display turns off, and the battery icon stops blinking and remains green.
[Diagrams showing battery status on display.]
6.2.2 Low Battery Indicator
- When the battery level is below 15%, the battery indicator on the screen starts blinking red. The vacuum cleaner should be charged as soon as possible.
- When the battery power is less than 30%, the battery indicator on the screen blinks red for 30 seconds after the vacuum cleaner is turned off, then turns off. The vacuum cleaner should be charged as soon as possible.
[Diagrams showing low battery states.]
6.3 Abnormal Indicator
- If the brush roll is blocked, the LED light on the electric floor brush will turn off, and the red brush roll indicator will blink for 6 seconds and then turn off.
- If the main unit is blocked, the red dustbin full indicator will blink for 30 seconds and then turn off.
- If an adapter not supplied by Laresar is used, the battery indicator and battery symbol will turn red, blink for 60 seconds, and then turn off.
[Diagrams showing abnormal states.]
7. MAINTENANCE
Please clean regularly to extend the life of the vacuum cleaner.
7.1 Main Body Cleaning
- Turn off the appliance before cleaning the body.
- Please use a neutral detergent and wipe the body with a slightly damp cloth.
- Please avoid sunlight and store in a cool, dry place.
7.2 Dustbin Cleaning
7.2.1 Empty the Dustbin
- Press the dustbin release button to empty the dust.
- If the trash in the dustbin exceeds the MAX line during use, please empty it promptly.
[Diagrams showing emptying the dustbin, with "X MAX" and "✓ MAX" indicators.]
7.2.2 Clean the Dustbin
Press the dustbin release button to remove the dustbin. Remove the sponge, HEPA filter, and stainless steel filter one by one.
[Diagrams showing removal of components and rinsing.]
7.3 Filter Cleaning
Note: Wash the filters at least once a month with cold water.
- The filter sponge and HEPA filter can be rinsed with water to remove dust.
- Please ensure the filters are completely dry before reassembly.
[Diagrams showing filter rinsing and drying, with time indicators (1 min, 24h) and temperature symbols.]
7.4 Brush Roll Cleaning
Note: After prolonged use, hair or similar debris can clog the bristles. It is recommended to clean the brush roll regularly to ensure efficient operation and maintain suction power.
- Remove the brush roll, carefully clean the motorized brush window and suction port.
- Remove debris wrapped around the roll using the Laresar Hair Cleaning Tool and rinse with water.
- Insert the brush roll into the motorized brush window and press the cover down until it is securely in place. (Please ensure the brush roll is completely dry before use).
[Diagrams showing brush roll cleaning and reinstallation.]
8. SPECIFICATIONS
Product | Model | Rated Voltage | Cleaning Modes |
---|---|---|---|
Vacuum Cleaner | Elite 3 | 25.9V | Eco/Standard/Boost |
9. TROUBLESHOOTING
Issue | Cause | Solution |
---|---|---|
Vacuum cleaner does not work | (1) No power (2) Battery not installed (3) Motorized brush head blocked by hair or other debris (4) Automatic overheat protection (5) Switch button not functioning | (1) Charge the vacuum cleaner (2) Install battery pack (3) Clean the motorized brush head (4) Restart after cooling down (5) Contact Laresar Support for replacement. |
Weak suction power | (1) Dustbin is full (2) Dust guide plate misaligned (3) Filters are clogged or not installed (4) Filter sponge or HEPA filter not dry (5) Extension tube and motorized brush head blocked by hair or other debris (6) Low power | (1) Empty the dustbin (2) Align the dust guide plate with the correct hole (3) Clean or replace the filter and install correctly (4) Dry the filter sponge or HEPA filter (5) Clean the extension tube and motorized brush head (6) Charge the vacuum cleaner. |
Insufficient runtime after charging | (1) Battery is dead or faulty (2) Charger not properly connected (3) Incorrect charger | (1) Replace the battery (2) Ensure the charger is fully plugged into the socket and the battery (3) Use the Laresar charger. |
Insufficient operating time after charging | (1) Insufficient charging time (2) Battery aging (3) Motorized brush head blocked by hair or other debris (4) Incorrect charger | (1) Vacuum cleaner fully charged (2) Replace battery (3) Clean the motorized brush head (4) Use the Laresar charger. |
Brush roll stops rotating | (1) Brush roll blocked by hair, pebbles, or other debris (2) Dustbin is full of dust | (1) Clean the brush roll (2) Avoid picking up large debris like pebbles (3) Empty the dustbin (4) Contact Laresar Support for replacement. |
10. WARRANTY
2-Year Limited Warranty
Your Laresar machine is warranted for 2 years against original defects in material and workmanship when used for private household purposes according to the Laresar user manual. This warranty provides, at no additional cost, all labor and parts necessary to ensure your machine is in proper working order during the warranty period.
