INNOCN 27G1G Quick Installation Guide
Precautions
Before using this product, please read this User Manual carefully and keep it well.
- Keep the monitor away from water sources or damp places, such as bathrooms, kitchens, basements, and swimming pools.
- Ensure the monitor is placed on a flat surface. If the monitor falls, it may cause personal injury or device damage.
- Store and use the monitor in a cool, dry, and well-ventilated place, away from emission and heat sources.
- Do not cover or block the vent hole in the rear casing. Do not use the product on a bed, sofa, blanket, or similar objects.
- The supply voltage range of the monitor is printed on the label on the rear casing. If you cannot determine the supply voltage, consult the distributor or local power company.
- If the monitor will not be used for a long period, cut off the power supply to avoid electric shock on rainy days and damage due to abnormal supply voltage.
- Use a reliable grounded socket. Do not overload the socket, as it may cause fire or electric shock.
- Do not put foreign objects into the monitor, as this may cause short circuits, leading to fire or electric shock.
- Do not disassemble or repair this product yourself to avoid electric shock. If faults occur, contact after-sales service directly.
- Do not pull or twist the power cable forcefully.
- The screen surface has a polarizer layer (not a protective film). Do not peel it off, as this may damage the product and invalidate the warranty.
Installation of Base
Follow the diagrams to install the base.
Wall-mounted Installation
Follow the diagrams for wall mounting instructions.
Language Selection
When booting for the first time, you need to set the default language of the monitor menu. Press the navigation buttons (▲▼) to select the language, and press the OK button (●) to confirm.
Available languages include: English, 简体中文, Deutsch, Español, Italiano, Français, Русский, Türkçe, 日本語, 한국어, 繁体中文, Suomi.
Cable Connection
Connect the necessary cables (Power cable, HDMI Cable, DP Cable) as shown in the diagram. The bottom interface configuration at the back of the monitor may vary with products.
Note: If the power cable or signal cable is damaged, replace it with special soft cables or components purchased from the manufacturer or maintenance department.
Adaptive-Sync & Game Mode
Adaptive-Sync: This feature is off by default. To activate, you need a DP or HDMI cable, FreeSync-compatible hardware, and the latest graphic drivers. After connecting your computer and monitor, you may receive a prompt to enable the feature. If not, enable it in your graphics card menu. Refer to your graphics card manufacturer's documentation for instructions.
Gameplus: Press the navigation button (●) to switch Gameplus modes. Choose the crosshair icon best suited for your game. These icons are designed to optimize aim during shooting games but can be used for other scenarios.
Description of Buttons
The control pad allows for various functions:
- 1. Power: Press the control pad to turn the display on/off.
- 2. Left: Exit / Port input shortcut.
- 3. Down: Select menu.
- 4. Right: Main Menu / Ok.
- 5. Up: Profile shortcut / Select menu.
Indicator Light Explanation
6. Indicator Light: A solid blue light indicates the power is on and the monitor is operating normally. A flashing blue light indicates no video source, no horizontal or vertical signal detected, or low power. Ensure your computer is on and all video cables are fully inserted and/or connected.
HDMI Information
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
Regulatory Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CAN ICES-3 (B)/NMB-3(B)
Contact Information
Home Page: www.innocn.com
Global Customer Service: service@innocn.com
Japan Customer Service: service-japan@innocn.com