Bestron ASW602 Crepe Maker - Instruction Manual

Introduction

Welcome to your new Bestron Crepe Maker! This manual provides all the necessary information for safe and enjoyable use of your appliance.

Product Overview

The Bestron ASW602 is designed for domestic and similar use, allowing you to make delicious crepes with ease. It features an infinitely adjustable temperature control and indicator lights for power and readiness.

Safety Instructions

• This appliance is not intended for professional use.
• Ensure your mains voltage matches the voltage shown on the rating plate.
• Always place the appliance on a stable, level surface.
• Parts of the appliance can become hot; avoid touching them.
• Ensure your hands are dry when touching the appliance, cord, or plug.
• Allow sufficient clearance around the appliance for heat dissipation; do not cover it.
• Keep the appliance, cord, and plug away from water, heat sources, and open flames.
• If the appliance comes into contact with water, immediately remove the plug from the socket.
• Never let the cord hang over the edge of a sink, worktop, or table.
• Always remove the plug from the socket when not in use.
• Remove the plug by pulling the plug itself, not the cord.
• Do not use the appliance if the cord is damaged.
• Do not operate with external timers or remote control systems.
• If the appliance or cord is defective, do not attempt self-repair. Contact a qualified technician.
• Do not move the appliance when it is on or hot.
• Do not place heavy objects on the lid.
• Never use the device near birds, as fumes from the non-stick coating can be harmful.
• Children aged 8 and above, and persons with reduced capabilities, can use the appliance under supervision and if they understand the risks.
• Children are not permitted to clean or maintain the appliance unless supervised and over 8 years old.
• Keep the appliance and cord out of reach of children under 8.
• Supervise children to ensure they do not play with the appliance.

Environmental Considerations

Dispose of packaging materials in designated containers. Do not dispose of the product as normal household waste at the end of its life. Hand it in at a collection point for recycling electrical and electronic equipment. Your municipality can provide information on local collection points.

Technical Specifications

Operation - First Use

1. Remove packaging.
2. Clean the baking plate to remove any manufacturing residues and dry thoroughly.
3. Plug in the appliance and allow it to heat for 10 minutes to remove any packaging odors. A slight smell or smoke is normal during the first use. Ensure adequate ventilation.

Operation - Preheating

1. Turn the temperature dial to the desired setting. The power and ready indicator lights will illuminate.
2. Wait until the green 'ready' indicator light turns off. The appliance is now at the correct temperature.

Operation - Basic Crepe Recipe

Ingredients:

• 125g flour
• 2 eggs
• 2g salt
• 250ml milk
• 20g sugar
• 20g butter
• Optional: 2g vanilla essence

Mix flour, salt, and sugar in a bowl. Add eggs and mix. Gradually add milk while mixing until a smooth batter forms. Add vanilla if desired. Mix in butter and let the batter rest for 30 minutes. Bake crepes, ensuring not to use too much batter and spreading it evenly.

Operation - Baking Crepes

1. Prepare crepe batter as per the basic recipe or use ready-made batter.
2. Preheat the appliance as described above.
3. Grease the baking plate with oil or butter using a brush.
4. Pour the desired amount of batter onto the plate, ensuring it does not overflow. Use the spreader to distribute the batter evenly.
5. Turn the crepe once or twice during baking using the wooden spatula.
6. Bake until golden brown.
7. Carefully remove the crepes with a heat-resistant spatula to avoid damaging the non-stick coating.
8. Once finished, unplug the appliance and allow it to cool completely.

Note: Crepe preparation typically takes 3-5 minutes, depending on the batter and personal preference. Do not use sharp utensils.

Cleaning and Maintenance

1. Unplug the appliance and let it cool completely.
2. Clean the appliance with a damp cloth, using mild soapy water if necessary. Ensure no liquid enters the appliance.
3. Dry the appliance thoroughly.
4. Store the crepe maker.

Caution: Ensure the appliance is unplugged before cleaning. Do not use abrasive cleaners or sharp objects. Never immerse the appliance, cord, or plug in water or other liquids.

Service

For any malfunctions, please contact Bestron customer service at www.bestron.com/service.