INNOCN N1F PRO Portable Monitor

Welcome

Thank you for choosing INNOCN®! We hope the INNOCN® product you purchased will serve you well. To ensure safety and trouble-free operation of your device, please read the user guide carefully and keep it for future needs.

For customer service & technical support, please email: service@innocn.com.

For the most up-to-date guidance for your product, registering INNOCN membership, and warranty information, please visit our homepage: http://www.innocn.com.

HDMI Trademark Notice: The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Safety Precautions

1. Read all warnings and follow all instructions. Keep this user guide for later reference.
2. Do not use this device near water. To reduce the risk of fire or electric shock, do not expose the device to moisture.
3. Do not place the device on an uneven or unstable surface. The device may fall over resulting in an injury or malfunction.
4. Avoid exposing the device to direct sunlight or other sources of sustained heat.
5. Always use genuine INNOCN components to ensure safety and product performance.
6. To avoid the risk of electric shock or component damage, switch off the power before connecting other components to the display.
7. Disconnect the power plug from the AC outlet if the device will not be used for a long period of time.
8. When connecting to a power outlet, DO NOT remove the grounding prong. Please ensure grounding prongs are NEVER REMOVED.
9. Place the device in a well-ventilated area. Do not place anything on the device that prevents heat dissipation.
10. The power adaptor must be replaced when using different voltage from that specified in the User Guide. For more information, please contact INNOCN.
11. Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
12. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
13. Plastic bags can be dangerous. Keep plastic bags away from babies and children to avoid danger of suffocation.
14. Do not attempt to repair the product by yourself. Opening the back cover may expose you to high voltages, the risk of electric shock, and other hazards. If repair is required, please contact INNOCN anytime at service@innocn.com.
15. If there are visual smoke or sparks, unplug the power cord and contact INNOCN at service@innocn.com. Do not try to repair the product yourself.
16. To avoid risk of electric shock, do not touch the power plug and ports with wet hands.

Packaging List

• Monitor x1
• Mini HDMI cable x1
• Type-C data cable x1
• Charger x1
• USB Type-C power cable x1
• Lens Cloth x1
• Quick Start Guide
• Warranty Card x1

Product Instruction

Key Instruction

Power Button: Blue: On; Red: No input signal / Standby mode; Dark: Off.

LED Indicator:

• Press it once to pop up the navigation interface.
• Press it twice to select signal source.
• Long press the power button to turn the monitor on/off.

Up Key:

• Press it once to pop up the navigation interface.
• Press it twice to adjust brightness.
• Long press the Up key to adjust volume.

Down Key:

• Press it once to pop up the navigation interface.
• Press it twice to enter the OSD menu.

Input Connector

The monitor features the following input ports: Headset, two Type-C ports, and one Mini HDMI port.

Connection Steps:

1. Connect the Type-C data cable to the data port of the monitor and your Laptop/Phone.
2. Connect the Type-C power cable to the power port of the monitor and the Charger.

Notes:

• The monitor is touchable only when the input source is from USB Type-C. For HDMI input source, you need a USB-A to USB Type-C cable (not included) connected to use the touch function.
• If a cable is damaged, please replace it with a new INNOCN cable.

OSD (On-Screen Display) Menu

Accessing the Menu:

1. Press any key to pop up the navigation interface.
2. Press the Up key to enter brightness adjustment.
3. Press the Down key to enter the OSD menu.
4. Press the Power button to enter signal source selection.

Brightness Adjustment

Press the Up key twice to pop up the brightness adjustment window. Use the Up/Down keys to adjust brightness. Press the Power button to enter and exit. The window disappears after 5 seconds of inactivity.

Signal Source Selection

Press the Power button twice to pop up the signal switch window. Use the Up/Down keys to select the input signal. Press the Power button to enter and exit. The window disappears after 3 seconds of inactivity.

OSD Menu Navigation

Press the Down key twice to enter the OSD menu. Use the Up/Down keys to switch options. Press the Power button to enter the next-level menu, select an option, or return to the previous level. The window disappears after 5 seconds of inactivity.

Scene Mode

Switch between different display modes: Standard Mode, Movie Mode, Reading Mode, Night Mode, Game Mode, Energy Saving Mode, Eye Protection Mode.

Use Up/Down keys to switch options. Press Power button to enter/select. The window disappears after 5 seconds of inactivity.

Picture Setting

Adjust image settings like brightness, contrast, DCR, hue, saturation, black level, and sharpness. Navigate options with Up/Down keys. Press Power button to enter sub-menus or confirm selections. The window disappears after 5 seconds of inactivity.

Color Temperature Setting

Adjust color temperature to Warm, Cold, Design, or User presets. For User mode, you can adjust Red, Green, and Blue levels. Navigate options with Up/Down keys. Press Power button to enter sub-menus or confirm selections. The window disappears after 5 seconds of inactivity.

Audio Setting

Adjust volume or mute the audio. Navigate options with Up/Down keys. Press Power button to enter sub-menus or confirm selections. The window disappears after 5 seconds of inactivity.

OSD Setting

Configure OSD settings such as Language, OSD Exit Time, OSD Transparency, Input Source, Over Drive, and Reset. Navigate options with Up/Down keys. Press Power button to enter sub-menus or confirm selections. The window disappears after 5 seconds of inactivity.

Exit Menu

The menu can be exited automatically after 5 seconds of inactivity, or manually by navigating to a 'Return' or 'Exit' option and confirming.

Troubleshooting

Product Specification

Warranty Information

What is covered in your warranty?

1. Warranty Period: 3 Years for product from date of purchase.
2. This warranty is confined to the first purchaser of the product only.

This Warranty is not Applicable:

1. The product is not purchased from an Authorized INNOCN dealer.
2. The product is not used according to instructions given in the instruction manual.
3. Defects caused by improper use as determined by company personnel.
4. Modification or alteration of any nature is made in the electrical circuitry / or physical construction of the set.
5. Installation / repair work is carried out by persons / agency other than authorized by the company.
6. The original serial number is removed, obliterated or altered from the machine or cabinet.
7. Accidents, Acts of God, lightning, water, fire, public disturbances, improper ventilation, voltage fluctuations or any cause beyond the control of INNOCN.