INSTALLATION GUIDE

The Ælement Fusion's small, customizable light ring reader offers a discreet electronic lock for any type of building looking to deploy electronic access control with a stylish, yet technologically-advanced solution. Salto offers a variety of door handles and finishes to complement any door style. The Ælement Fusion ANSI version is specially designed to fit on ANSI standards profile doors.

Specifications and Dimensions

• Maximum door thickness: 4-15/16" (125mm)
• Minimum door thickness: 11/16" (17mm)
• Maximum backset: 2-1/8" (55mm)
• Spindle size: 21/64" (8mm)
• Door thickness range: 1-3/4" (45mm) to 4-15/16" (125mm)

Note: Only SALTO spindles are compatible.

Components:

• BOLT (Depending on door thickness)
• PZ2 (x2)
• ALLEN 3 (x2)
• CABLE CLAMP (x2)

Diagrams:

The document includes detailed diagrams illustrating the installation process, component placement, and orientation for both outside and inside parts of the lock.

Lock and control must be aligned.

Assembly Steps

1. Component Identification: Diagrams show the reader cover, batteries (LR06 AA), control unit, reader, outside lever, outside spindle, privacy thumbturn, inside spindle, and inside lever.
2. Preparation: Refer to document 221373 or 4DS00020 for door preparation. Mounting with other spindles voids the warranty. Screws and spindles are included in the reader box.
3. Installation: Follow numbered steps (1-12) which detail the process of attaching components, connecting cables, and ensuring correct orientation.
4. Orientation: Ensure correct UP orientation for the reader and internal components. Incorrect orientation is indicated by a red cross ❌.
5. Cable Connection: Select the appropriate cable connection option (6a or 6b) based on the reader's position. Connect the lock and reader cables securely.
6. Plugging In: Connect the plugs for the mortise lock cable and reader cable. Ensure correct connection as shown in diagrams 7a, 7b, 8a, and 8b.
7. Final Assembly: Complete the assembly by attaching the remaining parts, ensuring all connections are secure.
8. Important Note: At the point of final assembly, do not close the door. Program the lock first.

Emergency Opening

1. Emergency Opening Procedure: The guide details how to perform an emergency opening using specific components like PPD800 and SP226093.
2. Methods: Two methods (a and b) are illustrated for emergency opening, involving specific actions with the lock components.

Use and Maintenance

• Operating Conditions: 0°C < t < 60°C. Use in non-condensing environments.
• Battery Change: Instructions are provided for changing the batteries, including diagrams and warnings.

Additional Information

• For customer lever set installation recommendations, refer to document 4AN01299.
• Ensure correct alignment of the lock and control.
• Pay attention to warnings, such as those for metal surfaces.