WHAT IS COVERED?
- In accordance with the requirements of this user manual, subject to the following terms and exclusions.
- Applies only to purchases from authorized Laresar retailers.
- This warranty is valid only when the machine is used in the country where it was sold.
WHAT IS NOT COVERED?
Laresar is not liable for costs, damages, or repairs arising from:
- Machines purchased from an unauthorized dealer.
- Careless operation or handling, misuse, abuse, and/or lack of maintenance or use not in accordance with the Laresar user manual.
- The machines are used for commercial or rental purposes in addition to normal household use.
- Use of parts that do not comply with the Laresar user manual.
- Use of parts and accessories other than those manufactured or recommended by Laresar.
- External factors unrelated to product quality and use, such as accidental water damage.
- Repairs or modifications performed by unauthorized persons or representatives.
- Normal wear and tear, including dustbin, belt, filter, HEPA, brush roll, and power cord (or if external damage or misuse is diagnosed), carpet or floor damage due to use not in accordance with manufacturer's instructions, or brush roll that cannot be rotated and requires brushing.
- Shortening of battery discharge time due to age or battery usage.
HOW TO MAKE A CLAIM?
Please keep your proof of purchase. To make a claim under our limited warranty, you must provide your original proof of purchase with the date of purchase and order number.
All work will be carried out by Laresar or its authorized representative. All replaced defective parts become the property of Laresar. Service under this warranty does not extend the warranty period.
If your machine is not functioning properly or you have further questions after carefully reading this manual, please feel free to contact us. We will do our best to provide you with a satisfactory solution.
Email our Customer Service: support03@laresar.us
[Customer service icon] Laresar is here to help and we are glad to serve you.
Correct Disposal of This Product
This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Declaration of Conformity
We (Manufacturer is responsible for this declaration)
Ekoo Electronic Co.,Ltd. (Company name)
B09,block B,f2,bldg.b,runfeng Pioneer Park,no.973, minzhi Avenue, Minzhi St., Longhua, Shenzhen, CN (Company address)
declare under our sole responsibility that the product
Trade name: Laresar
Equipment: Vacuum Cleaner
Model No.: Elite 3
to which this declaration relates is in conformity with the essential requirement set out in the Council Directive on the Approximation of the laws of the Member States relating to LVD Directive(2014/35/EU) & EMC Directive(2014/30/EU) & RoHS(2011/65/EU) product is responsible to affix CE marking, the following standards were applied:
- EN 60335-2-2:2010+A11:2012+A1:2013
- EN 60335-1:2012+A11:2014+A13:2017+A1:2019+A14:2019+A2:2019
- EN 62233:2008
- EN 55014-1:2021
- EN 55014-2:2021
- EN IEC 61000-3-2:2019+A1:2021
- EN 61000-3-3:2013+A2019
- IEC62321-3-1:2013
- IEC62321-4:2013
- IEC62321-5:2013
- IEC62321-6:2015
- IEC62321-7-1:2015
- IEC62321-7-2:2017
- IEC62321-8:2017
Full Name: George.wang Position: Approbation Manager
Signature: George.wang Place/Date: Shenzhen,China/Doc.04-2021