AUTOOL ATF705 Automatic Transmission Fluid Exchanger User Manual

Product Overview

The AUTOOL ATF705 Automatic Transmission Fluid (ATF) Exchanger Machine is designed for fully automatic operation, providing high-precision, equal-quantity cleaning and oil replacement for automatic transmissions. It achieves a fluid change rate of over 90% and ensures the quality of exchange between new and old transmission fluid, offering ultimate protection for the vehicle's automatic transmission. Its intelligent process design makes it an effective tool for advanced automotive maintenance.

Any use beyond the intended purpose of the equipment is strictly prohibited.

Specifications

Features

• Automatic recognition of oil inlet/outlet direction, intelligently switching the automatic transmission's fluid flow direction.
• Fully automatic completion of new and old transmission fluid replacement.
• Fully automated program control for high-precision, equal quantity exchange between new and old fluid.
• Fully automatic recognition of power supply polarity.
• Automatic transmission cycle cleaning functionality.
• Automatic adjustment of refilling quantity.
• Compatible with European, American, Japanese, Korean, and domestic car models via specialized adapters.
• Effectively solves the problem of incomplete manual transmission fluid replacement.
• Enhances the working performance of the transmission.
• Extends the life of the transmission.

Product Structure

The AUTOOL ATF705 features several key components:

• A: Control Panel - The main interface for operating the machine.
• B: Oil Return Pressure Gauge - Displays the pressure of the returned oil.
• C: Old Oil Level Window - Allows visual inspection of the old oil level.
• D: New Oil Level Window - Allows visual inspection of the new oil level.
• E: New Oil Filling Port - Port for adding new transmission fluid.
• F: New / Old Oil Window - A combined window for viewing both new and old oil levels.
• G: Power Switch - To turn the unit on and off.
• H: Fuse - Protective component for the electrical system.
• I: Transmission Connection Hose - Connects the machine to the vehicle's transmission.

Safety Rules

Always keep this user manual with the machine. Read all operational instructions before use. Failure to follow instructions may result in electric shock or irritation.

General Safety Rules

• This equipment is for professional use only and must be operated by trained and qualified personnel.
• Do not operate under the influence of drugs, alcohol, or medication.
• Modifications or use for unintended purposes are strictly prohibited.
• Keep out of reach of children.
• Ensure a safe distance for nearby personnel and animals during operation.
• Avoid working in rain, water, or damp environments. Maintain a well-ventilated, dry, clean, and bright work area.

Handling

• Used/damaged equipment must be disposed of in an environmentally friendly manner at designated collection points.
• Waste oil is hazardous and must be processed at a pollution recovery site.

Electrical Safety Rules

• Do not twist or bend the power cord. If damaged, do not use the product.
• Keep the power cord away from heat, oil, sharp edges, and moving parts.
• Damaged power cords must be replaced by qualified personnel.

Equipment Safety Rules

• Never leave the equipment unattended when powered on. Turn off and disconnect the power cord when not in use.
• Do not attempt self-repair.
• Verify socket voltage and fuse ratings match the nameplate before connecting to power.
• Protect the equipment from rain, moisture, mechanical damage, overload, and rough handling.

Application

• Before use, check power supply lines, hoses, and adapters for damage. Do not operate if damaged.
• Use only in compliance with safety instructions, technical documents, and vehicle manufacturer specifications.
• Use only brand-new and unopened supplementary fluids.

Personnel Safety Rules

• Avoid contact with filling oil, as it may be harmful to health.
• Always wear protective glasses [?] to protect eyes from splashes. In case of contact, rinse eyes with running water for several minutes. Consult a doctor if symptoms persist.
• Always wear protective gloves [?] to avoid skin contact with oils. Wash skin immediately with soap and water if contact occurs. Remove contaminated clothing or shoes promptly.
• If swallowed, seek immediate medical advice.
• Maintain a safe distance from hot engine components (exhaust pipes, radiators) to prevent burns.
• Ensure stable footing for safe control of the equipment in unexpected situations.

