Salto Ælement for EURO Mortise Lock Installation Guide

Installation Steps

Step 1: Preparation

The diagram shows the initial components and their placement on the door.

Step 2: Mortise Lock Installation

Detailed diagrams illustrate the insertion and securing of the mortise lock mechanism. Ensure the groove is on the same side as the grub screw.

Note: The mortise lock itself is not included with the Ælement.

Step 3: Handle and Cylinder Installation

Illustrations show the attachment of the handles and the cylinder mechanism.

Step 4: Securing the Ælement Unit

This section details how to attach the main Ælement unit to the door, differentiating between the outside and inside components.

Step 5: Internal Mechanism Assembly

Diagrams show the assembly of internal components within the Ælement unit.

Step 6: Power Connection

The diagram indicates the use of a PZ2 screwdriver for securing components and shows the battery compartment.

Step 7: Battery Installation and Alignment

Instructions are provided for installing batteries (LR03 type) and securing the unit with a screw to maintain alignment.

Warning: Fasten with screw to keep it aligned.

Step 8: Cable Connections

This step details the connection of various cables:

• READER CABLE: Connects the reader.
• JUMPER: For specific configuration settings.
• WIRELESS CABLE*: (*Only available in AE9W model) For wireless communication.
• LOCK CABLE: Connects to the lock mechanism.

Step 9: Final Assembly

Diagrams 'a' and 'b' show the final steps of assembling the handles and securing the unit.

Step 10: Initial Programming

Crucial Instruction: AT THIS POINT DO NOT CLOSE THE DOOR. PROGRAM THE LOCK FIRST.

This instruction is provided in multiple languages: English, German, Spanish, French, and Korean.

Use a Torx T10 tamper screwdriver for this step.