Cautions

General Safety

• Read the entire manual carefully before use.
• Do not use "Equal Exchange" or "Add New Oil" functions when the device is not connected to a car.
• Do not add ATF or cleaning agents through the oil filling port during operation.
• When storing, ensure new and old oil tanks are empty. Transfer old oil immediately to another container to maintain precision.
• Place the equipment on a level surface to ensure proper oil pump function.
• During Equal Exchange, avoid turning the engine off and restarting it (except in emergencies) to prevent voltage fluctuations that could affect accuracy.

Maintenance and Care

• Check for leaks at all connection points during oil exchange.
• After each operation, drain waste oil from the old oil tank and store new oil in a container to keep the electronic scale unloaded.
• Keep the new oil tank clean.
• If abnormal weight readings occur for new/old oil, use the one-key zeroing function to reset the electronic scales after draining tanks.
• If the problem persists after zeroing, contact customer service for calibration.
• (If the equipment differs from the manual, follow the equipment's actual operation.)

Operations Instruction

Preparation Before Operation

Connecting Power

Connect the clamps to the car battery terminals (DC12V). The device automatically recognizes polarity.

Lifting the Car

Raise the car so drive wheels are at least 20cm off the ground. Engage the handbrake and use wheel chocks for stability.

Connecting the Hoses

• Locate the connection oil pipe between the transmission and radiator and disconnect the accessible one.
• Connect appropriate connectors from the box to the ends of the disconnected oil pipe.
• Connect the device's hoses to the transmission oil pipes without regard to flow direction.

Check and Confirm

Start the engine, ensure hoses are secure and leak-free, then turn on the device's power switch.

Functional Operation

Cycle Cleaning

Add cleaning fluid (or flush with new oil if no fluid is added).

• Method One: Add cleaning fluid directly to the transmission via the dipstick opening.
• Method Two: Add cleaning fluid to the equipment, then feed it to the transmission.
• Ensure the new oil tank is empty. Add cleaning fluid to the new oil barrel via the filling port (recommend >1L; if <1L, add new oil to reach 1L).
• Select the "Add New Oil" function.
• Set the cleaning fluid amount to match the new oil display volume.
• Without starting the engine, select "Start" to confirm. The cleaning fluid will be automatically added to the transmission.
• Select the "Cycle Cleaning" function, set the cleaning time, and select "Start" to begin the countdown. Cleaning can be stopped with the stop button.

Important Tips: For best results, set cleaning time to over 20 minutes. During cycle cleaning, the engine should run, and gears should be switched (approx. 1 minute per gear). In high-speed gear, press accelerator to reach 60 km/h or more to engage the high-speed gear control oil route.

Equal Exchange of Old and New Oil

• Add transmission fluid into the equipment's oil filler port.
• Select the "Equal Exchange" function and set the fluid amount to be exchanged.
• Start the vehicle's engine, select "Start" to confirm and begin the exchange. The interface displays parameters in real time.

Important Tips: Ensure oil hoses are properly connected. The set exchange volume must not exceed the new oil tank capacity. During operation, set replacement amount to ~2L more than the transmission's rated oil volume for thorough replacement, especially if cleaning fluid was used. This minimizes damage to seals from residual cleaning fluid. During replacement, switch gears as needed (approx. 1 minute per gear). In high-speed gear, press accelerator to reach 60 km/h or more to engage the high-speed gear control oil route.

Do not add new transmission fluid midway through this function; wait until it is finished. If new fluid is needed, add it only after completion.

Adding New Oil

Use this function when the vehicle's ATF level is insufficient and needs topping up to the rated value.

• Select the "Add New Oil" function and set the amount to be added.
• Select "Start" to confirm and begin the exchange. The interface displays parameters in real time.

Important Tips: The amount to be added must not exceed the new oil tank capacity. Do not start the engine.

Recycling Used Oil

Use this function to recycle used oil from the vehicle's automatic transmission back into the equipment.

• Select the "Recycle Used Oil" function and set the amount to be recycled.
• Start the vehicle's engine, select "Start" to confirm and begin the exchange. The interface displays parameters in real time.

Drain New Oil

• Select the "Drain New Oil" function. Ensure the equipment's oil hoses are NOT connected to the vehicle.
• Select "Start" to confirm. Oil from the new oil tank will be drained into the old oil tank.

Draining Used Oil

• Open the equipment's back door. Loosen the strap on the old oil tank, remove all hoses from inside it, and take the old oil tank out. Drain the old oil.
• After draining, place the empty old oil tank on the weighing pan, re-insert hoses, and secure them with straps.

Maintenance Service

AUTOOL products are made of durable materials and undergo rigorous production and quality control processes. Regular maintenance ensures stable operation and longevity.

Maintenance Guidelines

• Avoid rubbing the product against rough surfaces, especially the sheet metal housing.
• Regularly check and tighten all connected parts to ensure safe operation.
• Treat external and internal parts that contact chemical media with anti-corrosion treatment (rust removal, painting) to improve resistance and extend service life.
• Adhere to safe operating procedures; do not overload the equipment. Ensure safety guards are functional. Inspect the circuit and replace aging wires promptly.
• Regularly clean and replace the oil pump, oil filter, and other consumables. Avoid contact with corrosive liquids when adjusting parts or replacing worn components.
• Store the product in a dry place when not in use. Avoid hot, humid, or non-ventilated locations.

Warranty

A three-year warranty is provided for the main unit, and a one-year warranty for accessories, starting from the date of receipt.

Warranty Access

• Repair or replacement is determined by the product's breakdown situation.
• AUTOOL guarantees the use of brand-new components, accessories, or devices for repairs/replacements.
• For failures within 90 days of receipt, AUTOOL covers shipping costs and provides free replacement accessories upon submission of video/pictures. For failures after 90 days, the customer bears shipping costs, while AUTOOL provides parts for free replacement.

Conditions Not Covered by Warranty

• Products not purchased through official or authorized channels.
• Product breakdown due to failure to follow usage or maintenance instructions.

AUTOOL is committed to providing excellent design and service.

Disclaimer

All information, illustrations, and specifications are based on the latest available data at the time of publication. AUTOOL reserves the right to modify the manual and the machine without prior notice. Physical appearance and color may vary from the manual; refer to the actual product. While efforts are made to ensure accuracy, inaccuracies may exist. Contact your dealer or AUTOOL after-service center if in doubt. AUTOOL is not responsible for consequences arising from misunderstandings.

Return & Exchange Service

If unsatisfied with AUTOOL products purchased from authorized platforms or dealers, returns are accepted within seven days of receipt, or exchanges for equivalent products within 30 days of delivery.

• Returned/exchanged products must be in saleable condition with proof of purchase, accessories, and original packaging.
• AUTOOL will inspect returned items for eligibility. Items failing inspection will be returned without refund.
• Exchanges can be processed through the customer service center or authorized distributors. Returns should be made to the original point of purchase. For issues with returns/exchanges, contact AUTOOL Customer Service.

Contact Information

• China: 400-032-0988
• Oversea Zone: +86 0755 23304822
• E-mail: aftersale@autooltech.com
• Facebook: https://www.facebook.com/autool.vip
• YouTube: https://www.youtube.com/c/autooltech

Confirmation of return/exchange service will be sent via message and email.

EU Declaration of Conformity

AUTOOL declares that the Auto ATF Exchanger (Model ATF 705) complies with:

• CE-MD Committee Directive 2006/42/EC
• RoHS Directive 2011/65/EU + 2015/863 + 2017/2102

Applied Standards include:

• EN 60204-1:2018, EN ISO 12100:2010
• IEC 62321 series standards.

Certificate Numbers: ZHT-230207010C, ZHT-230207011C

Test Report Numbers: ZHT-230207010S, ZHT-230207011R

Manufacturer

Shenzhen AUTOOL Technology Co., Ltd.
Stock, Workshop 2, Hezhou Anle Industrial Park, Hezhou Community, Hangcheng Street, Bao'an District, Shenzhen, China
Email: aftersale@autooltech.com

Other Company Information

COMPANY NAME: XDH Tech
ADDRESS: 2 Rue Coysevox Bureau 3, Lyon, France
E-Mail: xdh.tech@outlook.com
CONTACT PERSON: Dinghao Xue